Search results

The purpose of this review paper is to outline the parachute materials and its behavior. To enhance parachute life, it is highly desirable to consider the commercial angle for any parachute manufacturing industry and its components under varying operational conditions. Hence, the knowledge of various textile materials and operational conditions which contributes the parachute strength and durability will be helpful for industries/researchers.

This section is not applicable for a review paper.

Parachute is a material used in numerous real-time applications such as man-drop, cargo delivery, aircraft recovery and aircraft decelerator which drastically reduces human efforts and time. However, each application requires a unique design and fabric selection to achieve the area of drag needed and the terminal velocity of the parachute material while in flight. For designing a man-drop parachute, the most critical parameters are weight and strength which must be considered during manufacturing. The army person uses the man-drop parachute, which must be as light as possible.

This paper is an original review work and will be helpful for parachute manufacturers/researchers to enhance the life of parachutes with improved functionality.

The purpose of this study is to establish a method for accurately extracting torch and seam features. This will improve the quality of narrow gap welding. An adaptive deflection correction system based on passive light vision sensors was designed using the Halcon software from MVtec Germany as a platform.

This paper proposes an adaptive correction system for welding guns and seams divided into image calibration and feature extraction. In the image calibration method, the field of view distortion because of the position of the camera is resolved using image calibration techniques. In the feature extraction method, clear features of the weld gun and weld seam are accurately extracted after processing using algorithms such as impact filtering, subpixel (XLD), Gaussian Laplacian and sense region for the weld gun and weld seam. The gun and weld seam centers are accurately fitted using least squares. After calculating the deviation values, the error values are monitored, and error correction is achieved by programmable logic controller (PLC) control. Finally, experimental verification and analysis of the tracking errors are carried out.

The results show that the system achieves great results in dealing with camera aberrations. Weld gun features can be effectively and accurately identified. The difference between a scratch and a weld is effectively distinguished. The system accurately detects the center features of the torch and weld and controls the correction error to within 0.3mm.

An adaptive correction system based on a passive light vision sensor is designed which corrects the field-of-view distortion caused by the camera’s position deviation. Differences in features between scratches and welds are distinguished, and image features are effectively extracted. The final system weld error is controlled to 0.3 mm.

The objective of this study was to develop wearable suit platforms with various anchoring structure designs with the intention of improving wearability and enhancing user satisfaction.

This study selected fabrics and materials for the suit platform through material performance tests. Two anchoring structure designs, 11-type and X-type are compared with regular clothing under control conditions. To evaluate the comfort level of the wearable suit platform, a satisfaction survey and electroencephalogram (EEG) measurements are conducted to triangulate the findings.

The 11-type exhibited higher values in comfort indicators such as α, θ, α/High-β and lower values in concentration or stress indicators such as β, ϒ, sensorimotor rhythm (SMR)+Mid-β/θ, and a spectral edge frequency of 95% compared to the X-type while walking. The 11-type offers greater comfort and satisfaction compared to the X-type when lifting based on the EEG measurements and the participants survey.

It is recommended to implement the 11-type when designing wearable suit platforms. These findings offer essential data on wearability, which can guide the development of soft wearable robots.

Post-COVID-19, public K–12 schools are still facing the consequences of the years of interrupted learning. Schools serving minoritized students are particularly at risk for facing challenges with academics, behavior and student social emotional health. The university counseling programs are in positions to build capacity in urban schools while also supporting counselors-in-training through service-learning opportunities.

The following conceptual manuscript demonstrates how counselor education counseling programs and public schools can harness the capacity-building benefits of university–school partnerships. While prevalent in fields like special education, counselor educators have yet to heed the hall to participate in mutually beneficial partnership programs.

Using the multi-tiered systems of support (MTSS) and the components of the university–school partnerships, counselor educators and school stakeholders can work together to support student mental health, school staff well-being and counselor-in-training competence.

The benefits and opportunities within the university–school partnerships are well documented. However, few researchers have described a model to support partnerships between the university counseling programs and urban elementary schools. We provide a best practice model using the principles of university–school partnerships and a school’s existing MTSS framework.

The innovativeness of dressmakers is a concern to respondents to satisfy their clothing needs. The purpose of this study is to determine the criteria that respondents use to judge the quality of clothing and its influences on the innovative ability of dressmakers in the clothing manufacturing industries.

Three hundred and ninety-seven (397) respondents in the Takoradi Metropolis of Ghana filled out a questionnaire, and the results were used to compile data for the study. The sample size was calculated using Miller and Brewer formula. The data was analysed using structural equational modelling with the SmartPLS v.4 software.

The results showed that respondents are very interested in the calibre of clothing produced by their dressmakers. However, the study revealed that when evaluating the quality of a garment, respondents do not simply accept what has been sewn for them but also consider the performance, appearance, fit and shape of the garment. Findings revealed that there was a significant relationship between garment appearance quality (t = 2.605; p < 0.05), garment performance quality (t = 3.915; p < 0.05), garment shape quality (t = 6.248; p <0.05) and fashion innovations. Subsequently, the evaluation of garment fit quality by respondents revealed it does not bring about innovations (t = 1.310; p > 0.05).

The continuous evaluation of custom-made clothing from customers will go a long way towards highlighting the relative criteria they use to evaluate the innovation of dressmakers. This will help improve the creativity of the dressmakers since such feedback will help them understand and innovate their production skills to meet the preferences of customers.

The present study provides an in-depth understanding of how garment quality evaluation by customers influences the innovation of dressmakers in Takoradi, Ghana. The constructs were developed for the study to capture the appropriate data from customers for the study. This presents an evaluation criterion on four garment quality variables imperative for use or modification by other studies.

Sizing system is a fundamental topic in garment fitting. The purpose of this study was to assess the fit of existing police uniforms (shirt, jacket, overcoat and trousers) and develop a sizing system for upper and lower body uniforms of Amhara policemen in Ethiopia.

In total, 35 body dimensions of 889 policemen were taken through a manual anthropometric survey following the procedures in ISO 8559:1989 after each subject was interviewed on issues related to garment fit. The anthropometric data were pre-processed, key body dimensions were identified by principal components analysis and body types were clustered by the agglomerative hierarchical clustering algorithm and verified by the XGBoost classifier in a Python programming environment. The developed size charts were validated statistically using aggregate loss and accommodation rate.

About 44% of the subjects encountered fit problems every time they own new readymade uniforms. Lengths and side seams of shirts, and lengths and waist girths of trousers are the most frequently altered garment sites. Analysis of the anthropometric measurements resulted in 13 and 15 sizes for the upper and lower bodies, respectively. Moreover, the comparison of the developed upper garment size chart with the existing size chart for a shirt showed a considerable difference. This indicates that inappropriate size charts create fit problems.

The study considers the analysis of fit problems and sizing system development in a less researched country. Moreover, the proposed data mining procedure and its application for size chart development is unique and workable.

Selective laser sintering (SLS) is an essential technology in the field of additive manufacturing. However, SLS technology is limited by the traditional point-laser sintering method and has reached the bottleneck of efficiency improvement. This study aims to develop an image-shaped laser sintering (ISLS) system based on a digital micromirror device (DMD) to address this problem. The ISLS system uses an image-shaped laser light source with a size of 16 mm × 25.6 mm instead of the traditional SLS point-laser light source.

The ISLS system achieves large-area image-shaped sintering of polymer powder materials by moving the laser light source continuously in the x-direction and updating the sintering pattern synchronously, as well as by overlapping the splicing of adjacent sintering areas in the y-direction. A low-cost composite powder suitable for the ISLS system was prepared using polyether sulfone (PES), pinewood and carbon black (CB) powders as raw materials. Large-sized samples were fabricated using composite powder, and the microstructure, dimensional accuracy, geometric deviation, density, mechanical properties and feasible feature sizes were evaluated.

The experimental results demonstrate that the ISLS system is feasible and can print large-sized parts with good dimensional accuracy, acceptable geometric deviations, specific small-scale features and certain density and mechanical properties.

This study has achieved the transition from traditional point sintering mode to image-shaped surface sintering mode. It has provided a new approach to enhance the system performance of traditional SLS.

This study aims to examine the export competitiveness of Vietnam’s apparel sector by identifying the precise product categories that create its comparative advantage.

Revealed comparative advantage (RCA) and normalized revealed comparative advantage (NRCA) form the research methodology, and the RCA/NRCA values are calculated for the 2011–2020 period.

In total, 29 out of 34 product categories at four-digit levels and 65 out of 217 subcategories at six-digit levels elicited a consistent export comparative advantage throughout the 10-year study timeframe. The study also identified 13 subcategories at six-digit levels, which indicated 10 consecutive years of relative disadvantages.

The study’s findings have far-reaching implications for economic policy, development strategies and global economic integration. By providing a nuanced understanding of a country’s export strengths in the international apparel trade, this study offers valuable guidance for informed decision-making at various levels. The findings will serve as a significant source of information for policymakers and help them formulate novel policies aiming to diversify Vietnam’s apparel product offerings and export destinations. The results will also inform the government regarding the industry’s potential and attract necessary support, enabling it to grow further. This study reveals patterns in Vietnam’s apparel trade but does not provide insights into the underlying causes of comparative advantage.

The study provides an in-depth overview of Vietnam’s comparative advantages and disadvantages at two-, four- and six-digit harmonized system levels and helps understand Vietnam’s apparel export competitiveness.

The research evaluated the feasibility of 3D dynamic fit utilizing female compression tops by comparatively analyzing the virtual and actual dynamic fit.

Six female participants were 3D body-scanned and photographed in compression tops in four types of athletic movements (pull-up, kettlebell swing, circle-crunch and sit-up). Fit measurements, waist cross-sectional areas, waist width, waist depth, numerical simulation of clothing pressure (kPa) and objective pressure measurements (kPa) were collected from 3D virtual animation, 3D fit scan data and actual photos with the four types of athletic motions. The data were comparatively investigated between virtual and actual dynamic fit.

The 3D-animated body was not reflected with human body deformation because only bone structure was changed while maintaining the constant forms of muscle and body surface in athletic movements. Due to this consistency of virtual dynamic fit, there were significant differences with the actual dynamic fit at the top length, shoulder width and waist cross-sectional areas. Also, the virtual dynamic pressure indicated significantly higher levels than the objective dynamic pressure while presenting no significant correlations at the front neckline, breast, lateral waist, upper back, back armhole and back waist.

This study is the first to verify multiple aspects of virtual dynamic fit using 3D digital technology. This study provided useful information about which aspects of the current virtual animation need to be improved to apply in the dynamic fit evaluation.

This paper aims to develop a specific type of mobile nonrigid support friction stir welding (FSW) robot, which can adapt to aluminum alloy trucks for rapid online repair.

The friction stir welding robot is designed to complete online repair according to the surface damage of large aluminum alloy trucks. A rotatable telescopic arm unit and a structure for a cutting board in the shape of a petal that was optimized by finite element analysis are designed to give enough top forging force for welding to address the issues of inadequate support and significant deformation in the repair process.

The experimental results indicate that the welding robot is capable of performing online surface repairs for large aluminum alloy trucks without rigid support on the backside, and the welding joint exhibits satisfactory performance.

Compared with other heavy-duty robotic arms and gantry-type friction stir welding robots, this robot can achieve online welding without disassembling the vehicle body, and it requires less axial force. This lays the foundation for the future promotion of lightweight equipment.

The designed friction stir welding robot is capable of performing online repairs without dismantling the aluminum alloy truck body, even in situations where sufficient upset force is unavailable. It ensures welding quality and exhibits high efficiency. This approach is considered novel in the field of lightweight online welding repairs, both domestically and internationally.