Search results

Exposure to isocyanates was the leading cause of occupational asthma in the UK. Motor vehicle repair (MVR) bodyshop paint sprayers were at greatest risk, despite widespread use of air-fed breathing apparatus and ventilated booths. Most paint sprayers work in small and medium enterprises (SMEs). The purpose of the Health and Safety Executive (HSE) project, described in this paper, is to improve exposure control measures in at least 20 per cent of MVR bodyshops, and reduce the risk of occupational asthma. The paper aims to discuss this issue.

A three-stranded plan consisted of: Safety and Health Awareness Days (SHADs); workplace inspections; and third-party stakeholder communications. The impact of various parts of the project were evaluated.

Approximately 18 per cent of bodyshops in the UK attended one of 32 SHADs, following which over 90 per cent of delegates expressed an “intention to act” to improve exposure control measures. A local assessment showed that at least 50 per cent of bodyshops improved exposure control measures. An evaluation of 109 inspections found that enforcement action was taken at 40 per cent of visits. Third-party engagement produced a joint HSE-industry designed poster, new agreed guidance on spray booths and dissemination of SHAD material. Knowledge of booth clearance time has become widespread, and 85 per cent of booths now have pressure gauges. Biological monitoring data show that, post-SHAD, exposures were lower.

A sustained national project using clear, relevant, tested messages delivered via different routes, had a sector-wide impact in bodyshops. It is probable that the project has improved isocyanate exposure control in at least 20 per cent of bodyshops. The generic lessons could be applied to other widespread SME businesses.

This paper aims to exemplify the use of project management tools in the scheduling of aircraft maintenance activities. This process is known as maintenance, repair and overhaul and it has gained importance within the aeronautical sector due to its expected growth in the coming years; however, it also faces increasing competitiveness in its market. This fact gives rise to the need of acting in maintenance management and seeking lower costs while maintaining the quality of the service provided. The purpose of this paper is to propose the structuring of a procedure that aims to reduce the total maintenance time (downtime) and guarantee the delivery of the aircraft on time.

The paper, through a case study at a Brazilian aircraft maintenance center, used critical path method and critical chain project management, the latter being derived from the theory of constraints, with the purpose of analyzing resources systematically and synchronizing the activities in the precedence network.

As a result, it is shown that downtime can be reduced from 11 to 5 days and improvements are proposed to achieve greater market competitiveness.

This paper demonstrates the competitive advantage that resulted from the application of project management tools in the aircraft maintenance planning and execution.

The purpose of this study is to demonstrate the potential of three-dimensional printing technology for the remanufacturing of end-of-life (EoL) composites. This technology will enable the rapid fabrication of environmentally sustainable structures with complex shapes and good mechanical properties. These three-dimensional printed objects will have several application fields, such as street furniture and urban renewal, thus promoting a circular economy model.

For this purpose, a low-cost liquid deposition modeling technology was used to extrude photo-curable and thermally curable composite inks, composed of an acrylate-based resin loaded with different amounts of mechanically recycled glass fiber reinforced composites (GFRCs). Rheological properties of the extruded inks and their printability window and the conversion of cured composites after an ultraviolet light (UV) assisted extrusion were investigated. In addition, tensile properties of composites remanufactured by this UV-assisted technology were studied.

A printability window was found for the three-dimensional printable GFRCs inks. The formulation of the composite printable inks was optimized to obtain high quality printed objects with a high content of recycled GFRCs. Tensile tests also showed promising mechanical properties for printed GFRCs obtained with this approach.

The novelty of this paper consists in the remanufacturing of GFRCs by the three-dimensional printing technology to promote the implementation of a circular economy. This study shows the feasibility of this approach, using mechanically recycled EoL GFRCs, composed of a thermoset polymer matrix, which cannot be melted as in case of thermoplastic-based composites. Objects with complex shapes were three-dimensional printed and presented here as a proof-of-concept.

Neuroleptic non-compliance remains a serious challenge for the treatment of psychosis. Non-compliance is predominantly attributed to side effects, lack of illness insight, reduced well-being or poor therapeutic alliance. However, other still neglected factors may also play a role. Further, little is known about whether psychiatric patients without psychosis who are increasingly prescribed neuroleptics differ in terms of medication compliance or about reasons for non-compliance by psychosis patients. As direct questioning is notoriously prone to social desirability biases, we conducted an anonymous survey. After a strict selection process blind to results, 95 psychiatric patients were retained for the final analyses (69 participants with a presumed diagnosis of schizophrenia psychosis, 26 without psychosis). Self-reported neuroleptic non-compliance was more prevalent in psychosis patients than non-psychosis patients. Apart from side effects and illness insight, main reasons for non-compliance in both groups were forgetfulness, distrust in therapist, and no subjective need for treatment. Other notable reasons were stigma and advice of relatives/acquaintances against neuroleptic medication. Gain from illness was a reason for non-compliance in 11-18% of the psychosis patients. Only 9% of all patients reported no side effects and full compliance and at the same time acknowledged that neuroleptics worked well for them. While pills were preferred over depot injections by the majority of patients, depot was judged as an alternative by a substantial subgroup. Although many patients acknowledge the need and benefits of neuroleptic medication, non-compliance was the norm rather than the exception in our samples.

Major gaps exist in the documented history of occupational therapy in Ireland. The purpose of this paper is to contribute to filling these gaps by providing an overview of three major transitions in Irish occupational therapy in the century preceding the opening of St. Joseph?s College of Occupational Therapy in 1963. Research on occupational therapy’s past is valuable not only for recording and commemorating key events and individuals but also for allowing reflection on and questioning of contemporary practice and assumptions.

This descriptive paper draws on multiple documentary sources to present an overview of the first 100 years of the use of occupation as therapy/occupational therapy in Ireland from 1863 to 1963.

Three major transitions in occupational therapy in Ireland are presented: from moral treatment and the use of occupation as therapy to medical patronage of occupational therapy, from medical patronage to the early/pre-professional era and finally from the pre-professional era to the era of professionally qualified occupational therapists. To illustrate these transitions, a small number of individuals and their contributions are discussed including Dr Eamon O’Sullivan, Dr Ada English, Donal Kelly, Olga Gale and Ann Beckett.

This paper charts the foundations upon which the currently thriving profession of occupational therapy are built. The Association of Occupational Therapists of Ireland recently celebrated their 50th anniversary (AOTI, 2015a), and in 2017, it is 100 years since occupational therapy was formalised in Clifton Springs, New York, USA. Occupational therapy is a relatively young profession, and great opportunities exist to research its history in Ireland to capture the memories and experiences of the pioneers who laid the foundation of the profession as well as to situate the development of the profession in the broader social, cultural and scientific contexts within which it developed.

The purpose of the study is to test if it, by the use of a survey methodology, is possible to measure managers' awareness on, and specifically if there exist preconceived beliefs on, overall equipment effectiveness (OEE) results. The paper presents the design of the survey methodology as well as a test of the survey in one case company.

Actual OEE logs from a case company are collected and a survey on the data is designed and managers at the same case company are asked to answer the survey. The survey results are followed-up by an interview study in order to get deeper insights to both the results of the survey as well as the OEE strategy at the case company.

The findings show that the managers at this particular case company, on a general level, does not suffer too much from preconceived beliefs. However, it is clear that the managers have a preconceived belief that lack of material is logged as a loss much more often than what it actually is.

The test has only been performed with data from one case company within the automotive manufacturing industry and only the managers at that case company has been active in the test.

The survey methodology can be replicated and used by other companies to find out how aware their employees are on their OEE results and if possible preconceived beliefs exists.

To the authors' knowledge, this is the first attempt at measuring if preconceived beliefs on OEE results exist.

The paper seeks to bridge the already familiar benefits of 3D printing (3DP) to the rehabilitation of cultural heritage, still based on the use of complex and expensive handcrafted techniques and scarce materials.

A compilation of different information on frequent anomalies in cultural heritage buildings and commonly used materials is conducted; subsequently, some innovative techniques used in the construction sector (3DP and 3D scanning) are addressed, as well as some case studies related to the rehabilitation of cultural heritage building elements, leading to a reflection on the opportunities and challenges of this application within these types of buildings.

The compilation of information summarised in the paper provided a clear reflection on the great potential of 3DP for cultural heritage rehabilitation, requiring the development of new mixtures (lime mortars, for example) compatible with the existing surface and, eventually, incorporating some residues that may improve interesting properties; the design of different extruders, compatible with the new mixtures developed and the articulation of 3D printers with the available mapping tools (photogrammetry and laser scanning) to reproduce the component as accurately as possible.

This paper sets the path for a new application of 3DP in construction, namely in the field of cultural heritage rehabilitation, by identifying some key opportunities, challenges and for designing the process flow associated with the different technologies involved.

Poor quality in building projects is high and increasing. Poor quality can increase the cost of a building by up to more than 50% and can delay a project by up to 50%. This research investigated the poor quality of building elements/components.

The site operatives were requested to rate the frequency of poor quality in 25 building elements/components. The frequencies of the poor quality were scored on a five-point Likert scale, ranging from least often to extremely often. The survey forms were administered to construction site operatives by hand delivery.

The data revealed that poor quality occurred in more than 80% of the building projects completed. Approximately 40% of the cost of a building project is attributed to poor quality. In total, 70% of the respondents measured the poor quality of building elements as being high and frequent. The size and frequency of poor quality are higher in concrete, plaster, brick, foundations and roof trusses.

The research findings would help to reduce claims, disputes, maintenance costs and waste on sites.

This research provides fresh information on poor quality in building projects and provides a systemic process for anticipating poor quality in building projects. The findings also provide an option to increase maintenance span and a means to reduce claims and disputes in the construction sector.

Discrimination against LGBTQ+ people in South Africa has shifted from overt hate crimes to covert microaggressions. Microaggression is a term used in psychology to describe casual discrimination against socially marginalised groups, and they occur in three forms: microassaults, microinsults and microinvalidations. Microassaults include verbal and non-verbal discriminatory behaviours. Microinsults include actions or statements which demean a person's identity, and microinvalidations negate the thoughts, feelings or lived experiences of a certain people. Microaggressions have detrimental impacts on lives of people experiencing them and on their interpersonal relationships. The chapter presents a focus on microaggression theory together with microaggression experiences of South African Indian LGBTQ+ people, who have been under-researched. Reference is made to interview extracts from research studies focusing on South African Indian LGBTQ+ people and from e-zine articles focusing on the experiences of South African Indian LGBTQ+ people.

This paper aims to show that tourism is one of the most perfect creations of the capitalist mode of production insofar as not only does it consume places and territories and perpetuate dependency relations, but in the expressive dimension, it also produces feelings and meanings and generates a new relationship of the past with the present and future (chronotope).

The study was carried out using a socio-anthropological approach with participant observation over several decades.

The modes of time are described and how the tourism chronotope shapes the historic centre of a consolidated tourist destination. The case study, analysed with the model of the “conversion of place through the mediation of tourism space”, illustrates the prevalence of instrumental and commercial values over one’s own aesthetic-expressive values in tourism contexts. This fact encourages the emergence of local political projects and the incorporation of uniformities outside the local place. These processes end up uprooting the anchors from collective memory. The definition of territories according to visitors’ imaginaries and expectations encourages the abusive occupation of public space and the adoption of new aesthetic attributes of urban space.

Because of the chosen research approach and methodologies, the research results may lack generalisability. Therefore, researchers are encouraged to test both the model and the propositions further.

This study approaches the relationship of the idea Tourism with the idea Development based on the anchors of memory.