Search results

The purpose of this paper is to solve the problem that the location of the initiation point cannot be measured accurately in the shallow underground space, this paper proposes a method, which is based on fusion of multidimensional vibration sensor information, to locate single shallow underground sources.

First, in this paper, using the characteristics of low multipath interference and good P-wave polarization in the near field, the adaptive covariance matrix algorithm is used to extract the polarization angle information of the P-wave and the short term averaging/long term averaging algorithm is used to extract the first break travel time information. Second, a hybrid positioning model based on travel time and polarization angle is constructed. Third, the positioning model is taken as the particle update fitness function of quantum-behaved particle swarm optimization and calculation is performed in the hybrid positioning model. Finally, the experiment verification is carried out in the field.

The experimental results show that, with root mean square error, spherical error probable and fitness value as evaluation indicators, the positioning performance of this method is better than that without speed prediction. And the positioning accuracy of this method has been improved by nearly 30%, giving all of the three tests a positioning error within 0.5 m and a fitness less than 1.

This method provides a new idea for high-precision positioning of shallow underground single source. It has a certain engineering application value in the fields of directional demolition of engineering blasting, water inrush and burst mud prediction, fuze position measurement, underground initiation point positioning of ammunition, mine blasting monitoring and so on.

Scientific research is producing ever‐increasing amounts of quantitative data worthy of communication to scholars, but more than can be accommodated in refereed publications even though the number of journals is itself increasing. In the last twenty years, the quantity of geochemical analytical data produced world‐wide has increased a hundredfold or more. Geochemical and petrological journals nowadays rarely publish the complete sets of data; instead, only selected representative data are published and the remainder may or may not be put into supplementary publications. In the last five years, a scheme has been set up in the UK which co‐ordinates geochemical publications with a growing computerised geochemical data bank. The data bank comprises not only the geochemical analytical data actually printed on the journal pages but also the remainder of the data set pertaining to the published paper which could not be printed for lack of space. In collaboration with the journal editor, the data are collected into the data bank at the same time as the author is submitting his or her paper for publication. The author enters the data in a standard format and sends them as hard copy or in machine‐readable form to the data bank editor. The editor verifies the data and passes them for archiving to the National Geochemical Data Bank manager of the British Geological Survey whence they can be retrieved. The data are also relayed to the World Data Center for storage and further distribution.

Measures are comparable if and only if measurement equivalence has been demonstrated. Although comparability and equivalence of measures are sometimes used interchangeably, we advocate a subtle but important difference in meaning. Comparability implies that measures from one group can be compared with measures from another group. It is a property of the measures, which is given or not. In particular, comparability presumes valid measures within each group compared. Measurement equivalence, by contrast, refers to the way measures are derived and estimated. It is intrinsically tied to the underlying theory of measurement. Thus, measurement equivalence cannot be dealt with in isolation. Its assessment has to be incorporated into the theoretical framework of measurement. Measurement equivalence is closely connected to construct validity for it refers to the way manifest indicators are related to the latent variable, within a particular culture and across different cultures. From this it follows that equivalence cannot, or should not, be treated as a separate issue but as a constitutive element of validity. A discussion of measurement equivalence without addressing validity would be incomplete.

In this paper, we develop and evaluate an approach to assessing the content quality in a location‐based service (LBS). The proposed approach, instead of assessing the quality in absolute terms such as completeness or accuracy, measures the effect that the imperfection of the content is having on the reliability of that specific LBS. We apply the basic ideas from Software Reliability Engineering (SRE), but develop a modification of SRE, 2‐Branch, in order to separate content quality from other factors, such as positioning imprecision, and to reduce the measurement error. In our experimental study, we first compare 2‐Branch to the standard SRE, after which we experimentally analyze some properties of SRE methodology as such in the context of an LBS. The experiments indicate that 2‐Branch has in most cases a lower measurement error than the standard SRE. A corollary to that is that 2‐Branch can achieve, therefore, as low an error level as the standard SRE, using a worse and thus cheaper oracle. Getting a good oracle is probably the main cost factor in evaluating the quality of an information service, thus being able to use a cheaper one may result in significant savings.

To develop a numerical technique for solving the inverse source problem associated with the constant coefficients convection‐diffusion equation.

The proposed numerical technique is based on the boundary element method (BEM) combined with an iterative sequential quadratic programming (SQP) procedure. The governing convection‐diffusion equation is transformed into a Helmholtz equation and the ill‐conditioned system of equations that arises after the application of the BEM is solved using an iterative technique.

The iterative BEM presented in this paper is well‐suited for solving inverse source problems for convection‐diffusion equations with constant coefficients. Accurate and stable numerical solutions were obtained for cases when the number of sources is correctly estimated, overestimated, or underestimated, and with both exact and noisy input data.

The proposed numerical method is limited to cases when the Péclet number is smaller than 100. Future approaches should include the application of the BEM directly to the convection‐diffusion equation.

Applications of the results presented in this paper can be of value in practical applications in both heat and fluid flow as they show that locations and strengths for an unknown number of point sources can be accurately found by using boundary measurements only.

The BEM has not as yet been employed for solving inverse source problems related with the convection‐diffusion equation. This study is intended to approach this problem by combining the BEM formulation with an iterative technique based on the SQP method. In this way, the many advantages of the BEM can be applied to inverse source convection‐diffusion problems.

A process improvement sampling methodology, known as process variation diagnostic tool (PROVADT), was proposed by Cox et al. (2013). The method was designed to support the objectivity of Six Sigma projects performing the measure-analyse phases of the define-measure-analyse-improve-control cycle. An issue in PROVADT is that it is unable to distinguish between measurement and product variation in the presence of a poor Gage repeatability and reproducibility (R&R) result. The purpose of this paper is to improve and address PROVADT’s sampling structure by enabling a true Gage R&R as part of its design.

This paper derives an enhanced PROVADT method by examining the theoretical sampling constraints required to perform a Gage R&R study. The original PROVADT method is then extended to fulfil these requirements. To test this enhanced approach, it was applied first to a simulated manufacturing process and then in two industry case studies.

The results in this paper demonstrates that enhanced PROVADT was able to achieve a full Gage R&R result. This required 20 additional measurements when compared to the original method, but saved up to ten additional products and 20 additional measurements being taken in future experiments if the original method failed to obtain a valid Gage R&R. These benefits were highlighted in simulation and industry case studies.

The work into the PROVADT method aims to improve the objectivity of early Six Sigma analyses of quality issues, which has documented issues.

Aim of the present monograph is the economic analysis of the role of MNEs regarding globalisation and digital economy and in parallel there is a reference and examination of some legal aspects concerning MNEs, cyberspace and e‐commerce as the means of expression of the digital economy. The whole effort of the author is focused on the examination of various aspects of MNEs and their impact upon globalisation and vice versa and how and if we are moving towards a global digital economy.

The concept and practice of e-services has become essential in business transactions. Yet there are still many organizations that have not developed e-services optimally. This is especially relevant in the context of Indonesian Airline companies. Therefore, many airline customers in Indonesia are still in doubt about it, or even do not use it. To fill this gap, this study attempts to develop a model for e-services adoption and empirically examines the factors influencing the airlines customers in Indonesia in using e-services offered by the Indonesian airline companies. Taking six Indonesian airline companies as a case example, the study investigated the antecedents of e-services usage of Indonesian airlines. This study further examined the impacts of motivation on customers in using e-services in the Indonesian context. Another important aim of this study was to investigate how ages, experiences and geographical areas moderate effects of e-services usage.

The study adopts a positivist research paradigm with a two-phase sequential mixed method design involving qualitative and quantitative approaches. An initial research model was first developed based on an extensive literature review, by combining acceptance and use of information technology theories, expectancy theory and the inter-organizational system motivation models. A qualitative field study via semi-structured interviews was then conducted to explore the present state among 15 respondents. The results of the interviews were analysed using content analysis yielding the final model of e-services usage. Eighteen antecedent factors hypotheses and three moderating factors hypotheses and 52-item questionnaire were developed. A focus group discussion of five respondents and a pilot study of 59 respondents resulted in final version of the questionnaire.

In the second phase, the main survey was conducted nationally to collect the research data among Indonesian airline customers who had already used Indonesian airline e-services. A total of 819 valid questionnaires were obtained. The data was then analysed using a partial least square (PLS) based structural equation modelling (SEM) technique to produce the contributions of links in the e-services model (22% of all the variances in e-services usage, 37.8% in intention to use, 46.6% in motivation, 39.2% in outcome expectancy, and 37.7% in effort expectancy). Meanwhile, path coefficients and t-values demonstrated various different influences of antecedent factors towards e-services usage. Additionally, a multi-group analysis based on PLS is employed with mixed results. In the final findings, 14 hypotheses were supported and 7 hypotheses were not supported.

The major findings of this study have confirmed that motivation has the strongest contribution in e-services usage. In addition, motivation affects e-services usage both directly and indirectly through intention-to-use. This study provides contributions to the existing knowledge of e-services models, and practical applications of IT usage. Most importantly, an understanding of antecedents of e-services adoption will provide guidelines for stakeholders in developing better e-services and strategies in order to promote and encourage more customers to use e-services. Finally, the accomplishment of this study can be expanded through possible adaptations in other industries and other geographical contexts.

The purpose of this paper is to extract the location attributes, which are the most important for market value of real estate in countries with well‐developed markets.

In this paper meta‐analysis is applied for extraction of location attributes and the weights of their importance. The outcomes of existing regression models created in different countries mainly with a developed real estate market are used. A total of 81 models described in 39 sources are analysed.

The paper finds that the lists of statistically significant location attributes, which influence market value, are obtained for different real estate types. The weights of attributes' relative influence are compared, where possible.

In the paper meta‐analysis is also applied for a limited number of empirical studies. However, for land and residential real estate the number of sources is sufficient to make a substantiated conclusion. The application of the outlined location attributes is a subject for future research.

The paper shows that the lists of important location attributes can be used for practical specification of the valuation models for urban land and other real estate in countries where the market is underdeveloped, to increase the degree of objectivity and market orientation.

The paper is one of the few studies which synthesize the findings of existing regression models with respect to location attributes generally. The method of weights' estimation is original. The result of the paper has practical value for real estate valuation in countries with an underdeveloped market.