Search results

This papers aims to study lattice structures in terms of geometric variables, manufacturing variables and material-based variants and their correlation with compressive behaviour for their application in a methodology for the design and development of personalized elastic therapeutic products.

Lattice samples were designed and manufactured using extrusion-based additive manufacturing technologies. Mechanical tests were carried out on lattice samples for elasticity characterization purposes. The relationships between sample stiffness and key geometric and manufacturing variables were subsequently used in the case study on the design of a pressure cushion model for validation purposes. Differentiated areas were established according to patient’s pressure map to subsequently make a correlation between the patient’s pressure needs and lattice samples stiffness.

A substantial and wide variation in lattice compressive behaviour was found depending on the key study variables. The proposed methodology made it possible to efficiently identify and adjust the pressure of the different areas of the product to adapt them to the elastic needs of the patient. In this sense, the characterization lattice samples turned out to provide an effective and flexible response to the pressure requirements.

This study provides a generalized foundation of lattice structural design and adjustable stiffness in application of pressure cushions, which can be equally applied to other designs with similar purposes. The relevance and contribution of this work lie in the proposed methodology for the design of personalized therapeutic products based on the use of individual lattice structures that function as independent customizable cells.

Despite the technological paradigm shift presented to the architecture, engineering, construction and operations sector (AECO), the full-fledged acceptance of the building information modelling (BIM) methodology has been slower than initially anticipated. Indeed, this study aims to acknowledge the need for increasing supportive technologies enabling the use of BIM, attending to available human resources, their requirements and their tasks.

A complete case study is described, including the development process centred on design science research methodology followed by the usability assessment procedure validated by construction projects facility management operational staff.

Results show that participants could interact with BIM using openBIM processes and file formats naturally, as most participants reached an efficiency level close to that expected for users already familiar with the interface (i.e. high-efficiency values). These results are consistent with the reported perceived satisfaction and analysis of participants’ discourses through 62 semi-structured interviews.

The contributions of the present study are twofold: a proposal for a virtual reality openBIM framework is presented, particularly for the semantic enrichment of BIM models, and a methodology for evaluating the usability of this type of system in the AECO sector.

This paper aims to study the influence of leisure-time physical activity on depression crises and the difficulty in performing light household tasks.

A population-based cross-sectional study was conducted using data from the 2020 European Health Survey in Spain. A total of 1,076 individuals diagnosed with depression were selected. ANOVA, chi-square, Fisher’s exact test and Mann–Whitney U test were applied, and a simple moderation analysis was conducted using the SPSS PROCESS 4.0 macro.

Women had higher percentages of some or much difficulty in performing domestic activities (p = 0.007). Differences were found between experiencing a crisis in the past 12 months versus not having one (p < 0.001): less physical activity was performed, perceived health was worse and difficulty in performing domestic activities increased. The moderation analysis confirmed the moderating effect of physical activity on the relationship between experiencing a crisis and having difficulty with domestic activities (p = 0.017).

The usual limitation of descriptive cross-sectional studies, which cannot establish causal relationships, must be added to low sample sizes in some categories.

The analysis with gender differentiation, promoting gender-specific adapted practices, considering age and personal circumstances of the patient, appropriate exercise prescription, as well as its evaluation and follow-up, are areas where specialist nurses need to delve deeper to enhance the quality of care.

Leisure-time physical activity moderates the relationship between experiencing a crisis and having difficulty with light household tasks: those who engage in occasional physical activity have less difficulty compared to those who do not engage in it.

There is no consensus on the most effective way to foster entrepreneurship in educational institutions, and educational policies on entrepreneurial activity differ significantly amidst organizations and contexts. Thus, the objective of this research is to analyze influence of the college environment and entrepreneurial characteristics on the entrepreneurial intention of Brazilian high school/technical students.

The empirical research used partial least squares structural equation modeling (PLS-SEM) and a sample of 384 students of technical courses, such as Administration, Systems Development, Chemistry, Secretariat, among others.

The proposed model was validated, and the hypotheses were confirmed, proving suitable for high school/technical education. Assessing the high school environment with this model can help determine each organization's strengths and weaknesses and, indeed, the impacts on the ecosystems in which it operates. The results of the multi-group analysis indicate differences concerning the courses as well.

The main limitations involve non-probabilistic sampling procedures and the collection having been carried out with a single cross-section.

For managers and teachers, this article presents indicators to qualify the activities of the educational environment, considering teaching activities, extracurricular activities, fairs, actions of teachers and students, among other initiatives.

The article contributes to high school managers, particularly in technical schools, so that they understand the factors that influence the profile and entrepreneurial intention of students; in other words, something that can impact the lives of thousands of students, teachers and the community itself.

This research presents a novel analysis of the antecedents that drive student entrepreneurship in an underexplored educational context in a developing country. The results show the necessary conditions for technical schools to foster entrepreneurial activity, feeding innovation ecosystems with entrepreneurial talent.

This study aims to conduct performance and clustering analyses with the help of Digital Government Reference Library (DGRL) v16.6 database examining the role of emerging technologies (ETs) in public services delivery.

VOSviewer and SciMAT techniques were used for clustering and mapping the use of ETs in the public services delivery. Collecting documents from the DGRL v16.6 database, the paper uses text mining analysis for identifying key terms and trends in e-Government research regarding ETs and public services.

The analysis indicates that all ETs are strongly linked to each other, except for blockchain technologies (due to its disruptive nature), which indicate that ETs can be, therefore, seen as accumulative knowledge. In addition, on the whole, findings identify four stages in the evolution of ETs and their application to public services: the “electronic administration” stage, the “technological baseline” stage, the “managerial” stage and the “disruptive technological” stage.

The output of the present research will help to orient policymakers in the implementation and use of ETs, evaluating the influence of these technologies on public services.

The research helps researchers to track research trends and uncover new paths on ETs and its implementation in public services.

Recent research has focused on the need of implementing ETs for improving public services, which could help cities to improve the citizens’ quality of life in urban areas. This paper contributes to expanding the knowledge about ETs and its implementation in public services, identifying trends and networks in the research about these issues.

This paper aims to determine whether policy uncertainty caused by institutional decay in countries with populist rulers influences the internationalization decision of emerging market firms (EMFs).

The study used binary logit analysis on firms from Latin American countries undertaking cross-border greenfield investment projects.

The results suggest that internationalization decision is demotivated by policy uncertainty generated by populist chief executives and promoted by that of political parties.

This study uses populist rhetoric to describe policy uncertainty due to chief executives and ruling parties, which influences internationalization decision by increasing anticipated transaction costs. This inquiry identifies populism as a variable that influences EMFs to internationalize, while empirically testing the claim of theoretical scholarship that populism reconfigured the sociopolitical and institutional forces that shape the world’s business. This study further advances institutional theory by offering a fresh perspective on the influence of home instead of host-country institutions on the internationalization motivation of firms due to institutional decay caused by populist regimes.

This study aims to deal with the paucity of studies in the stages of the development of loyalty behaviour of customers in the healthcare context by incorporating three crucial service quality dimensions (physical environment, personnel quality and technical quality) and also investigating trust and commitment as mediating factors.

Survey data were obtained from 420 respondents admitted to government hospitals in Kerala employing a convenience sampling method. The formulated hypotheses were tested using partial least square structural equation modelling.

Results indicate that patient satisfaction, trust and commitment can create favourable behavioural intentions amongst patients. When patients reveal higher trust, they are more inclined to value healthcare services and willing to commit to a long-term relationship, resulting in increased patient loyalty.

Organisational efforts should improve trust and commitment and build a good relationship between service providers and patients. Efforts should be taken to raise the standard of technical and personnel aspects, and a focus on physical infrastructure should also be considered to build a favourable behavioural intention to revisit and positive referrals.

This is the first empirical study to analyse technical quality, personnel quality and physical environment along with the mediating effect of trust, and commitment in a four-stage loyalty development model in the healthcare context of Kerala, India.

The purpose of this paper is to review cases of artificial reefs built through additive manufacturing (AM) technologies and analyse their ecological goals, fabrication process, materials, structural design features and implementation location to determine predominant parameters, environmental impacts, advantages, and limitations.

The review analysed 16 cases of artificial reefs from both temperate and tropical regions. These were categorised based on the AM process used, the mortar material used (crucial for biological applications), the structural design features and the location of implementation. These parameters are assessed to determine how effectively the designs meet the stipulated ecological goals, how AM technologies demonstrate their potential in comparison to conventional methods and the preference locations of these implementations.

The overview revealed that the dominant artificial reef implementation occurs in the Mediterranean and Atlantic Seas, both accounting for 24%. The remaining cases were in the Australian Sea (20%), the South Asia Sea (12%), the Persian Gulf and the Pacific Ocean, both with 8%, and the Indian Sea with 4% of all the cases studied. It was concluded that fused filament fabrication, binder jetting and material extrusion represent the main AM processes used to build artificial reefs. Cementitious materials, ceramics, polymers and geopolymer formulations were used, incorporating aggregates from mineral residues, biological wastes and pozzolan materials, to reduce environmental impacts, promote the circular economy and be more beneficial for marine ecosystems. The evaluation ranking assessed how well their design and materials align with their ecological goals, demonstrating that five cases were ranked with high effectiveness, ten projects with moderate effectiveness and one case with low effectiveness.

AM represents an innovative method for marine restoration and management. It offers a rapid prototyping technique for design validation and enables the creation of highly complex shapes for habitat diversification while incorporating a diverse range of materials to benefit environmental and marine species’ habitats.

Heavy rainfall is one of the main causes of the degradation of historic rammed Earth architecture. For this reason, ensuring the conservation thereof entails understanding the factors involved in these risk situations. The purpose of this study is to research three past events in which rainfall caused damage and collapse to historic rammed Earth fortifications in Andalusia in order to analyse whether it is possible to prevent similar situations from occurring in the future.

The three case studies analysed are located in the south of Spain and occurred between 2017 and 2021. The hazard presented by rainfall within this context has been obtained from Art-Risk 3.0 (Registration No. 201999906530090). The vulnerability of the structures has been assessed with the Art-Risk 1 model. To characterise the strength, duration, and intensity of precipitation events, a workflow for the statistical use of GPM and GSMaP satellite resources has been designed, validated, and tested. The strength of the winds has been evaluated from data from ground-based weather stations.

GSMaP precipitation data is very similar to data from ground-based weather stations. Regarding the three risk events analysed, although they occurred in areas with a torrential rainfall hazard, the damage was caused by non-intense rainfall that did not exceed 5 mm/hour. The continuation of the rainfall for several days and the poor state of conservation of the walls seem to be the factors that triggered the collapses that fundamentally affected the restoration mortars.

A workflow applied to vulnerability and hazard analysis is presented, which validates the large-scale use of satellite images for past and present monitoring of heritage structure risk situations due to rain.