Search results

Stand-up meetings have received attention for their functional effectiveness in the workplace, but they can also cause affective reactions among attendees. These reactions can affect workplace attitudes and alter the way that employees view and perform their work to the benefit or detriment of the organization.

Following the tenets of the job characteristics model (JCM), a study was conducted on relevant stand-up meetings' effects on beliefs about the meaningfulness of one's work and subsequent motivation. Further analysis explored the effects that meeting load (i.e. the number of meetings) has on the outcomes of meetings.

Consistent with hypotheses, stand-up meeting relevance has an indirect effect on work motivation through work meaningfulness. Meeting load moderates both the indirect effect, such that the effect is stronger at higher numbers of meetings, and the direct effect on work meaningfulness in the opposite direction, as the effect is strongest with fewer meetings.

Organizations should ensure that stand-up meetings are relevant to all attendees and hold the meetings at an appropriate regularity for the best outcomes.

This work examined the stand-up meeting. Most prior meetings research has focused on meetings as a whole or other subtypes and examine meeting relevance and contribution to employee motivation through the lens of JCM.

Sustainable urban rail transit requires noise barriers. However, these barriers’ durability varies due to the differing aerodynamic impacts they experience. The purpose of this paper is to investigate the aerodynamic discrepancies of trains when they meet within two types of rectangular noise barriers: fully enclosed (FERNB) and semi-enclosed with vertical plates (SERNBVB). The research also considers the sensitivity of the scale ratio in these scenarios.

A 1:16 scaled moving model test analyzed spatiotemporal patterns and discrepancies in aerodynamic pressures during train meetings. Three-dimensional computational fluid dynamics models, with scale ratios of 1:1, 1:8 and 1:16, used the improved delayed detached eddy simulation turbulence model and slip grid technique. Comparing scale ratios on aerodynamic pressure discrepancies between the two types of noise barriers and revealing the flow field mechanism were done. The goal is to establish the relationship between aerodynamic pressure at scale and in full scale.

The aerodynamic pressure on SERNBVB is influenced by the train’s head and tail waves, whereas for FERNB, it is affected by pressure wave and head-tail waves. Notably, SERNBVB's aerodynamic pressure is more sensitive to changes in scale ratio. As the scale ratio decreases, the aerodynamic pressure on the noise barrier gradually increases.

A train-meeting moving model test is conducted within the noise barrier. Comparison of aerodynamic discrepancies during train meets between two types of rectangular noise barriers and the relationship between the scale and the full scale are established considering the modeling scale ratio.

Small retail stores in the luxury market face significant challenges due to fluctuations in market demand. This task turns challenging as it requires effectively coordinating and translating customer needs into specific requirements that align with retail goals and available resources. However, limited empirical research exists investigating how managers can address service value and quality attributes in small retail stores. This article aims to bridge this gap by investigating the role of quality function deployment (QFD) in improving market and quality requirements management in small retail stores.

Based on the case study, a customer survey was initially conducted to gather information on critical characteristics valued in the luxury retail segment. QFD was used to assist the company in identifying and prioritizing key quality attributes to meet customer requirements effectively.

The findings demonstrate that implementing QFD in small luxury retail stores empowers managers to identify previously neglected product and service quality aspects. The article shows that QFD informs organizational adaptations that align with the demands of the retail market, leading to an improved ability to meet customer expectations and enhance customer value through the development of enhanced products and services. The study showcases the efficacy of the tested methodology in effectively capturing and prioritizing both tangible and intangible customer needs in retail.

Findings offer valuable insights to retail managers of small luxury stores, providing actionable market-oriented strategies. By implementing the recommended practices, managers can improve the store’s competitiveness and better cater to the customer base.

This study contributes to bridging persistent knowledge gaps by addressing the unique context of small luxury retail stores and introducing the application of QFD in this setting. The insights gained from this research are relevant to both retailing and quality management literature. Considering the growing prevalence of transformations in the retail industry, the study provides practical implications for retail managers in effectively navigating these changes.

Farmers in developing countries are used to recycling and purchasing seeds of old and low-yielding varieties, leading to low seed and varietal replacement rates. Seed companies in Nepal have started to conduct traders' meetings (TMs) to promote new rice varieties. This paper aims to assess the effectiveness of this approach in promoting new rice varieties.

The authors assess the effectiveness of TMs by surveying 238 agrodealers from 7 districts of Nepal. The authors used the binary logit model to study the determinants of participation in TM and an instrumental variable approach to estimate the impact of TMs on sales of the promoted rice varieties.

Results indicate that the TM significantly influences traders' knowledge and increases the probability of selling new rice varieties promoted. However, TMs did not significantly increase the overall sales of promoted rice varieties.

The study is based on cross-section data; thus, unobserved fixed effects could not be accounted for. The study finds only one relevant and valid instrumental variable and therefore could not conduct any exogeneity test.

Seed companies in Nepal started to conduct TMs to promote new rice varieties since 2019. However, to the best of the authors’ knowledge, the usefulness of TMs and the impact of these events in changing traders' attitudes toward domestic rice seed varieties or in business performance (annual sales of the promoted varieties) have not been assessed. Therefore, the study findings will help to promote the market-driven seed system and increase the seed replacement rate.

Understanding group dynamics is essential for promoting institutional change. The purpose of this brief article is to introduce the use of Yule’s Q to quantify group dynamics in a way that allows an individual’s tendency to associate with others based on their shared attributes to be captured as they evolve.

Two academic departments at a large public urban university participated in ongoing meetings as part of the year-long change initiative. Field notes of these meetings were recorded for information on participants and the flow of conversations. Yule’s Q was calculated with responsive interaction network and attribute data coded from the field notes.

Yule’s Q can be used to quantify group dynamics with a visualization of interactions among group members. The differences in the triggered divisions or faultlines in organizational change initiatives by shared common attributes (e.g. levels of positions within departments) can be related to group interactions and/or disruptions in collaboration.

This study can contribute to broadening the research community’s analytic approaches to utilizing network and attribute data for understanding group dynamics and their patterns across meetings.

As sustainability becomes more important in manufacturing, researchers recommend using the four-stage Hayes and Wheelwright (H-W) model of strategic manufacturing effectiveness (SME) to integrate sustainable manufacturing practices (SMPs) at a strategic level. However, there is limited research on this topic. This paper investigates SMPs encompassing four sustainable manufacturing capabilities (SMCs): pollution control, pollution prevention, product stewardship, and clean technology. It relates these SMCs to the four SME stages of the H-W model, both of which form a continuum of stages.

A theoretical model on the congruence between SMCs and SME stages is first established using organizational theories to identify the dominant combinations. This model is then tested by examining 178 SMPs of four large manufacturing firms.

The study reveals that the SMPs of the case firms clearly show SMC and SME stage characteristics. Few deviations from the relationships established in the theoretical model are observed, leading to a revision of the model. A major finding is that SMPs within an SMC category can span multiple SME stages.

The study proposes a revised model based on a small sample of case firms, which may limit its broader applicability.

Manufacturing practitioners can use the findings of this study to plan SMPs that align with their SME goals.

Towards incorporating sustainability in the H-W model, this is the first major exploratory study that establishes congruent relationship between SMCs and SME stages of the H-W model.

Based on the principles of positive psychology, this study aims to investigate the mediating role of job characteristics (task, knowledge, social and work context) in the connection between lean manufacturing (LM) practices and employee well-being.

Employee well-being, encompassing job satisfaction, organizational affective commitment and work involvement, is conceptualized as a second-order construct. Using a proposed model, an online survey was administered to 520 participants across 23 operational sectors categories of the Brazilian manufacturing industry. The data is processed using structural equation analysis.

The research shows that the relationship between LM practices and employee well-being is partially mediated through three out of the four work characteristics (task, knowledge and social). In addition, LM exerts a direct and significant influence on employee well-being.

This study contributes to practical insights by encouraging industrial managers to refine their managerial work design. It highlights the importance of appropriately dimensioning tasks, nurturing social skills to enhance interactions and task execution and optimizing physical facilities to counteract potential initial-stage work intensification during LM implementation.

Previous research about organizational behavior extensively examines happiness at work, focusing on constructs such as well-being, satisfaction, commitment, engagement and motivation, but there is a lack of studies assessing employee well-being in the lean context, particularly from a positive perspective.

This study explores the spatial adaptive changes to different ancestral origins of Korean vernacular houses in Northeastern China and discusses the influence of changing family patterns on spatial capacity.

This study uses quantitative and comparative methods to explore changes to space arrangement, space area, and furniture forms in Korean vernacular houses. This study also explores the correlation between changes in family patterns and the changing characteristics of spatial capacity.

The results elucidate the changing characteristics of Korean houses' spatial capacity. While the changing individual needs of Korean family members have led to increased spatial accessibility, there is a weak correlation variability in remodelling outcomes and changes in individual needs. Moreover, the per capita living area of Korean vernacular houses has increased, and furniture forms tend to be simpler, smaller, and more integrated. These developments reflect the changes in the way of life, production, and family structure.

This study provides a unique perspective on the sociology and architecture of ethnic minority families in China. Its results can help architects and construction firms more intuitively understand Korean houses. This study also provides a reference for the future renewal of Korean houses in the region.

Although a growing number of studies have examined Korean vernacular houses and family patterns, none have explored the impact of changing family patterns on the spatial organisation of different ancestral origins of Korean vernacular houses. Therefore, this novel study addresses this gap, enriching the literature and providing practical insights.

This study aims to explore natural resources from a public sector accounting perspective, focusing on their definitions, classifications, recognition criteria and disclosure requirements provided by different standard-setters and regulators at both international and national levels.

By reviewing accounting frameworks for natural resources, this study extrapolates accounting dilemmas around the debate on natural resource accounting, using the dialogic accounting perspective as a theoretical framework.

Natural resources cannot be defined as a single category. Various categories have different characteristics, requiring different standards to recognize multiple orientations. This avoids monetary reductionism. Furthermore, uncertainty, both in existence and measurement, may disqualify some of these resources from being considered assets. Perhaps, concentrating on the flow of services derived from natural resources is better than focusing on their valuation. This may lead to a split-asset approach (flows and underlying assets) for certain resources. This study’s findings indicate that public-sector entities should consider preparing a separate non-financial report regarding the management of natural resources with the objective of maintaining inter-generational equity.

This study contributes to the debate on natural resources from an accounting and reporting perspective, highlighting the importance of holding public-sector entities accountable for the use of natural resources.

A wide gap exists between the innovation and development of self-monitoring, analysis and reporting technology (SMART) technologies and the actual adoption by older adults or those caring for them. This paper aims to increase awareness of available technologies and describes their suitability for older adults with different needs. SMART technologies are intelligent devices and systems that enable autonomous monitoring of their status, data analysis or direct feedback provision.

This is a scoping review of SMART technologies used and marketed to older adults or for providing care.

Five categories of SMART technologies were identified: (1) wearable technologies and smart tools of daily living; (2) noninvasive/unobtrusive technology (i.e. passive technologies monitoring the environment, health and behavior); (3) complex SMART systems; (4) interactive technologies; (5) assistive and rehabilitation devices. Technologies were then linked with needs related to everyday practical tasks (mainly applications supporting autonomous, independent living), social and emotional support, health monitoring/managing and compensatory assistance rehabilitation.

When developing, testing or implementing technologies for older adults, researchers should clearly identify concrete needs these technologies help meet to underscore their usefulness.

Older adults and caregivers should weigh the pros and cons of different technologies and consider the key needs of older adults before investing in any tech solution.

SMART technologies meeting older adult needs help support both independent, autonomous life for as long as possible as well as aiding in the transition to assisted or institutionalized care.

This is the first review to explicitly link existing SMART technologies with the concrete needs of older adults, serving as a useful guide for both older adults and caregivers in terms of available technology solutions.