Search results

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

This study aims to introduce the achievements and benefits of applying wheel/rail-force–based maintenance interval extension of the C80 series wagon in China.

Chinese wagons' existing maintenance strategy had left a certain safety margin for the characteristics of widely running range, unstable service environment and submission to transportation organization requirements. To reduce maintenance costs, China railway (CR) has attempted to extend the maintenance interval since 2020. The maintenance cycle of C80 series heavy haul wagons is extended by three months (no stable routing) or 50,000 km (regular routing). However, in the meantime, the alarming rate of the running state, a key index to reflect the severe degree of hunting stability, by the train performance detection system (TPDS) for the C80 series heavy haul wagons has increased significantly.

The present paper addresses a big data statistical way to evaluate the risk of allowing the C80 series heavy haul wagons to remain in operation longer than stipulated by the maintenance interval initial set. Through the maintenance and wayside-detector data, which is divided into three stages, the extension period (three months), the current maintenance period and the previous maintenance period, this method reveals the alarming rate of hunting was correlated with maintenance interval. The maintainability of wagons will be achieved by utilizing wagon performance degradation modeling with the state of the wheelset and the often-contact side bearing. This paper also proposes a statistical model to return to the average safety level of the previous maintenance period's baseline through correct alarming thresholds for unplanned corrective maintenance.

The paper proposes an approach to reduce safety risk due to maintenance interval extension by effective maintenance program. The results are expected to help the railway company make the optimal solution to balance safety and the economy.

This paper aims to answer the questions of what clothing practices related to sustainable fashion can be observed in young consumers' daily lives in Finland’s capital region and what prevents their further proliferation.

This is qualitative research that draws from 22 semi-structured interviews with high school students in the capital area of Finland. The data were analyzed with the use of thematic analysis, a flexible method of data analysis that allows for the extraction of categories from both theoretical concepts and data.

This paper contributes to studies of young people’s consumption with the practice theory approach, putting forward the category of following sustainable fashion as an integrative practice. The three-element model of the practice theory allows answering the question of challenges that prevent the practice from shaping. The paper further advances this approach by identifying a list of context-specific dispersed practices incorporated into sustainable fashion.

The study suggests practical ways of improving clothing consumption based on the practice theory approach and findings from empirical research. Sustainable practices require competences, knowledge and skills that the school, as an institution working closely with high school students, could help develop.

The study contributes to the current studies of sustainability and youth culture of consumption with a practice theory approach and findings, related to a particular context of a country from Northern Europe.

By merging good countryside and rural capitals frameworks, a model for reimagining the island's development is formulated, which is then applied to the female perspective to provide valuable insights from a group that is often marginalized in rural areas. As Croatian islands are highly tourism-oriented, this study finds it important to explore possibilities for future island development that can provide balanced and vibrant settlements on the islands.

The present paper synthesizes Shucksmith's (2018) model of a good countryside, which serves as a goal, with Gkartzios et al.'s (2022) capitals framework, which is viewed as a means of attaining a good countryside, specifically a good island. The research is delimited to the island of Brac, Croatia. By conducting interviews with female respondents, this study aims to capture the female perspective on envisioning potential futures of “good” island living, a perspective that is frequently underestimated despite its significant contributions to the creation of an ideal locale.

The results demonstrate that there is a substantial amount of socio-cultural rural capital that is leveraged to strengthen relatedness and rights as development objectives. However, low levels of economic, built and land-based rural capital pose challenges to achieving repair and re-enchantment, which are crucial for settlements that rely on tourism.

These findings bear immense implications for policymakers and planners, underscoring the imperative to account for the perspectives and needs of diverse social groups, including women, in the design and implementation of development strategies for islands. By doing so, a sustainable and equitable future, rich in tourism potential, can be cultivated on the island.

An unreliable supply of grid electricity has a strong negative impact on industrial and commercial profitability as well as on household activities and government services that rely on electricity supply. This unreliable grid electricity could be a result of technical and security factors affecting the grid network. Therefore, this study aims to investigate the effects of technical and security factors on the transmission and distribution of grid electricity in Uganda.

This study used the ordinary least squares (OLS) and autoregressive distributed lag (ARDL) models to examine the effects of technical and security factors on grid electricity reliability in Uganda. The study draws upon secondary time series monthly data sourced from the Uganda Electricity Transmission Company Limited (UETCL) government utility, which transmits electricity to both distributors and grid users. Additionally, data from Umeme Limited, the largest power distribution utility in Uganda, were incorporated into the analysis.

The findings revealed that technical faults, failed grid equipment, system overload and theft and vandalism affected grid electricity reliability in the transmission and distribution subsystems of the Ugandan power grid network. The effect was computed both in terms of frequency and duration of power outages. For instance, the number of power outages was 116 and 2,307 for transmission and distribution subsystems, respectively. In terms of duration, the power outages reported on average were 1,248 h and 5,826 h, respectively, for transmission and distribution subsystems.

This paper investigates the effects of technical and security factors on the transmission and distribution grid electricity reliability, specifically focusing on frequency and duration of power outages, in the Ugandan context. It combines both OLS and ARDL models for analysis and adopts the systems reliability theory in the area of grid electricity reliability research.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

The purpose of this paper is to summarize the status and characteristics of rail technology of high-speed railway in China, and point out the development direction of rail technology of high-speed railway.

This study reviews the evolution of high-speed rail standards in China, comparing their chemical composition, mechanical attributes and geometric specifications with EN standards. It delves into the status of rail production technology, shifts in key performance indicators and the quality characteristics of rails. The analysis further examines the interplay between wheels and rails, the implementation of grinding technology and the techniques for inspecting rail service conditions. It encapsulates the salient features of rail operation and maintenance within the high-speed railway ecosystem. The paper concludes with an insightful prognosis of high-speed railway technology development in China.

The rail standards of high-speed railway in China are scientific and advanced, highly operational and in line with international standards. The quality and performance of rail in China have reached the world’s advanced level. The 60N profile guarantees the operation quality of wheel–rail interaction effectively. The rail grinding technology system scientifically guarantees the long-term good service performance of the rail. The rail service state detection technology is scientific and efficient. The rail technology will take “more intelligent” and “higher speed” as the development direction to meet the future needs of high-speed railway in China.

The development direction of rail technology for high-speed railway in China is defined, which will promote the continuous innovation and breakthrough of rail technology.

This paper studies the interactive valuation discourses of an online user community (transfermarkt.de) that seeks to determine market values for soccer players. Despite their seemingly casual nature, these values have featured in newspapers, transfer negotiations, academic research, and capital market communication – and have thus become reified.

The paper employs netnographic research methodology to collect and thematically analyze a wide range of user entries on the platform. These entries are studied using theoretical insights from the sociology of quantification and valuation.

The analysis reveals how values are constructed in constant interaction between value-proposing users and value-justifying “experts.” This dynamic form of relational valuation positions players relative to one another as well as to actual transactions on the transfer market. In the absence of authoritative guidelines, it is this possibility and affordance for interaction that enacts a coherent valuation regime. The paper further reveals the platform's response to a disruptive event, which risked bringing the user-expert dynamics to a halt, requiring intervention from the platform to repair its valuation frame.

The paper responds to increased scholarly interests in the valuation of professional athletes. It contributes to the extant literature on valuation, first, by analyzing the dynamic valuation work that feeds into the social construction of values and, second, by studying platform participation and user interaction in a socially engineered online space.

This paper aims to propose a simulation-based performance evaluation model for the drone-based delivery of aid items to disaster-affected areas. The objective of the model is to perform analytical studies, evaluate the performance of drone delivery systems for humanitarian logistics and can support the decision-making on the operational design of the system – on where to locate drone take-off points and on assignment and scheduling of delivery tasks to drones.

This simulation model captures the dynamics and variabilities of the drone-based delivery system, including demand rates, location of demand points, time-dependent parameters and possible failures of drones’ operations. An optimization model integrated with the simulation system can update the optimality of drones’ schedules and delivery assignments.

An extensive set of experiments was performed to evaluate alternative strategies to demonstrate the effectiveness for the proposed optimization/simulation system. In the first set of experiments, the authors use the simulation-based evaluation tool for a case study for Central Florida. The goal of this set of experiments is to show how the proposed system can be used for decision-making and decision-support. The second set of experiments presents a series of numerical studies for a set of randomly generated instances.

The goal is to develop a simulation system that can allow one to evaluate performance of drone-based delivery systems, accounting for the uncertainties through simulations of real-life drone delivery flights. The proposed simulation model captures the variations in different system parameters, including interval of updating the system after receiving new information, demand parameters: the demand rate and their spatial distribution (i.e. their locations), service time parameters: travel times, setup and loading times, payload drop-off times and repair times and drone energy level: battery’s energy is impacted and requires battery change/recharging while flying.

Climate change is occurring around us and impacting on our daily lives, meaning that we have to deal with our cities in a different way. There is also increasing awareness of the need for daily contact with green spaces and the natural environment in order to live a happy, productive and meaningful life.

This reflective essay tells the narrative of how urbanisation has been disconnecting humans from nature. Non-sustainable, non-resilient patterns of urbanisation, along with the neglect of inner-city areas, have resulted in fragmentation and urban decline, led to a loss of biodiversity, and caused the deterioration of ecosystems and their services. Urban regeneration projects allow us to “repair” and restore some of this damage whilst enhancing urban resilience. Connecting existing and enhanced ecosystems, and re-establishing ecosystems both within cities and at the peri-urban fringe is vital for strengthening ecosystem resilience and building adaptive capacity for coping with the effects of climate change.

Cities worldwide need to look for suitable solutions to increase the resilience of their urban spaces in the face of climate change. This essay explores how this can be achieved through the integration of nature-based solutions, the re-greening of neighbourhoods and by correctly attributing value to natural capital. Transforming existing cities and neighbourhoods in this way will enable ecosystems to contribute their services towards healthier and more liveable cities.