Search results

Discusses the 27 papers in ISEF 1999 Proceedings on the subject of electromagnetisms. States the groups of papers cover such subjects within the discipline as: induction machines; reluctance motors; PM motors; transformers and reactors; and special problems and applications. Debates all of these in great detail and itemizes each with greater in‐depth discussion of the various technical applications and areas. Concludes that the recommendations made should be adhered to.

The purpose of this paper is to deal with the investigation of no-load operation of tubular linear permanent magnet synchronous machines (T-LPMSMs). It is aimed at the prediction of the phase flux linkages, the back-EMF and the cogging force using a position varying magnetic equivalent circuit (MEC).

This study is based on the elaboration and the resolution of the position varying MEC, and the utilization of its results for the prediction of the phase flux linkages, the back-EMF and the cogging force, considering a general topology of T-LPMSMs. Then, a case study is treated with a position varying MEC-based investigation of its no-load features. These are validated by a 2-D finite element analysis (FEA).

It has been found that the developed position varying MEC can be regarded as an accurate tool that requires a low CPU-time.

Beyond the FEA validation, this work should be extended to an experimental one. Moreover, the position varying MEC validity should be extended to load operation in order to enable the prediction of the force production capability.

The developed position varying MEC could be suitably used for the pre-design of T-LPMSMs. These are currently given an increasing attention in many applications, such as wave energy conversion and free-piston engines.

The paper proposes a position varying MEC for the prediction of the features of T-LPMSMs.

Gives introductory remarks about chapter 1 of this group of 31 papers, from ISEF 1999 Proceedings, in the methodologies for field analysis, in the electromagnetic community. Observes that computer package implementation theory contributes to clarification. Discusses the areas covered by some of the papers ‐ such as artificial intelligence using fuzzy logic. Includes applications such as permanent magnets and looks at eddy current problems. States the finite element method is currently the most popular method used for field computation. Closes by pointing out the amalgam of topics.

The purpose of this paper is to propose a method to estimate the magnetic saturation and end effect of linear switched reluctance machines (LSRMs) with fully pitched winding configuration used in the wave energy conversion.

The magnetic saturation and strong coupling make it very difficult to derive a comprehensive mathematical model for the behavior of the LSRMs. Meanwhile, the various end effects could not be comprehensively considered in the two‐dimensional model which is widely studied. Therefore, the magnetic equivalent circuit model including the three‐dimensional (3‐D) effects is presented in this paper and 3‐D finite element analysis (FEA) is used to validate the mathematical model.

The results from 3‐D FEA are in good agreement with the numerical simulation, which validates the accuracy of the magnetic equivalent circuit modeling method.

This technique helps one to know the influence exerted by the magnet saturation and end effect of LSRMs and provides a powerful computer‐aided analysis tool. Meanwhile, this modeling method supplies accurate values for the following study of reliable control algorithm.

The paper presents a magnetic equivalent method to estimate the magnetic saturation and end effect of LSRMs with fully pitched winding configuration used in the wave energy conversion.

Introduces the fourth and final chapter of the ISEF 1999 Proceedings by stating electric and magnetic fields are influenced, in a reciprocal way, by thermal and mechanical fields. Looks at the coupling of fields in a device or a system as a prescribed effect. Points out that there are 12 contributions included ‐ covering magnetic levitation or induction heating, superconducting devices and possible effects to the human body due to electric impressed fields.

Introduces papers from this area of expertise from the ISEF 1999 Proceedings. States the goal herein is one of identifying devices or systems able to provide prescribed performance. Notes that 18 papers from the Symposium are grouped in the area of automated optimal design. Describes the main challenges that condition computational electromagnetism’s future development. Concludes by itemizing the range of applications from small activators to optimization of induction heating systems in this third chapter.

The purpose of this paper is to create a reliable nonlinear magnetic equivalent circuit (NMEC) of the hybrid magnetic bearing (HMB). Commonly used magnetic equivalent circuits of HMB omit a saturation effect of the magnetic material as well as the leakage and fringing flux. It results in imprecise modelling of the magnetic field distribution. On the other hand, only 3D finite element analysis (FEA) can be used to precisely simulate the magnetic field in this type of the magnetic bearing. The proposed NMEC incorporates the saturation effect of the magnetic material, as well as the leakage and fringing flux.

The magnetic equivalent circuit of presented HMB is proposed to obtain a reliable model that ensures short calculation time. Developed NMEC incorporates the phenomena as the saturation effect, as well as the leakage and fringing flux. The reluctance of the air gap that includes the fringing flux was calculated using 3D FEA. Kirchhoffs’ laws were used to create a set of nonlinear equations that were iteratively solved by Broyden’s method.

Incorporating into NMEC of the HMB a saturation effect of the magnetic material, as well as the leakage and fringing flux, resulted in the accurate model that was in good agreement with 3 D finite element model and the real object. The developed NMEC offers the calculation time in the range of miliseconds, therefore can be successfully used in the engineering design instead of the FEM.

Presented NMEC can be considered as a fundamental model that can be successfully used for accurate and fast simulation of the HMB. Proposed NMEC includes considerable factors that decide about the model accuracy such as the saturation effect of the ferromagnetic material and the leakage and fringing flux. The developed NMEC can be used in the optimization procedures and for simulations of dynamic responses.

This paper aims to study the influence of supply voltage variations on the external magnetic field emitted by grid-powered induction machines (IMs).

Two models are developed in the paper to analyse, for different supply voltage values, the influence of the variations of the magnetizing voltage for which there is a link with the tangential component of the external flux. The first is an analytical model based on the IM single-phase-equivalent circuit with variable magnetizing reactance to take into account the saturation of the magnetic circuit. The second is a numerical finite element simulation to model the same phenomenon. Results of both models are analysed with experimental measures of the external flux.

The study shows that the amplitude of the external field strongly depends on supply voltage values.

The investigation is mainly focused on the tangential component of the external magnetic field which is of high importance concerning the applicability of non-invasive methods of diagnosis, as electromagnetic torque estimation developed by the authors or internal fault determination.

The originality of the paper concerns the characterization of the external flux with the supply voltage for IMs. It is shown that the magnetic circuit radiates external flux differently with the load and with the supply voltage.

The purpose of this study is to propose a modeling method of the equivalent circuit for a new type of high-temperature superconducting partial-core transformer (HTS-PCT) made of ReBCO-coated conductors.

The modeling process is based on the “Steinmetz” equivalent circuit. The impedance components in the circuit are obtained by the calculations of the core losses and AC losses of the HTS windings by using theoretical methods. An iterative computation is also used to decide the equivalent resistances of the AC losses of the primary and secondary HTS windings. The reactance components in the circuit are calculated from the energy stored in the magnetic fields by finite element method. The validation of the modeling method is verified by experimental results

The modeling method of the equivalent circuit of HTS-PCT is valid, and an equivalent circuit for HTS-PCT is presented.

The equivalent circuit of HTS-PCT could be obtained by the suggested modeling method. Then, it is easy to analyze the characteristics of the HTS-PCT by its equivalent circuit. Moreover, the modeling method could also be useful for the design of a specific HTS-PCT.

The study proposes a modeling method of the HTS-PCT made of the second-generation HTS tapes, i.e. ReBCO-coated conductors.

The paper aims to propose a a field-circuit method for investigating the magnetic behavior of a wireless power transfer system (WPTS) for the charge of batteries of electric vehicles. In particular, a 3D model for finite element analysis (FEA) for the field simulation of a WPTS is developed. Specifically, the effects of aluminum shield and steel layer, representing the car frame, on the self and mutual inductances are investigated. An equivalent electric circuit is then built, and the relevant lumped parameters are identified by means of the FEAs.

The finite element model is used to evaluate self and mutual inductances in several transmitting-receiving coil configurations and relative positions. In particular, the FEA simulates the aluminum and steel layers as shell elements in a 3D domain. The self and mutual inductance values in the aligned coil case are also used as input parameters in a circuit model to evaluate the onload current.

The use of shell elements in FEA substantially reduces the number of mesh elements needed to simulate the eddy currents in the steel and aluminum layer, so putting the ground for low-cost field analysis. Moreover, the FEA gives an accurate computation of the self and mutual inductance to be used in a circuit model, which, in turn, provides a fast update of the onload induced current.

To save computational time, the use of 2D shell elements to model thin conductive regions introduces a simplified FEA that could be used in the WPTS simulation. Moreover, the dynamic behavior of WPTS, i.e. the operation when the receiving coil is moving with respect to the transmitting one, is considered. Because of the lumped parameters’ dependence upon the relative positions of the two coils, the proposed method allows identifying the circuit parameters for several configurations so substantially reducing the computational burden.