Search results

Currently on additive manufacturing, extensive research is directed toward mitigating the main challenges associated with multi-material in fused filament fabrication which has a weak bonding strength between dissimilar materials. Low interfacial bonding strength leads to defects, anisotropy and temperature gradient in materials which negatively impact the mechanical performance of the multi-material prints. The purpose of this study was to assess the performance of different interface geometry designs in terms of the mechanical properties of the specimens.

Tensile test specimens were printed using: mono-material without a boundary interface, mono-material with the interface geometries (Face-to-face; U-shape; T-shape; Dovetail; Encapsulation; Mechanical interlocking; and Overlap) and multi-material with the interface geometries. The materials chosen with high and low compatibility were Tough polylactic acid (PLA) and TPU.

The main results of this study indicate that the interface geometries with the mechanical constriction between materials provide better structural integrity to the specimens. Moreover, in the case of the mono-material parts, the most effective interface design was the mechanical interlocking for both Tough PLA and TPU. On the other hand, in the case of multi-material specimens, the encapsulation showed the highest ultimate tensile strength, whereas the overlap and T-shape presented more robust bonding.

This study examines the mechanical performance, particularly tensile strength, strain at break, Young’s modulus and yield strength of different interface designs which were not studied in the previous studies.

Particles bed binding by selective cement activation (SCA) method is a computer-aided manufacturing (CAM) technique used to produce cementitious elements. A computer-aided design file is sliced to generate G-codes before printing. This paper aims to study the effect of key input parameters for slicer software on the final properties of printed products.

The one factor at a time (OFAT) methodology is used to investigate the impact of selected parameters on the final properties of printed specimens, and the causes for the variations in outcomes of each variable are discussed.

Finer aggregates can generate a more compact layer, resulting in a denser product with higher strength. Fluid pressure is directly determined by voxel rate (r_V); however, high pressures enable better fluid penetration control for fortified products; for extreme r_Vs, residual voids in the interfaces between successive layers and single-line primitives impair mechanical strength. It was understood that printhead movement along the orientation of the parts in the powder bed improved the mechanical properties.

The design of experiment (DOE) method assesses the influence of process parameters on various input printing variables at the same time. As the resources are limited, a fractional factorial plan is carried out on a subset of a full factorial design; hence, providing physical interpretation behind changes in each factor is difficult. OFAT aids in analyzing the effect of a change in one factor on output while all other parameters are kept constant. The results assist engineers in properly considering the influence of variable variations for future DOE designs.

The tourism industry is facing significant challenges in an ever-changing world marked by globalisation, digitalisation and societal shifts. The issues of overtourism and massification exacerbate concerns about sustainability and the industry's impact on the environment and local communities. These concerns arise as profit-driven ideologies overshadow the industry's original vocation to contribute to meaningful encounters, well-being and social justice. This chapter explores the cultivation of humaneness and conscience within tourism through education, knowledge and personal reflection. Drawing inspiration from Hannah Arendt's interpretation of Socrates' philosophy, it highlights the importance of critical thinking and a comprehensive understanding of the industry's role in shaping alternative futures. Tourism higher education plays a pivotal role in empowering students to become catalysts for systemic transformation. Furthermore, this chapter emphasises the value of embracing diverse viewpoints and engaging in meaningful encounters and dialogues with local communities and stakeholders to collaboratively imagine and implement sustainable practices. Only by dismantling entrenched habits through critical thinking and fostering collaboration can the tourism industry envision alternative trajectories towards a more conscientious and humane path forward.

This study aims to facilitate access to vascular disease screening for low-income individuals living in remote and conflict areas based on the results of a pilot trial in Colombia. Also, to increase the amount of diagnosis training of vascular surgery (VS) in civilians.

The operation method includes five stages: strategy development and adjustment; translation of the strategy into a real-world setting; operation logistics planning; strategy analysis and adoption. The operation plan worked efficiently in this study’s sample. It demonstrated high sensibility, efficiency and safety in a real-world setting.

The authors developed and implemented a flow model operating plan for screening vascular pathologies in low-income patients pro bono without proper access to vascular health care. A total of 140 patients from rural areas in Colombia were recruited to a controlled screening session where they underwent serial noninvasive ultrasound assessments conducted by health professionals of different training stages in VS.

The plan was designed to be implemented in remote, conflict areas with limited access to VS care. Vascular injuries are critically important and common among civilians and military forces in regions with active armed conflicts. As this strategy can be modified and adapted to different medical specialties and geographic areas, the authors recommend checking the related legislation and legal aspects of the intended areas where we will implement this tool.

Different sub-specialties can implement the described method to be translated into significant areas of medicine, as the authors can adjust the deployment and execution for the assessment in peripheral areas, conflict zones and other public health crises that require a faster response. This is necessary, as the amount of training to which VS trainees are exposed is low. A simulated exercise offers a novel opportunity to enhance their current diagnostic skills using ultrasound in a controlled environment.

Evaluating and assessing patients with limited access to vascular medicine and other specialties can decrease the burden of vascular disease and related complications and increase the number of treatments available for remote communities.

It is essential to assess the most significant number of patients and treat them according to their triage designation. This management is similar to assessment in remote areas without access to a proper VS consult. The authors were able to determine, classify and redirect to therapeutic interventions the patients with positive findings in remote areas with a fast deployment methodology in VS.

Access to health care is limited due to multiple barriers and the assessment and response, especially in peripheral areas that require a highly skilled team of medical professionals and related equipment. The authors tested a novel mobile assessment tool for remote and conflict areas in a rural zone of Colombia.

Left atrial appendage occlusion (LAAO) is a structural interventional cardiology procedure that offers several possibilities for the application of additive manufacturing technologies. The literature shows a growing interest in the use of 3D-printed models for LAAO procedure planning and occlusion device choice. This study aims to describe a full workflow to create a 3D-printed LAA model for LAAO procedure planning.

The workflow starts with the patient’s computed tomography diagnostic image selection. Segmentation in a commercial software provides initial geometrical models in standard tessellation language (STL) format that are then preprocessed for print in dedicated software. Models are printed using a commercial stereolithography machine and postprocessing is performed.

Models produced with the described workflow have been used at the Careggi Hospital of Florence as LAAO auxiliary planning tool in 10 cases of interest, demonstrating a good correlation with state-of-the-art software for device selection and improving the surgeon’s understanding of patient anatomy and device positioning.

3D-printed models for the LAAO planning are already described in the literature. The novelty of the article lies in the detailed description of a robust workflow for the creation of these models. The robustness of the method is demonstrated by the coherent results obtained for the 10 different cases studied.

This article explores the concept of “heritage futures”, the role of heritage in managing relations between present and future societies. It assesses how thinking strategically about the future changes, complicates and contextualises practices of heritage. What might an attention to the future bring to work in heritage, and simultaneously, what challenges—both practical and ethical—arise?

This article takes the form of a conversation about the nature of heritage futures and how such a project may be implemented in both heritage practice and field research in heritage studies. The two authors are heritage scholars who integrate heritage futures questions into their research in different ways, and their conversation uncovers potentialities and difficulties in the heritage futures project.

The discussion covers the particular ethical issues that arise when the dimension of time is added to heritage research and practice, including questions of continuism, presentism and specificity. The conversation argues for the importance of considering the future in heritage studies and heritage practice and that this forms a key part of understanding how heritage may be part of building a sustainable present and future.

The future is an under-examined concept within heritage studies, even as heritage is often framed as something to be preserved “for future generations”. But what impact might it have on heritage practice to really consider what this means, beyond the platitude? This article suggests that heritage scholars and practitioners direct their attention to this often-neglected facet of heritage.

This paper aims to reduce waste management and generate wealth by investigating the novelty of combining chicken feather fiber and bamboo particles to produce hybrid biocomposites. This is part of responsible production and sustainability techniques for sustainable development goals. This study aims to broaden animal and plant fiber utilization in the sustainable production of epoxy resins for engineering applications.

This research used two reinforcing materials [chicken feather fiber (CFF) and bamboo particles (BP)] to reinforce epoxy resin. The BPs were kept constant at 6 Wt.%, while the CFF was varied within 3–15 Wt.% in the composites to make CFF-BP polymer-reinforced composite (CFF-BP PRC). The mechanical experiment showed a 21% reduction in densities, making the CFF-BP PRC an excellent choice for lightweight applications.

It was discovered that fabricated composites with 10 mm CFF length had improved properties compared with the 15 mm CFF length and pristine samples, which confirmed that short fibers are better at enhancing randomly dispersed fibers in the epoxy matrix. However, the ballistic properties of both samples matched. There is a 40% increase in tensile strength and a 54% increase in flexural strength of the CFF-BP PRC compared to the pristine sample.

According to the literature review, to the best of the authors’ knowledge, this is a novel study of chicken fiber and bamboo particles in reinforcing epoxy composite.

Due to the unknown location, size and timing of disasters, the rapid response required by humanitarian operations (HO) faces high uncertainty and limited time to raise funds. These harsh realities make HO challenging. This study aims to systematically capture the complex dynamic relationships between operations in humanitarian settings.

To achieve this goal, the authors undertook a systematic review of the extant academic literature linking HO to system dynamics (SD) simulation.

The research reviews 88 papers to propose a taxonomy of different topics covered in the literature; a framework represented through a causal loop diagram (CLD) to summarise the taxonomy, offering a view of operational activities and their linkages before and after disasters; and a research agenda for future research avenues.

As the authors provide an adequate representation of reality, the findings can help decision makers understand the problems faced in HO and make more effective decisions.

While other reviews on the application of SD in HO have focused on specific subjects, the current research presents a broad view, summarising the main results of a comprehensive CLD.

The involvement of clients in service encounters and service development has become a central principle for contemporary health and social care organizations. However, in day-to-day work settings, the shift toward client involvement is still in progress. We examined how health and social care professionals, together with clients and managers, co-develop their conceptions of client involvement and search for practical ways in which to implement these in organizational service processes.

The empirical case of this study was a developmental intervention, the client involvement workshop, conducted in a Finnish municipal social and welfare center. The cultural-historical activity theory (CHAT) framework was used to analyze the development of client involvement ideas and the modes of interaction during the intervention.

Analysis of the collective discussion revealed that the conceptions of client involvement developed through two interconnected object-orientations: Enabling client involvement in service encounters and promoting client involvement in the service system. The predominant mode of interaction in the collective discussion was that of “coordination.” The clients' perspective and contributions were central aspects in the turning points from coordination to cooperation; professionals crossed organizational boundaries, and together with clients, constructed a new client involvement-based object. This suggests that client participation plays an important role in the development of services.

The CHAT-based examination of the modes of interaction clarifies the potential of co-developing client-involvement-based services and highlights the importance of clients' participation in co-development.

The purpose of this study is to propose an innovative and efficient process in urban policy-making that combines a divergent and creative method with a convergent and strategic one. At the same time, the purpose is also to propose a useful innovation to enforce the usability of both methods. On the one hand, mission-oriented policies run the risk of being overly focused on the present and of not being able to develop preparedness in organization. On the other hand, scenario development has the reverse problem it often does not point out how to use scenario narratives to inform and devise short-term strategic actions.

The paper proposes an innovative methodological approach, the mission-oriented scenarios, which hybridizes Mazzucato's mission-oriented public policy framework with Jim Dator's Manoa school four futures method. The proposed methodological innovation emerges from a urban foresight academic-led project carried out in the context of the Metropolitan City of Turin, Italy, where a first application of the mission-oriented scenarios was tested on six different focal issues (from reindustrialization to cultural policies) and the scenario narratives were used as sources for the grounding of 12 missions and 48 strategic actions towards 2030.

Mission-oriented scenarios can contribute to the generation of more sustainable and inclusive urban public policies. This methodological proposal is based on an original mix of knowledge exchange procedures borrowed from methodological approaches with different backgrounds: the mission-oriented and the archetypal scenarios. Their conjunction could support the formulation of ambitious yet pragmatic policies, giving a plurality of actors the opportunity to act and establish fruitful and lasting partnerships.

The paper reconstructs one of the first urban foresight projects carried out in a major Italian city by two prestigious universities and exposes a methodological innovation resulting from reflection on the strengths and weaknesses of the project, which opens the door to the development of a new scenario technique.