Search results

The purpose of this paper is to investigate the performance of Passive Direct Methanol Fuel Cell (PDMFC) experimentally using various Membrane Electrode Assembly (MEA) shapes such as square, rectangle, rhombus, and circle with equal areas and equal perimeters. The variation in MEA shape/size is achieved by altering gasket openings in the dynamic regions.

In the equal areas of MEA shapes, gasket opening areas of 1963.5 (+/−0.2) mm2 are used. Whereas in the equal perimeters of shapes, gasket opening perimeters of 157.1 (+/−0.2) mm are used. In this experimentation, Nickel-201 current collectors with 45.3% of circular openings are used on both the anode and cathode sides. The experiment is carried out at a 5 molar methanol concentration to find out the highest power density of the cell.

In the equal areas, among the shapes that are chosen for investigation, the square shape opening consisting of a perimeter of 177.2 mm has developed a maximum power density of 6.344 mWcm⁻² and a maximum current density of 65.2 mAcm⁻². Similarly, in equal perimeters, the rhombus shape opening with an area of 1400 mm2 has developed a maximum power density of 7.714 mWcm⁻² and a maximum current density of 85.3 mAcm⁻².

The novelty of this research work is instead of fabricating various shapes and sizes of highly expensive MEAs, the desired shapes and sizes of the MEA are achieved by altering gasket openings over dynamic regions to find out the highest power density of the cell.

It is generally known that the perforated section such as the castellated section is good to sustain distributed loads but inadequate to sustain highly concentrated loads. Therefore, it is possible to design the opening in a different arrangement of web opening to achieve section efficiency, thus improving the strength and torsional behaviour of the section with web opening. This study aims to focus on the finite element analysis of I-beam with and without openings in steel section dominated to lateral-torsional buckling behaviour.

In this work, the analysis of different sizes, shapes and arrangements of web opening is performed by using LUSAS application to conduct numerical analysis on lateral-torsional buckling behaviour. This involves three diameter sizes of web opening, five types of opening shapes and two criteria of the model.

The section with c-hexagon web opening was placed about 200-mm centre to centre and 100-mm edge distance, contribute to 7.26% increase of buckling capacity. For the section with 150-mm centre to centre and 50-mm edge distance, the occurrence of local buckling contributes to decrease of lateral buckling section capacity to 19.943 kNm, where pure lateral-torsional buckling mostly occurred because of prevented section. Besides that, the web opening diameter was also analysed. The web crippling was observed because of the increase of opening diameter from 0.67 to 0.80 D.

This contributes to a decrease in buckling capacity as figured in the contour of the deformed shape. For Model 1, an increase of buckling capacity (31.46%) is observed when the opening diameter are changed from 0.67 to 0.80 D.

Cold-formed steel has been used extensively as secondary elements such as purlins and girts in building frames. Purlin is critical to the structure of the roof because it supports the weight of the roof deck and aids to make the entire roof structure more rigid. Furthermore, cold-formed steel purlin is a replacement for wood purlin because steel purlins are light weight and more economical. Hence, the purpose of this study to investigate the effect of opening due to torsion behaviour.

This analysis used cold-formed steel hat purlin with and without openings (WOs) under different opening shape, location and spacing by using finite element LUSAS software.

The finite element results showed that purlin with openings had higher angle of rotation than section WO, with a percentage difference of not more than 6%. When the opening was located at mid-span, the angle of rotation reduced. Angle of rotation increased when the opening spacing increased. Number of openings also affected the torsional behaviour of the purlin. Five opening shapes, which were circle, diamond, C-hexagon, square and elongated circle, were studied. Among all the shapes, purlin with diamond opening was more resistance to torsion.

The use of cold-formed steel section with web openings (rectangular or circular) is a practical solution when it is required to pass service ducts through the structural member. However, the presence of opening gives minor effect on the structural behaviour of cold-formed steel hat purlin.

The purpose of this paper is to fill a gap in the literature regarding the open innovation management approaches that small and medium-sized enterprises (SMEs) can use to access digital technologies and incorporate them into their organizational processes. The research question is: What organizational and process-level managerial actions do SMEs take to successfully access and implement digital technologies within their organizational processes?

Using Guertler et al.'s (2020) Action Innovation Management Research (AIM-R) framework, this study examines the digital transformation experiences of 10 European SMEs to gain insights into the managerial actions that foster successful digital transformation.

The findings of the paper reveal two major contributions. First, a digital transformation roadmap for SMEs is proposed, with a focus on accessing external resources and reconfiguring internal ones to ease their digital transformation journey. Second, three distinct paradoxes that influence the digital transformation process in SMEs are highlighted, providing useful insights into the challenges and tensions SMEs face during this journey.

This paper provides a unique perspective on the digital transformation of SMEs by examining the managerial actions required for successful technology adoption and revealing the paradoxes that may emerge during this transformative process. The findings form the basis for future research, deepening our understanding of digital transformation in SMEs and providing actionable advice to managers and practitioners navigating this journey.

The paper aims at studying the effect of management practices on the extensive and intensive export margins of Egyptian manufacturing firms.

The study relies on the 2020/2021 Egyptian Industrial Firm Behavior Survey (EIFBS) which comprises 2,383 manufacturing firms representing small, medium, and large sized firms located in different regions of Egypt: Urban Governorates, Lower Egypt, and Upper Egypt. It constructs an overall management z score for each firm to estimate its effect on a firm’s probability of exporting and value of exports using Ordinary Least Squares (OLS) regressions.

Results indicate that good management is associated with a higher probability of firm exporting as well as higher export revenues conditional on exporting, robust to controlling for the level of domestic sales. These effects do not differ by firm ownership or type of sector, but rather by firm size, with managerial competence raising the probability of exporting more for large-sized firms. Additionally, good management is associated with higher firm productivity, innovation and worker training propensities which gives evidence that it is both an efficiency and a quality enhancer. Moreover, monitoring and targeting practices have significant positive effects on both margins, while incentives are only significant for the extensive margin.

Firms that aim at enhancing their export prospects and revenues should devote resources to review and upgrade their management systems to boost their product quality and production efficiency. Policy-wise, the government should create a competitive market environment that is open to both domestic and foreign firms’ entry to stimulate the adoption of better management practices.

The paper is the first to explore the link between firm management practices and export outcomes for a MENA country (Egypt). It makes use of a recent survey, the 2020/2021 Egyptian Industrial Firm Behavior Survey (EIFBS). The findings shed light on the importance of different management components (monitoring, targeting and incentives) in driving a manufacturing firm’s export performance.

Science mapping is an essential application of visualization technology widely used in safety, construction management and environmental science. The purpose of this study was to explore thermal comfort in residential buildings (TCinRB) research in India, identify research trends using a science mapping approach and provide a perspective for recommending future research in TCinRB.

This study used the VOSviewer tool to conduct a systematic analysis of the development trend in TCinRB studies in India based on Scopus Index articles published between 2001 and 2020. The annual numbers of articles, geographical locations of studies, major research organizations and authors, and the sources of journals on TCinRB were presented based on the analysis. Then, using co-authorship analysis, the collaborations among the major research groups were reported. Furthermore, research trends on TCinRB studies were visually explored using keyword co-occurrence analysis. The emerging research topics in the TCinRB research community were discovered by analyzing the authors’ keywords.

The findings revealed that studies had been discovered to pay more attention to north-east India, vernacular architecture, Hyderabad apartments and temperature performance in the past two decades. Thermal adaptation, composite climate, evaporative cooling and clothing insulation are emerging research areas in the TCinRB domain. The findings summarized mainstream research areas based on Indian climatic zones, addressed current TCinRB research gaps and suggested future research directions.

This review is particularly significant because it could help researchers understand the body of knowledge in TCinRB and opens the way for future research to fill an important research gap.

This study aims to predict the consequences associated with the propagation of the flood wave that may occur after the failure of the Taksebt dam and suggest an efficient emergency action plan for mitigation purposes.

To achieve the objectives of this study, the hydrodynamic model HEC-RAS 2D was used for the flood routing of the dam-break wave, which gave an estimate of the hydraulic characteristics downstream the Taksebt dam.

Geospatial analysis of the simulation results conducted in a geographic information system (GIS) environment showed that many residential areas are considered to be in danger in case of the Taksebt dam-break event. Based on the obtained results, an emergency actions plan was suggested to moderate the causalities in the downstream area at risk.

Overall, this study showed that the integration of 2D hydraulic modeling and GIS provides great capabilities in providing realistic view of the dam-break wave propagation that enhances assessing the associated risks and proposing appropriate mitigation measures.

This paper aims to examine how the interrelation between architecture and the physical environment came to prominence and influenced the pioneering modernist architects to acquire the features of modern architecture that the British modernists later adopted. How the post-war urban poor of Britain, suffering from ill-health and dire need of sun, air and a good environment, played an essential role in alleviating the environmental concerns of the modern movement architects.

The methodology of this research involves a comprehensive architectural analysis of the Finsbury Health Centre alongside an in-depth historical investigation of modernist design principles. This review article examines books, articles and some archival materials, such as recordings, pictures, etc. on the early phase of British modernism and its environmental dimension by looking at the works of historians, architects and critics.

Design based on modernist principles. While it can be seen as the political agenda of the Labor Party, this building was not only functionally efficient but also represented the biometric concerns of modern architecture with the most natural means.

While this study provides valuable insights, it may be limited by historical documents and data availability.

The originality and value of this paper lie in its examination of the Finsbury Health Centre as a case study, shedding light on the environmental rhetoric of modernism in historic architecture. By providing a holistic assessment of the building’s environmental aspects, this research contributes to both architectural history and contemporary sustainable design practices.

Challenges of conducting site visit activities, a vital component of architecture learning during the recent pandemic have proved our unreadiness in facing the digital future. The lack of understanding of learning technology has affected the education experience. Thus, there is a need to investigate immersive learning technology such as immersive virtual reality (IVR) to replace students’ concrete experience in the current learning setting. This study aims to answer: (1) What is the influence of IVR in experiential learning (EL) in enhancing the personal spatial experience? (2) Does IVR in EL influence students' approach to learning during the architecture design process?

The research was conducted as an action research design approach. Action research was employed in the first-year architecture design studio by the lecturer as a practitioner-researcher. The personal spatial experience survey was performed in the earlier phase to identify the students’ prior spatial experience. Architectural Spatial Experience Simulation (ASES) a learning tool was implemented and assessed with Architecture Design Learning Assessment (ADLA) rubric, which was developed to evaluate EL and student’s approach to learning during the architecture design learning process.

The outcomes revealed that ASES as a learning tool in EL could improve the participants’ spatial experience, particularly those with minimal prior personal spatial experience. ASES was recognized to enhance the participants’ EL experience and encourage changes in student’s approach to learning from surface to deep learning.

This research benefits the architecture design learning process by offering a learning tool and a framework to resolve challenges in performing site visit activities and digital learning. It also contributes by expanding the EL theory and students’ approach to learning knowledge in the architecture education field.

This paper takes a prudent approach to assessing the quality of greenspace in low- and high socio-economic status (SES) settings. Socio-economic data from deprivation indexes were used to systematically define low- and high-SES suburbs. A Geographical Information System (GIS) observation of greenspaces was used to score spaces according to a scoring criterion contingent on six quality facets. Statistics were then synthesised, producing a Cohen effect score highlighting disparities in each criterion between the two SES groups.

As the phenomena of locational prejudice and meritocratic inequality continue to garner global attention, this paper extrapolates this to a world-renown metropolis, Melbourne. This paper endeavours to provide invaluable insights into the environmental injustice paradigm within greenspace and its respective quality.

Conclusive results affirmed a concerning disparity in the quality of greenspace between Melbourne's low- and high-SES settings. Cohen's effect size found that on average, there was a “medium” distinction between the spaces, whilst an individual focus on the quality facets concluded diverse findings.

The core of study adopted a meticulous virtual assessment to critique the quality of selected greenspaces opposed to an in-person-real world assessment which could garner more nuanced findings.

Existing literature on Melbourne has prioritised distribution, proximity and accessibility domains when assessing inequitable greenspace and, consequently, has catalysed a research gap in greenspace quality. This is also one of the first papers to provide insight into the “Plan Melbourne” policy regarding urban regeneration and ameliorating public open spaces.