Search results

The purpose of this study is to forecast the mechanical properties of ternary blended concrete (TBC) modified with oyster shell powder (OSP) and shea nutshell ash (SNA) using deep neural network (DNN) models.

DNN models with three hidden layers, each layer containing 5–30 nodes, were used to predict the target variables (compressive strength [CS], flexural strength [FS] and split tensile strength [STS]) for the eight input variables of concrete classes 25 and 30 MPa. The concrete samples were cured for 3–120 days. Levenberg−Marquardt's backpropagation learning technique trained the networks, and the model's precision was confirmed using the experimental data set.

The DNN model with a 25-node structure yielded a strong relation for training, validating and testing the input and output variables with the lowest mean squared error (MSE) and the highest correlation coefficient (R) values of 0.0099 and 99.91% for CS and 0.010 and 98.42% for FS compared to other architectures. However, the DNN model with a 20-node architecture yielded a strong correlation for STS, with the lowest MSE and the highest R values of 0.013 and 97.26%. Strong relationships were found between the developed models and raw experimental data sets, with R² values of 99.58%, 97.85% and 97.58% for CS, FS and STS, respectively.

To the best of the authors’ knowledge, this novel research establishes the prospects of replacing SNA and OSP with Portland limestone cement (PLC) to produce TBC. In addition, predicting the CS, FS and STS of TBC modified with OSP and SNA using DNN models is original, optimizing the time, cost and quality of concrete.

Given the current friction and wear challenges faced by automobile parts and bearings, this study aims to identify a novel texture for creating anti-friction and wear-resistant surfaces. This includes detailing the preparation process with the objective of mitigating friction and wear in working conditions.

Femtosecond laser technology was used to create a mango-shaped texture on the surface of GCr15 bearing steel. The optimized processing technology of the texture surface was obtained through adjusting the laser scanning speed. The tribological behavior of the laser-textured surface was investigated using a reciprocating tribometer.

The friction coefficient of the mango-shaped texture surface is 25% lower than that of the conventional surface, this can be attributed to the reduced contact area between the friction ball and the micro-textured surface, leading to stress concentration at the extrusion edge and a larger stress distribution area on the contact part of the ball and disk compared to the conventional surface and the function of the micro-texture in storing wear chips during the sliding process, thereby reducing secondary wear.

The mango-shaped textured surface in this study demonstrates effective solutions for some of the friction and wear issues, offering significant benefits for equipment operation under light load conditions.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2024-0127/

The purpose of this paper is to create optimally located Facilitation Centers on this tourist circuit, evaluated through network analysis, thus creating an effective linkage between tourism and economic activities of the craftsmen who are the custodians of the cultural heritage of Puri.

The craft villages lying in and around this tourist circuit are surveyed to establish socio-economic condition of artisans, significance of the craft and spatial distribution of craft villages and the willingness of artisans to travel closer to the transport spine. Network analysis is used to assess the suitability of Facilitation Center location using travel time and distance as parameters. Finally, the sustainability of the Facilitation Centers is evaluated using a cost-benefit analysis (CBA).

The Facilitation Centers can be spatially developed at the strategic locations to expand tourist market. This will help in leveraging the economic benefits of tourism to a marginalized rural artisan community by creating a sustainable model.

The focus on festival can help to protect local cultural traditions, develop tourism and promote the economic, social and cultural developments of the destination. Dispersal strategies adopted aim to increase visitors' satisfaction with the product and thus entice them to stay longer in the destination.

Through a comprehensive examination of the significance of conserving and sustainably using oceans, seas, and marine resources, this chapter sheds light on how such endeavors contribute to sustainable development across social, economic, and environmental realms. Drawing on a plethora of case studies and analyses, the chapter also underscores the central role of marine ecosystems in supporting livelihoods, cultural identities, and economic growth. It showcases how tailored conservation strategies, rooted in the unique territorial identities of places, can yield better outcomes. By recognizing the intrinsic value of marine ecosystems and their interconnectedness with human well-being, the chapter underscores the urgency of collaborative efforts to achieve SDG 14, which seeks to establish a harmonious coexistence between humanity and the oceans for present and future generations.

The purpose of this paper is to review cases of artificial reefs built through additive manufacturing (AM) technologies and analyse their ecological goals, fabrication process, materials, structural design features and implementation location to determine predominant parameters, environmental impacts, advantages, and limitations.

The review analysed 16 cases of artificial reefs from both temperate and tropical regions. These were categorised based on the AM process used, the mortar material used (crucial for biological applications), the structural design features and the location of implementation. These parameters are assessed to determine how effectively the designs meet the stipulated ecological goals, how AM technologies demonstrate their potential in comparison to conventional methods and the preference locations of these implementations.

The overview revealed that the dominant artificial reef implementation occurs in the Mediterranean and Atlantic Seas, both accounting for 24%. The remaining cases were in the Australian Sea (20%), the South Asia Sea (12%), the Persian Gulf and the Pacific Ocean, both with 8%, and the Indian Sea with 4% of all the cases studied. It was concluded that fused filament fabrication, binder jetting and material extrusion represent the main AM processes used to build artificial reefs. Cementitious materials, ceramics, polymers and geopolymer formulations were used, incorporating aggregates from mineral residues, biological wastes and pozzolan materials, to reduce environmental impacts, promote the circular economy and be more beneficial for marine ecosystems. The evaluation ranking assessed how well their design and materials align with their ecological goals, demonstrating that five cases were ranked with high effectiveness, ten projects with moderate effectiveness and one case with low effectiveness.

AM represents an innovative method for marine restoration and management. It offers a rapid prototyping technique for design validation and enables the creation of highly complex shapes for habitat diversification while incorporating a diverse range of materials to benefit environmental and marine species’ habitats.

The Eastern Mediterranean countries exhibit diversity in religion, culture, politics, and economy, amid rapid and dynamic regional developments shaped by global polarization and the international security landscape, rendering future prognostications challenging. This chapter delves into the realms of oil and natural gas production, the influx of multinational corporations, water boundaries, and renewable energy vis-à-vis fossil fuels in the Eastern Mediterranean, elucidating the realities of cooperation and competition within the region. Analysis of cooperation and competition dynamics is imperative for comprehending the tensions among states. Enhanced cooperation between states may lead to mutual benefits, such as increased oil and gas prices favoring their partnership, while any escalation in competition can swiftly be perceived as a threat, exacerbating tensions. The desirability of such cooperation or competition in the international political economy remains subject to ongoing debate.

The purpose of this study is to experimentally determine whether mechanical properties of concrete can be improved by using olive pomace aggregates (OPA) as a substitute for natural sand. Two types of OPA were tested by replacing an equivalent amount of natural sand. The first type was OPA mixed with olive mill wastewater (OMW), and the second type was OPA not mixed with OMW. For each type, two series of concrete were produced using OPA in both dry and saturated states. The percentage of partial substitution of natural sand by OPA varied from 0% to 15%.

The addition of OPA leads to a reduction in the dry density of hardened concrete, causing a 5.69% decrease in density when compared to the reference concrete. After 28 days, ultrasonic pulse velocity tests indicated that the resulting material is of good quality, with a velocity of 4.45 km/s. To understand the mechanism of resistance development, microstructural analysis was conducted to observe the arrangement of OPA and calcium silicate hydrates within the cementitious matrix. The analysis revealed that there is a low level of adhesion between the cement matrix and OPA at interfacial transition zone level, which was subsequently validated by further microstructural analysis.

The laboratory mechanical tests indicated that the OPCD_OPW (5) sample, containing 5% of OPA, in a dry state and mixed with OMW, demonstrated the best mechanical performance compared to the reference concrete. After 28 days of curing, this sample exhibited a compressive strength (R_c) of 25 MPa. Furthermore, it demonstrated a tensile strength of 4.61 MPa and a dynamic modulus of elasticity of 44.39 GPa, with rebound values of 27 MPa. The slump of the specimens ranged from 5 cm to 9 cm, falling within the acceptable range of consistency (Class S2). Based on these findings, the OPCD_OPW (5) formulation is considered optimal for use in concrete production.

This research paper provides a valuable contribution to the management of OPA and OMW (OPA_OMW) generated from the olive processing industry, which is known to have significant negative environmental impacts. The paper presents an intriguing approach to recycling these materials for use in civil engineering applications.

In line with the growing trend of companies focusing on achieving sustainable development goals (SDGs), this research paper aims to propose a classification of values of socially responsible companies aligned with the SDGs that these companies could fulfill.

The authors’ carried out a qualitative semiotic analysis of four companies as part of the corporate environmental communication initiative to focus on the corporate values conveyed in the messages. Using thematic analysis, the authors’ identified the SDGs achieved by their actions. By coding the values and the SDGs, the authors’ performed a top-down hierarchical classification, linking the value system to the SDGs.

This research unveils various relationships between corporate communication values and the practical implementation of specific SDGs. This paper sheds light on the central role of utilitarian values in achieving SDGs 7, 8, 9, 10, 11 and 13 and highlights the importance of existential values in reaching SDGs 8, 9, 10, 12, 11 and 17. Conversely, no utilitarian values contribute to the realization of SDGs 7, 8, 11, 13 and 17, while no existential values enable the achievement of SDGs 7, 12, 13 and 17.

This research makes a valuable contribution to the achievement of the SDGs by adopting a streamlined approach that aligns with specific company values. The classification of values by SDG provides an in-depth understanding of commitments toward these goals and promotes more coherent integration into corporate culture and business practices. This approach ensures that sustainable progress is aligned with the values communicated in their long-term strategy, enabling businesses to effectively address crises.

This chapter examines how the nature of World War I catalyzed significant changes in the laws of war, the Treaty of Versailles, the failed Leipzig Trials, and the multiple treaties enacted in the 1920s, with particular focus on the Geneva Convention of 1929.