Search results

Brief introduction on the importance and the need for plastic analysis methods were presented in the beginning section of this review. The plastic method for analysis was considered to be the more advanced method of analysis because of its ability to represent the true behaviour of the steel structures. Then in the following section, a literature analysis has been carried out on the previous investigations done on steel plates, steel beams and steel frames by other authors. The behaviour of them under different types of loading were presented and are under the investigation of innovative new analysis methods.

Structure member connections also have the potential for plastic failure. In this study, the authors have highlighted a few topics to be discussed. The three topics in this study are T-end plate connections to a square hollow section, semi-rigid connections and cold-formed steel storage racks with spine bracings using speed-lock connections. Connection is one of the important parts of a structure that ensures the integrity of the structure. Finally, in this technical paper, the authors introduce some topics related to seismic action. Application of the Theory of Plastic Mechanism Control in seismic design is studied in the beginning. At the end, its in-depth application for moment resisting frames-eccentrically braced frames dual systems is investigated.

When this study involves the design of a plastic structure, the design criteria must involve the ultimate load rather than the yield stress. As the steel behaves in the plastic range, it means the capacity of the steel has reached the ultimate load. Ultimate load design and load factor design are the methods in the range of plastic analysis. After the steel capacity has reached beyond the yield stress, it fulfills the requirement in this method. The plastic analysis method offers a consistent and logical approach to structural analysis. It provides an economical solution in terms of steel weight, as the sections designed using this method are smaller compared with elastic design methods.

The plastic method is the primary approach used in the analysis and design of statically indeterminate frame structures.

Reducing the number of generated mutants by clustering redundant mutants, reducing the execution time by decreasing the number of generated mutants and reducing the cost of mutation testing are the main goals of this study.

In this study, a method is suggested to identify and prone the redundant mutants. In the method, first, the program source code is analyzed by the developed parser to filter out the effectless instructions; then the remaining instructions are mutated by the standard mutation operators. The single-line mutants are partially executed by the developed instruction evaluator. Next, a clustering method is used to group the single-line mutants with the same results. There is only one complete run per cluster.

The results of experiments on the Java benchmarks indicate that the proposed method causes a 53.51 per cent reduction in the number of mutants and a 57.64 per cent time reduction compared to similar experiments in the MuJava and MuClipse tools.

Developing a classifier that takes the source code of the program and classifies the programs' instructions into effective and effectless classes using a dependency graph; filtering out the effectless instructions reduces the total number of mutants generated; Developing and implementing an instruction parser and instruction-level mutant generator for Java programs; the mutant generator takes instruction in the original program as a string and generates its single-line mutants based on the standard mutation operators in MuJava; Developing a stack-based evaluator that takes an instruction (original or mutant) and the test data and evaluates its result without executing the whole program.

This study’s main objective is to explore the ISO 9001 implementation model and identify a future research agenda. This is important because not all organizations find it easy to implement ISO 9001, and not all organizations get positive benefits after implementing it.

The paper presents a comprehensive review of the literature on ISO 9001 implementation models using the preferred reporting items for systematic reviews (PRISMA) methodology to systematically review the existing literature on ISO 9001 implementation models. Relevant studies published from 2003 to early 2023 are explored to reveal the research landscape, gaps and trends.

Many ISO 9001 implementation methods have been developed for actual implementation in organizations, including models, frameworks, special variable considerations, application uses and integration. These methods were developed and applied to cover gaps regarding constraints, unbeneficial, special conditions, implementation objectives and organization types in ISO 9001 implementation. Current issues and future research on ISO 9001 implementation models were found, namely ISO 9001 implementation models specific to SMEs, ISO 9001 implementation levels, ISO 9001 implementation models that are agile to change, and affordable certification models.

Only a few researchers have systematically reviewed the literature or taken a bibliometric approach in their analyses to provide an overview of the current trends and links to ISO 9001 implementation models. The ISO 9001 standard is a general standard and can be applied by all organizations with the implementation method left to the implementer. Many implementation methods have been developed, but several implementation obstacles and disadvantages are still found. It is important to know the extent of current research and discover future research gaps regarding methods of implementing the ISO 9001 standard.

This study aims to increase the novelty of clothing design and fabric texture. The element library that can be used for design is systematically summarized. The element database can also be continuously filled according to the existing logic to realize the diversity of design. Improve the theory of fashion design, expand the designer's design ideas and improve design efficiency. Clear design steps and logic can help students and machines learn the design process and promote the development of intelligent design. And verify the feasibility of the simulation software to assist pleated clothing design.

Firstly, according to the logical framework of origami theory, different innovative designs and combined designs are made for the basic units of hyperbolic paraboloid, and the element library that can be used for design is systematically summarized. This database can also be continuously filled according to the existing logic to realize the diversity of design. Secondly, it summarizes three methods of pleated element filling clothing – uniform filling method, the irregular filling method and geometric addition method – that improve the theory of fashion design, expand the designer's design ideas and improve design efficiency. Clear design steps and logic can help students and machines learn the design process and promote the development of intelligent design. Finally, the virtual software is used to simulate the effect of pleated clothing, and the three-dimensional simulation software 3dclo is used to make an empirical study on the application of hyperbolic paraboloid origami in clothing pleated design to verify the feasibility of the simulation software to assist pleated clothing design.

The theoretical results of hyperbolic paraboloid origami are collected and arranged to establish the element library of hyperbolic paraboloid origami. The results expand the designer's design ideas and auxiliary design technology and improve the design efficiency using a sample of hyperbolic paraboloid fabric to verify its practicability and three-dimensional clothing simulation software for exploring the design. The design rules of hyperbolic paraboloid clothing and the realization method of fabric are summarized, including the expansion and combing of elements, the application of size and shape and the method of combination.

Owing to the hyperbolic paraboloid origami’s length shrinkage, the loose computation of clothing requires targeted computation. This paper solely applies a paper model for estimating the shrinkage, and then we tend to subsequently explore the way to precisely compute the porosity, to determine the existing differences in the two-dimensional shrinkage of hyperbolic paraboloid creases of varying materials and to know if the clothing after large-scale production is capable of reaching the anticipated value.

The exploration of this experiment brings a new 3D experiment process to the design process.

This experiment brings new possibilities for the development of virtual fitting and virtual display in the industry.

This study combines hyperbolic paraboloid origami and clothing and combs and expands the unit with logical thinking to expand the designer's design ideas.

This paper aims to propose a new method to derive custom dynamic cyber risk metrics based on the well-known Goal, Question, Metric (GQM) approach. A framework that complements it and makes it much easier to use has been proposed too. Both, the method and the framework, have been validated within two challenging application domains: continuous risk assessment within a smart farm and risk-based adaptive security to reconfigure a Web application firewall.

The authors have identified a problem and provided motivation. They have developed their theory and engineered a new method and a framework to complement it. They have demonstrated the proposed method and framework work, validating them in two real use cases.

The GQM method, often applied within the software quality field, is a good basis for proposing a method to define new tailored cyber risk metrics that meet the requirements of current application domains. A comprehensive framework that formalises possible goals and questions translated to potential measurements can greatly facilitate the use of this method.

The proposed method enables the application of the GQM approach to cyber risk measurement. The proposed framework allows new cyber risk metrics to be inferred by choosing between suggested goals and questions and measuring the relevant elements of probability and impact. The authors’ approach demonstrates to be generic and flexible enough to allow very different organisations with heterogeneous requirements to derive tailored metrics useful for their particular risk management processes.

The purpose of this paper is to construct an event-triggered finite-time fault-tolerant formation tracking controller, which can achieve a time-varying formation control for multiple unmanned aerial vehicles (UAVs) during actuator failures and external perturbations.

First, this study developed the formation tracking protocol for each follower using UAV formation members, defining the tracking inaccuracy of the UAV followers’ location. Subsequently, this study designed the multilayer event-triggered controller based on the backstepping method framework within finite time. Then, considering the actuator failures, and added self-adaptive thought for fault-tolerant control within finite time, the event-triggered closed-loop system is subsequently shown to be a finite-time stable system. Furthermore, the Zeno behavior is analyzed to prevent infinite triggering instances within a finite time. Finally, simulations are conducted with external disturbances and actuator failure conditions to demonstrate formation tracking controller performance.

It achieves improved performance in the presence of external disturbances and system failures. Combining limited-time adaptive control and event triggering improves system stability, increase robustness to disturbances and calculation efficiency. In addition, the designed formation tracking controller can effectively control the time-varying formation of the leader and followers to complete the task, and by adding a fixed-time observer, it can effectively compensate for external disturbances and improve formation control accuracy.

A formation-following controller is designed, which can handle both external disturbances and internal actuator failures during formation flight, and the proposed method can be applied to a variety of formation control scenarios and does not rely on a specific type of UAV or communication network.

The study aims to investigate the impact of indirectly evoked incentives, in the form of supervisor’s preferences, on the decision about accounting policy regarding depreciation method selection and to examine subsequent post-decision distortion by evaluating the depreciation method.

The authors conducted two experiments with control and treatment groups, manipulating the supervisor’s indirectly evoked preferences. In Study 2, the authors also measured the evaluation of both depreciation methods to investigate post-decisional distortion regarding the assessment of the depreciation method chosen in a decision task. Study 1 was conducted among 85 accounting students, while Study 2 consisted of 200 accountants.

Both studies revealed the significant impact of supervisor’s indirectly evoked preferences on accounting policy decisions. Participants who were aware of supervisors’ preferences were more likely to choose the depreciation method that was consistent with those preferences. The authors also found that those participants attached a higher value to the depreciation method, providing evidence that adherence to the supervisor’s preferences results in a distorted assessment of the depreciation methods.

First, this study shows that indirectly evoked supervisors’ preferences may lead to a departure from substantive criteria resulting in low-quality accounting outcomes. Second, the assessment of the depreciation method is inseparable from the situational context, as the evaluation of the depreciation method is interdependent upon the preferences of the choice of a depreciation method and the fulfillment of those preferences.

Prefabricated products are continually entering the building construction market; yet, the decision to use prefabricated products in a construction project is based mostly on personal preferences and the evaluation of direct costs. Researchers and practitioners have debated appropriate measurement systems for evaluating the impacts of prefabricated products and for comparing them with conventional on-site construction practices. The more advanced, cost–benefit approach to evaluating prefabricated products often inspires controversy because it may generate inaccurate results when converting non-monetary effects into costs. As prefabrication may affect multiple organisations and product subsystems, the method used to decide on production methods should consider multiple direct and indirect impacts, including nonmonetary ones. Thus, this study aims to develop a multi-criteria method to evaluate both the monetary and non-monetary impacts of prefabrication solutions to facilitate decision-making on whether to use prefabricated products.

Drawing upon a literature review, this research suggests a multi-criteria method that combines the choosing-by-advantage approach with a cost–benefit analysis. The method was presented for validation in focus group discussions and tested in a case involving a prefabricated bathroom.

The analysis indicates that the method helps a project’s stakeholders communicate about the relative merits of prefabrication and conventional construction while facilitating the final decision of whether to use prefabrication.

This research contributes a method of evaluating the monetary and non-monetary impacts of prefabricated products. The research underlines the need to evaluate the diverse benefits and sacrifices that stakeholder face when considering production methods in construction.

Cotton fibre lots are graded and selected for yarn spinning based on their quality value which is a function of certain fibre properties. Cotton grading and selection has created a domain of emerging interest among the researchers. Several researchers have addressed the said issue using a few exponents of multi-criteria decision-making (MCDM) technique. The purpose of this study is to demonstrate a cotton selection problem using a recently developed measurement of alternatives and ranking according to compromise solution (MARCOS) method which can handle almost any decision problem involving a finite number of alternatives and multiple conflicting decision criteria.

The MARCOS method of the MCDM technique was deployed in this study to rank 17 cotton fibre lots based on their quality values. Six apposite fibre properties, namely, fibre bundle strength, elongation, fineness, upper half mean length, uniformity index and short fibre content are considered as the six decision criteria assigning weights previously determined by an earlier researcher using analytic hierarchy process.

Among the 17 alternatives, C9 secured rank 1 (the best lot) with the highest utility function (0.704) and C7 occupied rank 17 (the worst lot) with the lowest utility function (0.596). Ranking given by MARCOS method showed high degree of congruence with the earlier approaches, as evidenced by high rank correlation coefficients (Rs > 0.814). During sensitivity analyses, no occurrence of rank reversal is observed. The correlations between the quality value-based ranking and the yarn tenacity-based rankings are better than many of the traditional methods. The results can be improved further by adopting other efficient method of weighting the criteria.

The properties of raw cotton have significant impact on the quality of final yarn. Compared to the traditional methods, MCDM is reported as the most viable solution in which fibre parameters are given their due importance while formulating a single index known as quality value. The present study demonstrates the application of a recently developed exponent of MCDM in the name of MARCOS for the first time to address a cotton fibre selection problem for textile spinning mills. The same approach can also be extended to solve other decision problems of the textile industry, in general.

Novelty of the present study lies in the fact that the MARCOS is a very recently developed MCDM method, and this is a maiden application of the MARCOS method in the domain of textile, in general, and cotton industry, in particular. The approach is very simple, highly effective and quite flexible in terms of number of alternatives and decision criteria, although highly robust and stable.

This study aims to identify significant factors, analyse them using the consistent fuzzy preference relations (CFPR) method and forecast the probability of successful deployment of the internet of things (IoT) and cloud computing (CC) in Gujarat, India’s building sector.

From the previous studies, 25 significant factors were identified, and a questionnaire survey with personal interviews obtained 120 responses from building experts in Gujarat, India. The questionnaire survey data’s validity, reliability and descriptive statistics were also assessed. Building experts’ opinions are inputted into the CFPR method, and priority weights and ratings for probable outcomes are obtained to forecast success and failure.

The findings demonstrate that the most important factors are affordable system and ease of use and battery life and size of sensors, whereas less important ones include poor collaboration between IoT and cloud developer community and building sector and suitable location. The forecasting values demonstrate that the factor suitable location has a high probability of success; however, factors such as loss of jobs and data governance have a high probability of failure. Based on the forecasted values, the probability of success (0.6420) is almost twice that of failure (0.3580). It shows that deploying IoT and CC in the building sector of Gujarat, India, is very much feasible.

Previous studies analysed IoT and CC factors using different multi-criteria decision-making (MCDM) methods to merely prioritise ranking in the building sector, but forecasting success/failure makes this study unique. This research is generally applicable, and its findings may be utilised for decision-making and deployment of IoT and CC in the building sector anywhere globally.