Search results

To guide the stable radius clearance choice of water-lubricated bearings for single screw compressors, this paper aims to analyze the effects of turbulence and cavitation on bearing performance under two conditions of specified external load and radius clearance.

A modified Reynolds equation considering turbulence and cavitation is adopted, based on the Jakobsson–Floberg–Olsson boundary condition, Ng–Pan model and turbulent factors. The equation is solved using the finite difference method and successive over-relaxation method to investigate the bearing performance.

The turbulent effect can increase the hydrodynamic pressure and cavitation. In addition, the turbulent effect can lead to an increase in the equilibrium radius clearance. The turbulent region exhibits a higher load capacity and cavitation rate. However, the increased cavitation negatively impacts the frictional coefficient and end flow rate. The impact of turbulence increases as the radius clearance decreases. As the rotating speed increases, the turbulence effect has a greater impact on the bearing characteristics.

The research can provide theoretical support for the design of water-lubricated journal bearings used in high-speed water-lubricated single screw compressors.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2024-0029/

This paper aims to investigate the moisture diffusion behavior in a system-in-package module systematically by moisture-thermalmechanical-coupled finite element modeling with different structure parameters under increasingly harsh environment.

A finite element model for a system-in-package module was built with moisture-thermal-mechanical-coupled effects to study the subsequences of hygrothermal conditions.

It was found in this paper that the moisture diffusion path was mainly dominated by hygrothermal conditions, though structure parameters can affect the moisture distribution. At lower temperatures (30°C~85°C), the direction of moisture diffusion was from the periphery to the center of the module, which was commonly found in simulations and literatures. However, at relatively higher temperatures (125°C~220°C), the diffusion was from printed circuit board (PCB) to EMC due to the concentration gradient from PCB to EMC across the EMC/PCB interface. It was also found that there exists a critical thickness for EMC and PCB during the moisture diffusion. When the thickness of EMC or PCB increased to a certain value, the diffusion of moisture reached a stable state, and the concentration on the die surface in the packaging module hardly changed. A quantified correlation between the moisture diffusion coefficient and the critical thickness was then proposed for structure parameter optimization in the design of system-in-package module.

The different moisture diffusion behaviors at low and high temperatures have seldom been reported before. This work can facilitate the understanding of moisture diffusion within a package and offer some methods about minimizing its effect by design optimization.

The occupational health risk associated with the production of prefabricated concrete components is often overlooked. This paper will use a damage assessment and cyclic mitigation (DACM) model to provide individualized exposure risk assessment and corresponding mitigation management measures for workers who are being exposed.

The DACM model is proposed based on the concept of life cycle assessment (LCA). The model uses Monte-Carlo simulation for uncertainty risk assessment, followed by quantitative damage assessment using disability-adjusted life year (DALY). Lastly, sensitivity analysis is used to identify the parameters with the greatest impact on health risks.

The results show that the dust concentration is centered around the mean, and the fitting results are close to normal distribution, so the mean value can be used to carry out the calculation of risk. However, calculations using the DACM model revealed that there are still some work areas at risk. DALY damage is most severe in concrete production area. Meanwhile, the inhalation rate (IR), exposure duration (ED), exposure frequency (EF) and average exposure time (AT) showed greater impacts based on the sensitivity analysis.

Based on the comparison, the DACM model can determine that the potential occupational health risk of prefabricated concrete component (PC) factory and the risk is less than that of on-site construction. It synthesizes field research and simulation to form the entire assessment process into a case-base system with the depth of the cycle, which allows the model to be continuously adjusted to reduce the occupational health damage caused by production pollution exposure.

The purpose of this study is to explore the interfacial adhesion between superhydrophobic coatings FC-X (X = 1%, 2%, 3%, 4% and 5%) and the concrete substrate, along with the impact of FC-X on the water repellency characteristics of the concrete substrate.

One synthetic step was adopted to prepare novel F-SiO₂ NP hybrid fluororesin coating. The impact of varying mass fractions of F-SiO₂ NPs on the superhydrophobicity of FC-X was analyzed and subsequently confirmed through water contact angle (WCA) measurements. Superhydrophobic coatings were simply applied to the concrete substrate using a one-step spraying method. The interfacial adhesion between FC-X and the concrete substrate was analyzed using tape pasting tests and abrasion resistance measurements. The influence of FC-X on the water repellency of the concrete substrate was investigated through measurements of water absorption, impermeability and electric flux.

FC-4% exhibits excellent superhydrophobicity, with a WCA of 157.5° and a sliding angle of 2.3°. Compared to control sample, FC-X exhibits better properties, including chemical durability, wear resistance, adhesion strength, abrasion resistance, water resistance and impermeability.

This study offers a thorough investigation into the practical implications of enhancing the durability and water repellency of concrete substrates by using superhydrophobic coatings, particularly FC-4%, which demonstrates exceptional superhydrophobicity alongside remarkable chemical durability, wear resistance, adhesion strength, abrasion resistance, water resistance and impermeability.

Through the examination of the interfacial adhesion between FC-X and the concrete substrate, along with an assessment of FC-X’s impact on the water repellency of the concrete, this paper provides valuable insights into the practical application of superhydrophobic coatings in enhancing the durability and performance of concrete materials.

The current study’s goal is to investigate how lean, agile, resilient and sustainable human resource management (LARS HRM) affects green innovation and environmental performance, both directly and indirectly.

Partial least squares-structural equation modeling (PLS-SEM) was used to analyze the data based on a sample of 273 Tunisian businesses in the industrial and service sectors that were certified ISO 9001.

With the exception of AHRM–GPdtI, the results show that the mainstream advanced theory on direct effects was verified. With regard to indirect effects, everything of the literature that was presented was accepted, with the exception of the relationship between AHRM–GPdtI–EP, AHRM–GPssI–EP and RHRM–GPdtI–EP.

This research is distinctive in that it aims to incorporate every LARGS paradigm within the HRM field. By taking green innovation into consideration, it closes the current gaps on the direct and indirect effects of LARS HRM on environmental performance. Our study is unique in that it incorporates large, industry-operating, certified ISO 9001 firms with those in the service sector, with the goal of achieving greater generalization of results.

Integrating anxiety and uncertainty management (AUM) theory and theory of organizing, this study aims to contribute to the knowledge management literature by examining the interdependent and bidirectional nature of knowledge transfer between expatriates and host country nationals (HCNs). Specifically, the authors investigate how receivers’ cognitive response to senders’ behaviors during their interactions becomes an important conduit between senders’ behaviors and the successful transfer of knowledge.

The authors used the actor partner interdependence model to analyze data from 107 expatriate-HCN dyads. The authors collected the responses of these expatriate-HCN dyads in Shanghai, Taipei, Hong Kong, Vietnam, South Korea, Malaysia, Thailand, Indonesia and India.

Receivers’ interaction anxiety and uncertainty, as a response to senders’ relationship building behaviors, mediate the relationship between senders’ relationship building behaviors and successful knowledge transfer. When senders are expatriates, senders’ communication patience and relationship building behaviors interact to reduce the direct and indirect effects of both receivers’ interaction anxiety and uncertainty. However, when senders are HCNs, the moderation and moderated mediation models are not supported.

The study contributes to the knowledge management literature by investigating knowledge transfer between expatriates and HCNs using an interpersonal cross-cultural communication lens. The authors make refinements to AUM theory by going beyond the sender role to highlighting the interdependence between senders and receivers in the management of anxiety and uncertainty which, in turn, influences the effectiveness of cross-cultural communication. The study is also unique in that the authors underscore an important yet understudied construct, communication patience, in the successful transfer of knowledge.

This study investigates the relationship between corporate social responsibility (CSR) and financial performance of the banking sector from the prospective of emerging countries.

This study obtained balance sheet and income statement data for 173 banks in 20 emerging countries from the Bankscope database from 2005–2018. The CSR-related data were taken from the Thomson Reuters ASSET4 database. Moreover, macroeconomic controls such as GDP per capita, inflation, and financial development are attained from the GFDD. The series of institutional quality indices (Political Stability, Rule of Law, Control of Corruption, Government Effectiveness, and Regulatory Quality) is obtained from the WGI. At the same time, national culture and bank regulation are attained from Hofstede Insights and Barth et al. (2013). We used the panel fixed-effects model in our baseline estimations, while 2SLS and GMM were applied to control for endogeneity.

The finding shows that CSR activities significantly improve bank performance, but the effect varies across the bank. Only environmentally friendly activities have shown a significant positive relationship with banking performance for CSR dimensions. However, the social and government dimensions did not significantly affect bank performance. Moreover, a sound institutional and regulatory environment and national norms play an important role in the nexus of CSR activities and bank performance.

This study provides empirical evidence that sheds light on CSR and bank performance in an emerging market context.

With the development of science and technology, more creators are trying to use new crafts to represent the cultural trends of the social media era, which makes cultural heritage innovative and new genres emerge. This compels the academic community to examine craft from a new perspective. It is very helpful to understand the hidden representational structure of craft more deeply and improve the craft innovation system of cultural and creative products that we deconstruct the craft based on Complex Network and discover its intrinsic connections.

The research crawled and cleaned the craft information of the top 20% products on the Forbidden City’s cultural and creative products online and then performed Complex Network modeling, constructed three craft representation networks among function, material and technique, quantified and analyzed the inner connections and network structure of the craft elements, and then analyzed the cultural inheritance and innovation embedded in the craft representation networks.

The three dichotomous craft representation networks constructed by combining function, material and technique: (1) the network density is low and none of them has small-world characteristics, indicating that the innovative heritage of the craft elements in the Forbidden City’s cultural and creative products is at the stage of continuous exploration and development, and multiple coupling innovation is still insufficient; (2) all have scale-free characteristics and there is still a certain degree of community structure within each network, indicating that the coupling innovation of craft elements of the Forbidden City’s cultural and creative products is seriously uneven, with some specific “grammatical combinations” and an Island Effect in the network structure; (3) the craft elements with high network centrality emphasize the characteristics of decorative culture and design for the masses, as well as the pursuit of production efficiency and economic benefits, which represent the aesthetic purport of contemporary Chinese society and the ideological trend of production and life.

The Forbidden City’s cultural and creative products should continue to develop and enrich the multi-coupling innovation of craft elements, clarify and continue their own brand unique craft genes, and make full use of the network important nodes role.

This study aims to investigate the influence of the reviewed establishment’s price level and the user’s social network size and reputation status on consumers’ tendency to post more visual imagery content. Furthermore, it explores the moderating effects of user experiences and geographic distance on these dynamics.

This study adopts a multi-method approach to explore both the determinants behind the sharing of user-generated photos in online reviews and their internal mechanisms. Using a comprehensive secondary data set from Yelp.com, the authors focused on restaurant reviews from a prominent tourist destination to construct econometric models incorporating time-fixed effects. To enhance the robustness of the authors’ findings, the authors complemented the big data analysis with a series of controlled experiments.

The reviewed establishments price level and the users reputation status and social network size incite corresponding motivations conspicuous display “reputation seeking” and social approval motivating users to incorporate more images in reviews. “User experiences can amplify the influence of these factors on image sharing.” An increase in the users geographical distance lessens the impact of the price level on image sharing, but it heightens the influence of the users reputation and social network size on the number of shared images.

As a result of this study, high-end establishments can increase their online visibility by leveraging user-generated visual content. A structured rewards program could significantly boost engagement by incentivizing photo sharing, particularly among users with elite status and extensive social networks. Additionally, online review platforms can enhance users’ experiences and foster more dynamic interactions by developing personalized features that encourage visual content production.

This research, anchored in trait activation theory, offers an innovative examination of the determinants of photo-posting behavior in online reviews by enriching the understanding of how the intricate interplay between users’ characteristics and situational cues can shape online review practices.

Project managers bear the responsibility of selecting and developing resource scheduling methods that align with project requirements and organizational circumstances. This study focuses on resource-constrained project scheduling in multi-project environments. The research simplifies the problem by adopting a single-project perspective using gain coefficients.

It employs uncertainty theory and multi-objective programming to construct a model. The optimal solution is identified using Matlab, while LINGO determines satisfactory alternatives. By combining these methods and considering actual construction project situations, a compromise solution closely approximating the optimal one is derived.

The study provides fresh insights into modeling and resolving resource-constrained project scheduling issues, supported by real-world examples that effectively illustrate its practical significance.

The research highlights three main contributions: effective resource utilization, project prioritization and conflict management, and addressing uncertainty. It offers decision support for project managers to balance resource allocation, resolve conflicts, and adapt to changing project demands.