Search results

Purpose — This chapter provides an overview of the sampling outcomes of the field surveys. This includes a description of the samples from the VISTA Follow-On survey and the Special survey covering both Metropolitan Melbourne and the Latrobe Regional Samples. Analysis includes an assessment of the coverage of the samples plus a discussion of the rationale and outcomes for improved sample coverage from the Special survey.

Methodology — The methodology adopted concerns the quantitative statistical analysis of survey sample coverage and cross tabulation of these findings from statistics on the population being sampled.

Findings — The Vista Follow-On survey approach was an effective means of targeting households for survey and also reduced the number of questions required. However, the resulting sample had low coverage of extremely disadvantaged groups. An adjustment to the survey quotas and a new recruitment method termed the Special survey were implemented to address this issue. This proved effective in obtaining a more balanced sample.

This paper will detail the development of a multi-objective mathematical programming model for audit sampling of balances for accounts receivable. The nonlinear nature of the model structure will require the use of a nonlinear solution algorithm, such as the GRG or the genetic algorithm embedded in a Solver spreadsheet modeling system, to obtain appropriate results.

In this study, two postprocessing techniques, namely, conventional burnishing (CB) and ultrasonic-assisted burnishing (UAB), were applied to improve the fatigue behavior of 316 L stainless steel fabricated through selective laser melting (SLM). The effects of these processes on surface roughness, porosity, microhardness and fatigue performance were experimentally investigated. The purpose of this study is to evaluate the feasibility and effectiveness of ultrasonic-assisted burnishing as a preferred post-processing technique for enhancing the fatigue performance of additively manufactured components.

All samples were subjected to a sandblasting process. Next, the samples were divided into three distinct groups. The first group (as-Built) did not undergo any additional postprocessing, apart from sandblasting. The second group was treated with CB, while the third group was treated with ultrasonic-assisted burnishing. Finally, all samples were evaluated based on their surface roughness, porosity, microhardness and fatigue performance.

The results revealed that the initial mean surface roughness (Ra) of the as-built sample was 11.438 µm. However, after undergoing CB and UAB treatments, the surface roughness decreased to 1.629 and 0.278 µm, respectively. Notably, the UAB process proved more effective in eliminating near-surface pores and improving the microhardness of the samples compared to the CB process. Furthermore, the fatigue life of the as-built sample, initially at 66,000 cycles, experienced a slight improvement after CB treatment, reaching 347,000 cycles. However, the UAB process significantly enhanced the fatigue life of the samples, extending it to 620,000 cycles.

After reviewing the literature, it can be concluded that UAB will exceed the capabilities of CB in terms of enhancing the surface roughness and, subsequently, the fatigue performance of additive manufactured (AM) metals. However, the actual impact of the UAB process on the fatigue life of AM products has not yet been thoroughly researched. Therefore, in this study, this paper used the burnishing process to enhance the fatigue life of 316 L stainless steel produced through the SLM process.

Sufficient sample data are the necessary condition to ensure high reliability; however, there are relatively poor fatigue test data in the engineering, which affects fatigue life's prediction accuracy. Based on this, this research intends to analyze the fatigue data with small sample characteristics, and then realize the life assessment under different stress levels.

Firstly, the Bootstrap method and the principle of fatigue life percentile consistency are used to realize sample aggregation and information fusion. Secondly, the classical outlier detection algorithm (DBSCAN) is used to check the sample data. Then, based on the stress field intensity method, the influence of the non-uniform stress field near the notch root on the fatigue life is analyzed, and the calculation methods of the fatigue damage zone radius and the weighting function are revised. Finally, combined with Weibull distribution, a framework for assessing multiaxial low-cycle fatigue life has been developed.

The experimental data of Q355(D) material verified the model and compared it with the Yao’s stress field intensity method. The results show that the predictions of the model put forward in this research are all located within the double dispersion zone, with better prediction accuracies than the Yao’s stress field intensity method.

Aiming at the fatigue test data with small sample characteristics, this research has presented a new method of notch fatigue analysis based on the stress field intensity method, which is combined with the Weibull distribution to construct a low-cycle fatigue life analysis framework, to promote the development of multiaxial fatigue from experimental studies to practical engineering applications.

The purpose of this paper is to examine the practicability of the self-designed ambient humidity controllable pin-disc/rolling multifunctional friction and wear test device and to evaluate the friction and wear characteristics of materials under diverse ambient humidity conditions in different contact forms.

The practicability of the self-designed multifunctional friction tester was examined by the friction and wear tests of materials under different ambient humidity conditions [65%RH, 98%RH (relative humidity)] in diverse contact forms (pin/disc and rolling). Meanwhile, the friction and wear properties of pin/disc samples also rolling samples were assessed from three aspects: average friction coefficient, wear mass and wear morphology.

The results prove that the self-designed multifunctional friction tester has practicability. Therefore, it can be used to simulate the friction and wear tests of materials under diverse ambient humidity conditions in different contact forms. Besides, it is evident that the wear damage of pin/disc and rolling samples are greatly improved under high ambient humidity conditions. And when other conditions are identical, the higher the ambient humidity, the smaller the average friction coefficient, wear mass and wear damage degree of pin/disc also rolling samples.

This paper offers a self-designed multifunctional friction and wear test device. And the tester not only can realize the control of test ambient humidity, but also achieve the wear test of pin/disc or rolling contact forms. The design and production of the tester can offer convenience for the research of tribology, and provide fundamental guidance for the study of materials under high humidity condition in diverse contact forms.

This study aims to find out how pomposia fruit powder (Syzygium cumini L.) mixed with roasted coffee (RCO) affected antioxidants, phytochemicals, lipid peroxidation inhibition and sensory attributes.

Pomposia fruits (Syzygium cumini L.) powder (PFP) was integrated with RCO at levels of 0.0%, 5.0%, 10.0%, 15.0% and 20.0%. RCO, PFP and binary mixtures containing RCO: PFP were evaluated for their total phenolics (TP), total flavonoids (TF), anthocyanin content (AC), antioxidant activity and phenolic compounds fractionation. The oxidative indices of coffee oil samples were measured throughout different storage intervals. Additionally, sensory characteristics of RCO enriched with different PFP doses were evaluated.

PFP samples exhibited the greatest TP content (1910 mg/100 g), whereas RCO samples had the lowest concentration (1090 mg/100 g). As more PFP was added, the corresponding coffee blends’ concentrations of TP, TF and AC were improved significantly. PFP possesses a radical-scavenging activity that is about 1.20 times more than RCO’s. DPPH (2,2-diphenyl-1-picrylhydrazyl) radical-scavenging activity jumped significantly from 74.13% in control (untreated) samples to 77.64%, 78.39% and 80.15% for samples enriched with 10.0%, 15.0% and 20% PFP, respectively. Significant increases in gallic acid, hesperidine, benzoic acid, chlorogenic acid, hispertin, catechol, quercetin, pyrogallol and rutin were detected when RCO was mixed with different quantities of PFP. At the end of storage trial, the coffee oil treated with 20% PFP had AV, PV and TBA values that were about 1.70, 1.95 and 1.66 times lower, respectively, than those of the control sample that had not had PFP addition. The RCO with 5.0% PFP achieved the greatest over acceptability grades.

To the best of the authors’ knowledge, this study was the first study to evaluate the effect of incorporating various level of pomposia fruit powder into RCO. The findings shows that adding different concentrations of pomposia fruit powder into RCO can indeed enhance the radical-scavenging activity of the coffee and potentially extend its shelf life.

This study aims to investigate the combined impact of pharmaceutical marketing strategies, specifically free drug samples and interactions with medical representatives, on physicians’ attitudes and prescribing behavior in Jammu and Kashmir, India.

To achieve this objective, data were collected from a sample comprising 425 physicians. A six-point forced-choice Likert scale was used for data collection, and cluster sampling techniques were used in the study design.

The study reveals significant insights into pharmaceutical marketing’s influence on physician behavior. Free drug samples exert a positive influence on both physician attitudes and prescribing behavior. Physicians’ attitudes, in turn, significantly affect their prescribing decisions. Mediation analysis demonstrates that free drug samples indirectly influence prescribing behavior through shifts in physician attitudes. Effective medical representatives amplify this influence, as stronger associations between free drug samples and physician attitudes are observed when representatives are more effective.

This research contributes by unraveling the intricate dynamics between marketing strategies, physician attitudes and prescribing behavior in Jammu and Kashmir, India. It underscores the importance of ethical pharmaceutical marketing practices, highlighting the substantial role of free drug samples and the crucial function of effective medical representatives in shaping physician behavior. Ultimately, this study sheds light on how responsible pharmaceutical marketing and adept medical representatives can improve health-care outcomes in the region.

In the field of research on the application of digital printing to textile materials, there are still many research issues that arise from the very demanding interaction of digital printing technology and the complex, heterogeneous surface system of textile materials. This is precisely why the area of pre-treatment of textile materials is in need of research, and the purpose of this research was to establish the level of influence of physical and chemical activation of the textile surface with plasma and the possibility of improving the quality of the print and colour reproduction.

The paper deals with the possibility of applying argon and oxygen cold low-pressure plasma in the processing of cellulose knitted fabrics, with the aim of improving the quality of the print and colour reproduction in digital pigment inkjet printing. The selected raw material samples were 100% raw cotton and lyocell. After plasma treatment, the samples were printed by digital ink jet printing with water-based pigment printing ink. An analysis of the micromorphological structure of untreated and plasma-treated samples before and after printing was carried out, and a comparative analysis of the colour of the printed elements was carried out depending on the pre-treatment.

The conducted research showed a positive influence of plasma pre-treatment on the coverage of the fibre surface with pigments, the uniformity of pigment distribution along the fibre surface and the uniformity of the distribution of the polymeric binder layer. This has a positive effect on colour reproduction. Also, certain improvements in colourfastness to washing were obtained.

Considering the complexity of the topic, although exhaustive, this research is not sufficient in itself, but opens up new questions and gives ideas for further research that must be carried out in this area.

Also, this kind of research contributes to the possibility of adopting the idea of industrial plasma transformation, as an ecologically sustainable functionalisation of textiles, which has not yet been established.

This research is certainly a contribution to the establishment of acceptable textile pre-treatment methods in the field of digital printing, as one of the key quality factors in digital textile printing (DTP). Considering the still large number of obstacles and unanswered questions encountered in the field of digital printing on textiles, this kind of research is a strong contribution to the understanding of the fundamental mechanisms of the complex interaction between printing ink and textile.

Goat milk yoghurt differs from cow milk yoghurt in that it has a different casein composition and content, which presents several technical challenges, including consistency with an appropriate flavor.

In this study, the antioxidant potential and phytochemical profiling of the fruits (pineapple and papaya) and vegetable (carrot) extracts was evaluated and the effect of their purees on the quality and stability of stirred goat milk yoghurt (GMY) were investigated. The qualities of stirred GMY with carrot (CrY), pineapple (PaY) and papaya (PpY) purees were assessed against the product without puree (CY).

The carrot puree had the highest moisture, ash contents and pH value. The carrot extract had the highest DPPH radical scavenging activity, while the pineapple extract had the highest total phenolic value (1.59 µg GAE/g) and flavonoids content (0.203 µg CE/g). The scanning of all the puree extracts in GC-MS indicated that 5-hydroxymethylfurfural was a major component. The phytochemical quantification of the extracts through multiple reaction monitoring (MRM) against 16 compounds showed the presence of sinapic acid, cinnamic acid, pthalic acid, ferulic acid, 4-OH-benzoic acid, 3-OH-benzoic acid, p-coumaric acid, caffeic acid and vanillic acid in different quantities. The addition of purees and storage period had a significant (p < 0.05) effect on the moisture, pH, titratable acidity, syneresis, viscosity, color values and sensory properties of the products. In all the samples after 15 days of storage, Streptococcus thermophilus and Lactobacillus bulgaricus counts remained above the recommended level of 106CFU/g. Stirred GMY sample produced with pineapple puree showed a higher syneresis and viscosity, but the CrY sample demonstrated the highest antioxidant activity. The developed formulations remained stable with minimum changes in quality and sensory attribute during refrigerated storage for 10 days.

This study suggests that addition of fruit and vegetable improve the viscosity and sensory perception of the product with minimal use of synthetic flavor and preservatives.