Search results

The purpose of this paper is to improve the tactical planning of the stakeholders of the midstream liquefied natural gas (LNG) supply chain, using an optimisation approach. The results can contribute to enhance the proactivity on significant investment decisions.

A decision support tool (DST) is proposed to minimise the operational cost of a fleet of vessels. Mixed integer linear programming (MILP) used to perform contract assignment combined with a genetic algorithm solution are the foundations of the DST. The aforementioned methods present a formulation of the maritime transportation problem from the scope of tramp shipping companies.

The validation of the DST through a realistic case study illustrates its potential in generating quantitative data about the cost of the midstream LNG supply chain and the annual operations schedule for a fleet of LNG vessels.

The LNG transportation scenarios included assumptions, which were required for resource reasons, such as omission of stochasticity. Notwithstanding the assumptions made, it is to the authors’ belief that the paper meets its objectives as described above.

Potential practitioners may exploit the results to make informed decisions on the operation of LNG vessels, charter rate quotes and/or redeployment of existing fleet.

The research has a novel approach as it combines the creation of practical management tool, with a comprehensive mathematical modelling, for the midstream LNG supply chain. Quantifying future fleet costs is an alternative approach, which may improve the planning procedure of a tramp shipping company.

The purpose of this paper is to present a Design for Additive Manufacturing (DfAM) methodology that connects several methods, from geometrical design to post-process selection, into a common optimisation framework.

A design methodology is formulated and tested in a case study. The outcome of the case study is analysed by comparing the obtained results with alternative designs achieved by using other design methods. The design process in the case study and the potential of the method to be used in different settings are also discussed. Finally, the work is concluded by stating the main contribution of the paper and highlighting where further research is needed.

The proposed method is implemented in a novel framework which is applied to a physical component in the case study. The component is a structural aircraft part that was designed to minimise weight while respecting several static and fatigue structural load cases. An addition goal is to minimise the manufacturing cost. Designs optimised for manufacturing by two different AM machines (EOS M400 and Arcam Q20+), with and without post-processing (centrifugal finishing) are considered. The designs achieved in this study show a significant reduction in both weight and cost compared to one AM manufactured geometry designed using more conventional methods and one design milled in aluminium.

The method in this paper allows for the holistic design and optimisation of components while considering manufacturability, cost and component functionality. Within the same framework, designs optimised for different setups of AM machines and post-processing can be automatically evaluated without any additional manual work.

The International Maritime Organization has decided that as of 1.1.2020, SOx content in a ship’s emissions should be no more than 0.5 per cent. The purpose of this paper is to address the various challenges expected to arise from the enforcement of the global cap sulfur regulation.

The authors outline various enforcement options and present a model that calculates the profits from noncompliance in the high seas, so as to help determine the level of fines that could be imposed in case of violation.

The main finding is that a harmonized system of fines, which are more than potential savings from cheating, would be a strong deterrent for compliance.

To the authors’ knowledge, no paper in the maritime literature on sulfur regulations has focused on enforcement as of yet.

The purpose of this paper is to present the status of the on-going development of the new computerized environment for aircraft synthesis and integrated optimization methods (CEASIOM) and to compare results of different aerodynamic tools. The concurrent design of aircraft is an extremely interdisciplinary activity incorporating simultaneous consideration of complex, tightly coupled systems, functions and requirements. The design task is to achieve an optimal integration of all components into an efficient, robust and reliable aircraft with high performance that can be manufactured with low technical and financial risks, and has an affordable life-cycle cost.

CEASIOM (www.ceasiom.com) is a framework that integrates discipline-specific tools like computer-aided design, mesh generation, computational fluid dynamics (CFD), stability and control analysis and structural analysis, all for the purpose of aircraft conceptual design.

A new CEASIOM version is under development within EU Project AGILE (www.agile-project.eu), by adopting the CPACS XML data-format for representation of all design data pertaining to the aircraft under development.

Results obtained from different methods have been compared and analyzed. Some differences have been observed; however, they are mainly due to the different physical modelizations that are used by each of these methods.

This paper summarizes the current status of the development of the new CEASIOM software, in particular for the following modules: CPACS file visualizer and editor CPACSupdater (Matlab) Automatic unstructured (Euler) & hybrid (RANS) mesh generation by sumo Multi-fidelity CFD solvers: Digital Datcom (Empirical), Tornado (VLM), Edge-Euler & SU2-Euler, Edge-RANS & SU2-RANS Data fusion tool: aerodynamic coefficients fusion from variable fidelity CFD tools above to compile complete aero-table for flight analysis and simulation.

This paper aims to review recent research in design for additive manufacturing (DfAM), including additive manufacturing (AM) terminology, trends, methods, classification of DfAM methods and software. The focus is on the design engineer’s role in the DfAM process and includes which design methods and tools exist to aid the design process. This includes methods, guidelines and software to achieve design optimization and in further steps to increase the level of design automation for metal AM techniques. The research has a special interest in structural optimization and the coupling between topology optimization and AM.

The method used in the review consists of six rounds in which literature was sequentially collected, sorted and removed. Full presentation of the method used could be found in the paper.

Existing DfAM research has been divided into three main groups – component, part and process design – and based on the review of existing DfAM methods, a proposal for a DfAM process has been compiled. Design support suitable for use by design engineers is linked to each step in the compiled DfAM process. Finally, the review suggests a possible new DfAM process that allows a higher degree of design automation than today’s process. Furthermore, research areas that need to be further developed to achieve this framework are pointed out.

The review maps existing research in design for additive manufacturing and compiles a proposed design method. For each step in the proposed method, existing methods and software are coupled. This type of overall methodology with connecting methods and software did not exist before. The work also contributes with a discussion regarding future design process and automation.

This paper aims to examine containership routing and speed optimization for maritime liner services. It focuses on a realistic case in which the transport demand, and consequently the collected revenue from the visited ports depend on the sailing speed.

The authors present an integer non-linear programming model for the containership routing and fleet sizing problem, in which the sailing speed of every leg, the ports to be included in the service and their sequence are optimized based on the net line's profit. The authors present a heuristic approach that is based on speed discretization and a genetic algorithm to solve the problem for large size instances. They present an application on a line provided by COSCO in 2017 between Asia and Europe.

The numerical results show that the proposed heuristic approach provides good quality solutions after a reasonable computation time. In addition, the demand sensitivity has a great impact on the selected route and therefore the profit function. Moreover, the more the demand is sensitive to the sailing speed, the higher the sailing speed value.

The vessel carrying capacity is not considered in an explicit way.

This paper focuses on an important aspect in liner shipping, i.e. demand sensitivity to sailing speed. It brings a novel approach that is important in a context in which sailing speed strategies and market volatility are to be considered together in network design. This perspective has not been addressed previously.

The article investigates factors associated with the relative success in adopting two specific alternative marine energies (liquefied natural gas [LNG] and electric batteries) in the Norwegian ferry market. This specific market segment is an interesting case study as its national-flagged fleet boasting the largest number of ships using alternative marine energies in comparison with the other countries of the region and the world.

A database tracking the yearly deployment of ships using a different combination of LNG and electric batteries was built from shipping lines’ online information and grey literature. The technological adoption approach was used to categorize different groups of users at each step of the adoption process and identify which factors separate the early adopters from the other groups of end-users. The compiled data allow tracing the changing distribution of Norwegian ferry operators along the conceptualized technology adoption curve.

Results indicated that the Norwegian ferry market matches required conditions to pass the “chasm” of uncertainties associated with transitioning to new technology. Some disparities between the adoption of LNG and the electric batteries in the Norwegian ferry markets are observed.

To the authors’ knowledge, no study has explored the adoption of new energies in the maritime industry based on the technology adoption process through a similar perspective. The analysis is helpful to shed light on the barriers associated with a high level of uncertainties when it comes to adopting new marine energies.