Search results

This study examines how different stacking sequences of bamboo and flax fibers, treated with 5% aqueous sodium hydroxide (NaOH) and filled with 6wt% titanium oxide (TiO₂), affect the physical, mechanical and dry sliding wear resistance properties of a hybrid composite.

Composites with different fiber stacking arrangements were developed and tested per American Society for Testing and Materials (ASTM) standards to evaluate physical, mechanical and wear resistance properties, focusing on the impact of flax fiber mats at intermediate and outer layers.

The hybrid composite significantly outperformed composites reinforced solely with bamboo fibers, showing a 65.95% increase in tensile strength, a 53.29% boost in flexural strength and a 91.01% improvement in impact strength. The configuration with multiple layers of flax fiber mat at intermediate and outer levels also demonstrated superior wear resistance.

This study highlights the critical role of stacking order in optimizing the mechanical properties and wear resistance of hybrid composites. The findings provide valuable insights for the design and application of advanced composite materials, particularly in industries requiring high performance and durability.

The purpose of this paper is to evaluate the effect of titanium oxide (TiO₂) and yttrium oxide (Y₂O₃) nanoparticles-reinforced pure aluminium (Al) on the mechanical properties of hybrid aluminium matrix nanocomposites (HAMNCs).

The HAMNCs were fabricated via a vacuum die-assisted stir casting route by a two-step feeding method. The varying weight percentages of TiO₂ and Y₂O₃ nanoparticles were added as 2.5, 5, 7.5 and 10 Wt.%.

Scanning electron microscope images showed the homogenous dispersion of nanoparticles in Al matrix. The tensile strength by 28.97%, yield strength by 50.60%, compression strength by 104.6% and micro-hardness by 50.90% were improved in HAMNC1 when compared to the base matrix. The highest values impact strength of 36.3 J was observed for HAMNC1. The elongation % was decreased by increasing the weight percentage of the nanoparticles. HAMNC1 improved the wear resistance by 23.68%, while increasing the coefficient of friction by 14.18%. Field emission scanning electron microscope analysis of the fractured surfaces of tensile samples revealed microcracks and the debonding of nanoparticles.

The combined effect of TiO₂ and Y₂O₃ nanoparticles with pure Al on mechanical properties has been studied. The composites were fabricated with two-step feeding vacuum-assisted stir casting.

Finite element (FE) analysis can be used for both design and verification of components. In the case of 3D-printed materials, a proper characterization of properties, accounting for anisotropy and raster angles, can help develop efficient material models. This study aims to use compression tests to characterize short carbon-reinforced PA12 made by fused filament fabrication (FFF) and to model its behaviour by the FE method.

In this work, the authors focus on compression tests, using post-processed specimens to overcome external defects introduced by the FFF process. The material’s elastoplastic mechanical behaviour is modelled by an elastic stiffness matrix, Hill’s anisotropic yield criterion and Voce’s isotropic hardening law, considering the stacking sequence of raster angles. A FE analysis is conducted to reproduce the material’s compressive behaviour through the LS-DYNA software.

The proposed model can capture stress values at different deformation levels and peculiar aspects of deformed shapes until the onset of damage mechanisms. Deformation and damage mechanisms are strictly correlated to orientation and raster angle.

The paper aims to contribute to the understanding of 3D-printed material’s behaviour through compression tests on bulk 3D-printed material. The methodology proposed, enriched with an anisotropic damage criterion, could be effectively used for design and verification purposes in the field of 3D-printed components through FE analysis.

The purpose of this paper is to investigate the friction and wear mechanisms in lubricated sliding conditions of additively manufactured SS316L parts. The different viscous oils 5W30, 15W40, 20W50 and SAE140 are used. These investigations provide a theoretical basis for the high performance of printed and postheattreated SS316L.

Tribological tests were carried out on selective laser melting-made SS316L printed specimens and heat-treated specimens. The parameters in 15 min of test duration are 20 N of load, 200 rpm, 8 mm of pin diameter, 25 mm length, 80 mm of track diameter and EN31 counter disc body. This work presented the phenomena of lubrication regimes and their characterization, as identified by the Stribeck curve, and these regimes affect the tribological properties of additively manufactured SS316L under the influence of industrial viscous lubricants. The results are observed using Scanning electron microscope (SEM), X-ray diffraction (XRD) and wear tests.

The observations indicate that additively manufactured SS316L shows a reduced coefficient of friction (COF) and specific wear rate (SWR). This is credited to the utilization of different viscous lubricants.

This exclusive research demonstrates how various viscous lubricants affect the COF and SWR of printed and post-heat-treated SS316L parts. Lambda (λ), lubricant film thickness (h₀), surface roughness and wear mechanisms are studied and reported.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2024-0110/

Stitching is the traditional method of creating seams using needles and threads. However, this is not useful for waterproof breathable garments as needle holes allow water to penetrate inside the garment, compromising its functionality. This study aims to investigate different techniques for covering the needle holes formed during stitching to achieve a seam that is waterproof, durable and functionally effective.

This study investigates different methods to cover needle holes formed during stitching with the help of seam tape, seam grip adhesive and fuser thread. The emphasis is on evaluating the seam characteristics, including seam strength, seam efficiency, puckering, bending stiffness and resistance to water penetration. Statistical analysis involves the use of the Shapiro–Wilk test, Levene statistic, one-way ANOVA and Tukey’s HSD and Tamhane post-hoc tests.

The experimental results suggest that seam tape is effective in enhancing water resistance, seam strength and seam efficiency, but it contributes to stiffness and aesthetically degrades seams due to increased puckering. Meanwhile, the use of fuser thread presents an alternative, exhibiting improved waterproof properties compared to regular stitching. It offers more flexibility and less puckering compared to seam tape.

This study contributes novel insights by shifting the focus from alternative seaming methods such as bonding and welding, to enhancing traditional stitching for waterproof seam construction. While prior research primarily explored alternatives to stitching, this study uniquely addresses the effectiveness of different techniques in covering needle holes to achieve waterproof seams. The findings provide valuable information for enhancing the functionality of stitched seams in the production of waterproof breathable garments.

This paper aims to report the effect of titanium oxide (TiO₂) particles on the specific wear rate (SWR) of alkaline treated bamboo and flax fiber-reinforced composites (FRCs) under dry sliding condition by using a robust statistical method.

In this research, the epoxy/bamboo and epoxy/flax composites filled with 0–8 Wt.% TiO₂ particles have been fabricated using simple hand layup techniques, and wear testing of the composite was done in accordance with the ASTM G99-05 standard. The Taguchi design of experiments (DOE) was used to conduct a statistical analysis of experimental wear results. An analysis of variance (ANOVA) was conducted to identify significant control factors affecting SWR under dry sliding conditions. Taguchi prediction model is also developed to verify the correlation between the test parameters and performance output.

The research study reveals that TiO₂ filler particles in the epoxy/bamboo and epoxy/flax composite will improve the tribological properties of the developed composites. Statistical analysis of SWR concludes that normal load is the most influencing factor, followed by sliding distance, Wt.% TiO2 filler and sliding velocity. ANOVA concludes that normal load has the maximum effect of 31.92% and 35.77% and Wt.% of TiO2 filler has the effect of 17.33% and 16.98%, respectively, on the SWR of bamboo and flax FRCs. A fairly good agreement between the Taguchi predictive model and experimental results is obtained.

This research paper attempts to include both TiO₂ filler and bamboo/flax fibers to develop a novel hybrid composite material. TiO₂ micro and nanoparticles are promising filler materials, it helps to enhance the mechanical and tribological properties of the epoxy composites. Taguchi DOE and ANOVA used for statistical analysis serve as guidelines for academicians and practitioners on how to best optimize the control variable with particular reference to natural FRCs.

To improve the corrosion resistance of magnesium alloys, the construction of protective coatings is necessary to extend the service life of Mg-based materials.

SiO₂ nanoparticles modified by dodecyltrimethoxysilane (DTMS) were added to the PP and a superhydrophobic Mg(OH)₂/PP-60mSiO₂ composite coating was fabricated on the surface of AZ31 magnesium alloy via the hydrothermal method and subsequently the immersion treatment.

Hydrophilic SiO₂ nanoparticles become hydrophobic after modified by DTMS, showing a higher dispersibility in xylene. By incorporating modified SiO₂ nanoparticles into the composite PP coating, the hydrophobicity of the layer was enhanced, resulting in a contact angle of 166.3° and a sliding angle of 3.4°. It also improved the water repellency and durability of the coating. Furthermore, the intermediate layer of Mg(OH)₂ significantly strengthened the bond between the PP layer and the substrate. The Mg(OH)₂/PP-60mSiO₂ composite coating significantly enhances the corrosion resistance of the magnesium alloy by effectively blocking the infiltration of the corrosion anions during corrosion. The corrosion current density of the Mg(OH)₂/PP-60mSiO₂ composite coating is approximately 8.23 × 10^–9 A·cm^-2, which can achieve a magnitude three times lower than its substrate, making it a promising surface modification for the Mg alloy.

The composite coating effectively and durably enhances the corrosion resistance of magnesium alloys.

Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.

PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.

PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.

The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.

The incorporation of phosphide additives is regarded as a highly effective strategy for enhancing the lubricative qualities of base oils. This study aims to assess the lubrication behavior and efficacy of various phosphide additives in polyethylsiloxane (PES) through the employment of the Schwingum Reibung Verschleiss test methodology, across a temperature range from ambient to 300°C.

PES demonstrated commendable lubrication capabilities within the Si3N4/M50 system, primarily attributable to the Si-O frictional reaction film at the interface. This film undergoes disintegration as the temperature escalates, leading to heightened wear. Moreover, the phosphide additives were found to ameliorate the issues encountered by PES in the Si3N4/M50 system, characterized by numerous boundary lubrication failure instances. A chemical film comprising P-Fe-O was observed to form at the interface; however, at elevated temperatures, disintegration of some phosphide films precipitated lubrication failures, as evidenced by a precipitous rise in the coefficient of friction.

The results show that a phosphide reactive film can be formed and a reduction in wear rate is achieved, which is reduced by 64.7% from 2.98 (for pure PES at 300°C) to 1.05 × 10^–9 μm³/N m (for triphenyl phosphite at 300°C).

The data derived from this investigation offer critical insights for the selection and deployment of phosphide additives within high-temperature lubrication environments pertinent to PES.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2024-0139/

The study directs attention to the psychological conditions experienced and knowledge management practices leveraged by faculty in higher education institutes (HEIs) to cope with the shift to emergency remote teaching caused by the COVID-19 pandemic. By focusing attention on faculty experiences during this transition, this study aims to examine an under-investigated effect of the pandemic in the Indian context.

Interpretative phenomenological analysis is used to analyze the data gathered in two waves through 40 in-depth interviews with 20 faculty members based in India over a year. The data were analyzed deductively using Kahn’s framework of engagement and robust coding protocols.

Eight subthemes across three psychological conditions (meaningfulness, availability and safety) were developed to discourse faculty experiences and challenges with emergency remote teaching related to their learning, identity, leveraged resources and support received from their employing educational institutes. The findings also present the coping strategies and knowledge management-related practices that the faculty used to adjust to each discussed challenge.

The study uses a longitudinal design and phenomenology as the analytical method, which offers a significant methodological contribution to the extant literature. Further, the study’s use of Kahn’s model to examine the faculty members’ transitions to emergency remote teaching in India offers novel insights into the COVID-19 pandemic’s effect on educational institutes in an under-investigated context.