Search results

This paper aims to propose a new linear parameter varying (LPV) controller for the robot tracking control problem. Using the identification of the robot dynamics in different work space points about modeling trajectory based on the least square of error algorithm, an LPV model for the robotic arm is extracted.

Parameter set mapping based on parameter component analysis results in a reduced polytopic LPV model that reduces the complexity of the implementation. An approximation of the required torque is computed based on the reduced LPV models. The state-feedback gain of each zone is computed by solving some linear matrix inequalities (LMIs) to sufficiently decrease the time derivative of a Lyapunov function. A novel smoothing method is used for the proposed controller to switch properly in the borders of the zones.

The polytopic set of the resulting gains creates the smooth switching polytopic LPV (SS-LPV) controller which is applied to the trajectory tracking problem of the six-degree-of-freedom PUMA 560 robotic arm. A sufficient condition ensures that the proposed controller stabilizes the polytopic LPV system against the torque estimation error.

Smoothing of the switching LPV controller is performed by defining some tolerances and creating some quasi-zones in the borders of the main zones leading to the compressed main zones. The proposed torque estimation is not a model-based technique; so the model variation and other disturbances cannot destroy the performance of the suggested controller. The proposed control scheme does not have any considerable computational load, because the control gains are obtained offline by solving some LMIs, and the torque computation is done online by a simple polytopic-based equation.

In this paper, a new SS-LPV controller is addressed for the trajectory tracking problem of robotic arms. Robot workspace is zoned into some main zones in such a way that the number of models in each zone is almost equal. Data obtained from the modeling trajectory is used to design the state-feedback control gain.

The purpose of this paper is to provide a parametric description (parametrization) of all static output feedback stabilizing controllers for linear stochastic discrete‐time systems with Markovian switching, applications of this result to simultaneous and robust stabilization problems and obtaining of algorithms for computing stabilizing gains.

The proposed approach presents parameterization in terms of coupled linear matrix equations and quadratic matrix inequalities which depend on parameter matrices similar to weight matrices in linear quadratic regulator (LQR) theory. To avoid implementation problems, a convex approximation technique is used and linear matrix inequalities (LMI)‐based algorithms are obtained for computing of stabilizing gain.

The algorithms obtained in this paper are non‐iterative and used computationally efficient LMI technique. Moreover, it is possible to use well‐known LQR methodology in the process of controller design.

As a result of this paper, a new unified approach to design of static output feedback stabilizing control is developed. This approach leads to efficient stabilizing gain computation algorithms for both stochastic systems with Markovian switching and deterministic systems with polytopic uncertainty.

The purpose of this paper is to look at the problem of fault tolerant control (FTC) for discrete time nonlinear system described by Interval Type-2 Takagi–Sugeno (IT2 TS) fuzzy model subjected to stochastic noise and actuator faults.

An IT2 fuzzy augmented state observer is first developed to estimate simultaneously the system states and the actuator faults since this estimation is required for the design of the FTC control law. Furthermore, based on the information of the states and the faults estimate, an IT2 fuzzy state feedback controller is conceived to compensate for the faults effect and to ensure a good tracking performance between the healthy system and the faulty one. Sufficient conditions for the existence of the IT2 fuzzy controller and the IT2 fuzzy observer are given in terms of linear matrix inequalities which can be solved using a two-step computing procedure.

The paper opted for simulation results which are applied to the three-tank system. These results are presented to illustrate the effectiveness of the proposed FTC strategy.

In this paper, the problem of active FTC design for noisy and faulty nonlinear system represented by IT2 TS fuzzy model is treated. The developed IT2 fuzzy fault tolerant controller is designed such that it can guarantee the stability of the closed-loop system. Moreover, the proposed controller allows to accommodate for faults, presents a satisfactory state tracking performance and outperforms the traditional type-1 fuzzy fault tolerant controller.

The purpose of this paper is to concern the design of a robust model predictive controller for distributed networked systems with transmission delays.

The overall system is composed of a number of interconnected nonlinear subsystems with time-varying transmission delays. A distributed networked system with transmission delays is modeled as a nonlinear system with a time-varying delay. Time delays appear in distributed systems due to the information transmission in the communication network or transport of material between the sub-plants. In real applications, the states may not be available directly and it could be a challenge to address the control problem in interconnected systems using a centralized architecture because of the constraints on the computational capabilities and the communication bandwidth. The controller design is characterized as an optimization problem of a “worst-case” objective function over an infinite moving horizon.

The aim is to propose control synthesis approach that depends on nonlinearity and time varying delay characteristics. The MPC problem is represented in a time varying delayed state feedback structure. Then the synthesis sufficient condition is provided in the form of a linear matrix inequality (LMI) optimization and is solved online at each time instant. In the rest, an LMI-based decentralized observer-based robust model predictive control strategy is proposed.

The authors develop RMPC strategies for a class of distributed networked systems with transmission delays using LMI-Based technique. To evaluate the applicability of the developed approach, the control design of a networked chemical reactor plant with two sub-plants is studied. The simulation results show the effectiveness of the proposed method.

The purpose of this manuscript, a state feedback gain depends on the optimal design of fractional order PID controller to time-delay system is established. In established optimal design known as advanced cuttlefish optimizer and random decision forest that is combined performance of random decision forest algorithm (RDFA) and advanced cuttlefish optimizer (ACFO).

The proposed ACFO uses the concept of crossover and mutation operator depend on position upgrading to enhance its search behavior, calculational speed as well as convergence profile at basic cuttlefish optimizer.

Fractional order proportional-integrator-derivative (FOPID) controller, apart from as tuning parameters (kp, ki and kd) it consists of two extra tuning parameters λ and µ. In established technology, the increase of FOPID controller is adjusted to reach needed responses that demonstrated using RDFA theory as well as RDF weight matrices is probable to the help of the ACFO method. The uniqueness of the established method is to decrease the failure of the FOPID controller at greater order time delay method with the help of controller maximize restrictions. The objective of the established method is selected to consider parameters set point as well as achieved parameters of time-delay system.

In the established technique used to evade large order delays as well as reliability restrictions such as small excesses, time resolution, as well as fixed condition defect. These methods is implemented at MATLAB/Simulink platform as well as outcomes compared to various existing methods such as Ziegler-Nichols fit, curve fit, Wang method, regression and invasive weed optimization and linear-quadratic regression method.

The purpose of this paper is to investigate an optimal control solution with prescribed degree of stability for the position and tracking control problem of the twin rotor multiple input-multiple output (MIMO) system (TRMS). The twin rotor MIMO system is a benchmark aerodynamical laboratory model having strongly non-linear characteristics and unstable coupling dynamics which make the control of such system for either posture stabilization or trajectory tracking a challenging task.

This paper first describes the dynamical model of twin rotor MIMO system (TRMS) and then it adopts linear-quadratic regulator (LQR)-based optimal control technique with prescribed degree of stability to achieve the desired trajectory or posture stabilization of TRMS.

The simulation results show that the investigated controller has both static and dynamic performance; therefore, the stability and the quick control effect can be obtained simultaneously for the twin rotor MIMO system.

The articles on LQR optimal controllers for TRMS can also be found in many literatures, but the prescribed degree of stability concept was not discussed in any of the paper. In this work, new LQR with the prescribed degree of stability concept is applied to provide an optimal control solution for the position and tracking control problem of TRMS.

The problem of robotic co-manipulation is often addressed using impedance control based methods where the authors seek to establish a mathematical relation between the velocity of the human-robot interaction point and the force applied by the human operator (HO) at this point. This paper aims to address the problem of co-manipulation for handling tasks seen as a constrained optimal control problem.

The proposed point of view relies on the implementation of a specific online trajectory generator (OTG) associated with a kinematic feedback loop. This OTG is designed so as to translate the HO intentions to ideal trajectories that the robot must follow. It works as an automaton with two states of motion whose transitions are controlled by comparing the magnitude of the force to an adjustable threshold, in order to enable the operator to keep authority over the robot's states of motion.

To ensure the smoothness of the interaction, the authors propose to generate a velocity profile collinear to the force applied at the interaction point. The feedback control loop is then used to satisfy the requirements of stability and of trajectory tracking to guarantee assistance and operator security. The overall strategy is applied to the penducobot problem.

The approach stands out for the nature of the problem to be tackled (heavy load handling tasks) and for its vision on the co-manipulation. It is based on the implementation of two main ingredients. The first one lies in the online generation of an appropriate trajectory of the interaction point located at the end-effector and describing the HO intention. The other consists in the design of a control structure allowing a good tracking of the generated trajectory.

The purpose of the paper is to design a new attitude stabilization system for a microsatellite based on single gimbal control moment gyro (SGCMG) in which the gimbal rates are selected as controller parameters.

In the stability mode, linear quadratic regulator (LQR) and linear quadratic Gaussian (LQG) control strategies are presented with the gimbal rates as a controller parameters. Instead of developing a control torque to solve the attitude problem, the attitude controller is developed in terms of the control moment gyroscope gimbal angular velocities. Attitude control torques are generated by means of a four SGCMG pyramid cluster.

Numerical simulation results are provided to show the efficiency of the proposed controllers. Simulation results show that this method could stabilize satellite from initial condition with large angles and with more accuracy in comparison with feedback quaternion and proportional-integral-derivative controllers. These results show the effect of filtering the noisy signal in the LQG controller. LQG in comparison to LQR is more realistic.

The LQR method is more appropriate for the systems that have project models reasonably exact and ideal sensors/actuators. LQG is more realistic, and it can be used when not all of the states are available or when the system presents noises. LQR/LQG controller can be used in the stabilization mode of satellite attitude control.

The originality of this paper is designing a new attitude stabilization system for an agile microsatellite using LQR and LQG controllers.

States that control is of the essence in cybernetics. Summarizes the dynamic equations for a flexible one‐link manipulator moving in the horizontal plane. Employs the finite element method, based on elementary beam theory, during the process of formulation. Develops and instruments a one‐link flexible manipulator in order to control its vibration modes. Uses a simple second‐order vibration model which permits vibrations on the rod to be estimated using the hub angle. The validation of the dynamic model and the structural analysis of the flexible manipulator is reached using proper infrared cameras and active light sources for determining actual positions of objects in space. Shows that the performance of the control is satisfactory, even under perturbation action.

This paper aims to implement a maiden methodology for load frequency control of an AC multi micro-grid (MG) by using hybrid fractional order fuzzy PID (FOFPID) controller and linear quadratic Gaussian (LQG).

The multi MG system considered is consisting of photovoltaic, wind turbine and a synchronous generator. Different energy storage devices i.e. battery energy storage system and flywheel energy storage system are also integrated to the system. The renewable energy sources suffer from uncertainty and fluctuation from their nominal values, which results in fluctuation of system frequency. Inspired by this difficulty in MG control, this research paper proposes a hybridized FOFPID and LQG controller under random and stochastic environments. Again to confer viability of proposed controller its performances are compared with PID, fuzzy PID and fuzzy PID-LQG controllers. A comparative study among all implemented techniques i.e. proposed multi-verse optimization (MVO) algorithm, particle swarm optimization and genetic algorithm has been done to justify the supremacy of MVO algorithm. To check the robustness of the controller sensitivity analysis is done.

The merged concept of fractional calculus and state feedback theory is found to be efficient. The designed controller is found to be capable of rejecting the effect of disturbances present in the system.

From the study, the authors observed that the proposed hybrid FOPID and LQG controller is robust hence, there is no need to reset the controller parameters with a large change in network parameters.