Search results

This paper aims to explore the influence of CO₂ partial pressure, flow rate and water cut on N80 steel corrosion behaviors in the displacement process of oil in glutenite reservoir by CO₂ injection.

A self-made 3 L high-temperature and high-pressure autoclave was used to conduct corrosion simulation experiments of N80 steel in different CO₂ partial pressures, flow rates and water cut (the independently developed oil and water mixing approach can ensure the uniform mixing of oil and water in experiments). Techniques like weight loss and surface analysis were used to analyze the corrosion behaviors of N80 steel under different conditions.

Results showed that the average corrosion rate of N80 steel accelerated at varying degrees with the increase of CO₂ partial pressure, flow rate and water cut. Excluding that the samples showed uniform corrosion under the two conditions of 0.5MPa CO₂ partial pressure and static corrosion, they displayed mesa attack corrosion under other conditions. Besides, with the increase of CO₂ partial pressure, the pH value of solution dropped and the matrix corrosion speed rose, hence leading to the increased Fe²⁺ and CO₃²⁻ concentration. Meanwhile, a lowered pH value improved the FeCO₃ critical supersaturation, thereby leading to an increased nucleation rate/growth rate and ultimately causing the decrease of the dimension of FeCO₃ crystallites formed on the surface of the samples.

The results can be helpful in targeted anti-corrosion measures for CO₂/oil/water corrosive environment.

The purpose of this paper is to investigate a five-phase permanent-magnet synchronous machine (PMSM) that features high-power density and high-fault-tolerant capability for electric vehicles (EVs).

The five-phase 20-slot/18-pole PMSM is designed by finite-element method. Two typical rotor structures which include Halbach array and rotor eccentricity are compared to achieve sinusoidal back electromotive force (EMF). The influence of slot dimensions on leakage inductance and short-circuit current is analyzed. The method to reduce eddy current loss of permanent magnets (PMs) is investigated. The machine performances under both healthy and fault conditions are evaluated. Finally, thermal behavior of the machine is studied by Ansys.

With both no-load and load performances considered, rotor eccentricity is proposed to reduce the harmonic contents of EMF. Increasing slot leakage inductance is an effective way to limit the short-circuit current. By segmenting PMs in circumferential direction, the PM eddy current loss is reduced and the machine efficiency is improved. With proper fault-tolerant control strategy, acceptable torque performance can be achieved under fault conditions. The proposed machine can safely operate under Class F insulation.

So far, many researches focus on multiphase PMSMs used in aviation fields, such as fuel pump and electric actuator. Differing from PMSMs used in aviation applications, machines for EVs require characteristics like wide speed ranges and variable operating conditions. Hence, this paper proposes a five-phase 20-slot/18-pole PMSM for EVs. The proposed design methodology is applicable to multiphase PMSMs with different slot/pole combinations.