Search results

To provide high torques needed to move a robot’s links, electric actuators are followed by a transmission system with a high transmission rate. For instance, gear ratios of 100:1 are often used in the joints of a robotic manipulator. This results into an actuator with large mechanical impedance (also known as nonback-drivable actuator). This in turn generates high contact forces when collision of the robotic mechanism occur and can cause humans’ injury. Another disadvantage of electric actuators is that they can exhibit overheating when constant torques have to be provided. Comparing to electric actuators, pneumatic actuators have promising properties for robotic applications, due to their low weight, simple mechanical design, low cost and good power-to-weight ratio. Electropneumatically actuated robots usually have better friction properties. Moreover, because of low mechanical impedance, pneumatic robots can provide moderate interaction forces which is important for robotic surgery and rehabilitation tasks. Pneumatic actuators are also well suited for exoskeleton robots. Actuation in exoskeletons should have a fast and accurate response. While electric motors come against high mechanical impedance and the risk of causing injuries, pneumatic actuators exhibit forces and torques which stay within moderate variation ranges. Besides, unlike direct current electric motors, pneumatic actuators have an improved weight-to-power ratio and avoid overheating problems.

The aim of this paper is to analyze a nonlinear optimal control method for electropneumatically actuated robots. A two-link robotic exoskeleton with electropneumatic actuators is considered as a case study. The associated nonlinear and multivariable state-space model is formulated and its differential flatness properties are proven. The dynamic model of the electropneumatic robot is linearized at each sampling instance with the use of first-order Taylor series expansion and through the computation of the associated Jacobian matrices. Within each sampling period, the time-varying linearization point is defined by the present value of the robot’s state vector and by the last sampled value of the control inputs vector. An H-infinity controller is designed for the linearized model of the robot aiming at solving the related optimal control problem under model uncertainties and external perturbations. An algebraic Riccati equation is solved at each time-step of the control method to obtain the stabilizing feedback gains of the H-infinity controller. Through Lyapunov stability analysis, it is proven that the robot’s control scheme satisfies the H-infinity tracking performance conditions which indicate the robustness properties of the control method. Moreover, global asymptotic stability is proven for the control loop. The method achieves fast convergence of the robot’s state variables to the associated reference trajectories, and despite strong nonlinearities in the robot’s dynamics, it keeps moderate the variations of the control inputs.

In this paper, a novel solution has been proposed for the nonlinear optimal control problem of robotic exoskeletons with electropneumatic actuators. As a case study, the dynamic model of a two-link lower-limb robotic exoskeleton with electropneumatic actuators has been considered. The dynamic model of this robotic system undergoes first approximate linearization at each iteration of the control algorithm around a temporary operating point. Within each sampling period, this linearization point is defined by the present value of the robot’s state vector and by the last sampled value of the control inputs vector. The linearization process relies on first-order Taylor series expansion and on the computation of the associated Jacobian matrices. The modeling error which is due to the truncation of higher-order terms from the Taylor series is considered to be a perturbation which is asymptotically compensated by the robustness of the control algorithm. To stabilize the dynamics of the electropneumatically actuated robot and to achieve precise tracking of reference setpoints, an H-infinity (optimal) feedback controller is designed. Actually, the proposed H-infinity controller for the model of the two-link electropneumatically actuated exoskeleton achieves the solution of the associated optimal control problem under model uncertainty and external disturbances. This controller implements a min-max differential game taking place between: (i) the control inputs which try to minimize a cost function which comprises a quadratic term of the state vector’s tracking error and (ii) the model uncertainty and perturbation inputs which try to maximize this cost function. To select the stabilizing feedback gains of this H-infinity controller, an algebraic Riccati equation is being repetitively solved at each time-step of the control method. The global stability properties of the H-infinity control scheme are proven through Lyapunov analysis.

Pneumatic actuators are characterized by high nonlinearities which are due to air compressibility, thermodynamics and valves behavior and thus pneumatic robots require elaborated nonlinear control schemes to ensure their fast and precise positioning. Among the control methods which have been applied to pneumatic robots, one can distinguish differential geometric approaches (Lie algebra-based control, differential flatness theory-based control, nonlinear model predictive control [NMPC], sliding-mode control, backstepping control and multiple models-based fuzzy control). Treating nonlinearities and fault tolerance issues in the control problem of robotic manipulators with electropneumatic actuators has been a nontrivial task.

The novelty of the proposed control method is outlined as follows: preceding results on the use of H-infinity control to nonlinear dynamical systems were limited to the case of affine-in-the-input systems with drift-only dynamics. These results considered that the control inputs gain matrix is not dependent on the values of the system’s state vector. Moreover, in these approaches the linearization was performed around points of the desirable trajectory, whereas in the present paper’s control method the linearization points are related with the value of the state vector at each sampling instance as well as with the last sampled value of the control inputs vector. The Riccati equation which has been proposed for computing the feedback gains of the controller is novel, so is the presented global stability proof through Lyapunov analysis. This paper’s scientific contribution is summarized as follows: (i) the presented nonlinear optimal control method has improved or equally satisfactory performance when compared against other nonlinear control schemes that one can consider for the dynamic model of robots with electropneumatic actuators (such as Lie algebra-based control, differential flatness theory-based control, nonlinear model-based predictive control, sliding-mode control and backstepping control), (ii) it achieves fast and accurate tracking of all reference setpoints, (iii) despite strong nonlinearities in the dynamic model of the robot, it keeps moderate the variations of the control inputs and (iv) unlike the aforementioned alternative control approaches, this paper’s method is the only one that achieves solution of the optimal control problem for electropneumatic robots.

The use of electropneumatic actuation in robots exhibits certain advantages. These can be the improved weight-to-power ratio, the lower mechanical impedance and the avoidance of overheating. At the same time, precise positioning and accurate execution of tasks by electropneumatic robots requires the application of elaborated nonlinear control methods. In this paper, a new nonlinear optimal control method has been developed for electropneumatically actuated robots and has been specifically applied to the dynamic model of a two-link robotic exoskeleton. The benefit from using this paper’s results in industrial and biomedical applications is apparent.

A comparison of the proposed nonlinear optimal (H-infinity) control method against other linear and nonlinear control schemes for electropneumatically actuated robots shows the following: (1) Unlike global linearization-based control approaches, such as Lie algebra-based control and differential flatness theory-based control, the optimal control approach does not rely on complicated transformations (diffeomorphisms) of the system’s state variables. Besides, the computed control inputs are applied directly on the initial nonlinear model of the electropneumatic robot and not on its linearized equivalent. The inverse transformations which are met in global linearization-based control are avoided and consequently one does not come against the related singularity problems. (2) Unlike model predictive control (MPC) and NMPC, the proposed control method is of proven global stability. It is known that MPC is a linear control approach that if applied to the nonlinear dynamics of the electropneumatic robot, the stability of the control loop will be lost. Besides, in NMPC the convergence of its iterative search for an optimum depends on initialization and parameter values selection and consequently the global stability of this control method cannot be always assured. (3) Unlike sliding-mode control and backstepping control, the proposed optimal control method does not require the state-space description of the system to be found in a specific form. About sliding-mode control, it is known that when the controlled system is not found in the input-output linearized form the definition of the sliding surface can be an intuitive procedure. About backstepping control, it is known that it cannot be directly applied to a dynamical system if the related state-space model is not found in the triangular (backstepping integral) form. (4) Unlike PID control, the proposed nonlinear optimal control method is of proven global stability, the selection of the controller’s parameters does not rely on a heuristic tuning procedure, and the stability of the control loop is assured in the case of changes of operating points. (5) Unlike multiple local models-based control, the nonlinear optimal control method uses only one linearization point and needs the solution of only one Riccati equation so as to compute the stabilizing feedback gains of the controller. Consequently, in terms of computation load the proposed control method for the electropneumatic actuator’s dynamics is much more efficient.

This study aims to provide a comprehensive analysis of various approaches to the residential property market evolution modelling and to examine the macroeconomic fundamentals that have shaped this market development in Ukraine in recent years.

The study uses a comprehensive data set encompassing relevant macroeconomic indicators and historical apartment prices. Multifactor linear regression (MLR) and ridge regression (RR) models are constructed to identify the impact of multiple predictors on apartment prices. Additionally, the ARIMAX model integrates time series analysis and external factors to enhance modelling and forecasting accuracy.

The investigation reveals that MLR and RR yield accurate predictions by considering a range of influential variables. The hybrid ARIMAX model further enhances predictive performance by fusing external indicators with time series analysis. These findings underscore the effectiveness of a multidimensional approach in capturing the complexity of housing price dynamics.

This research contributes to the real estate modelling and forecasting literature by providing an analysis of multiple linear regression, RR and ARIMAX models within the specific context of property price prediction in the turbulent Ukrainian real estate market. This comprehensive analysis not only offers insights into the performance of these methodologies but also explores their adaptability and robustness in a market characterized by evolving dynamics, including the significant influence of external geopolitical factors.

Brief introduction on the importance and the need for plastic analysis methods were presented in the beginning section of this review. The plastic method for analysis was considered to be the more advanced method of analysis because of its ability to represent the true behaviour of the steel structures. Then in the following section, a literature analysis has been carried out on the previous investigations done on steel plates, steel beams and steel frames by other authors. The behaviour of them under different types of loading were presented and are under the investigation of innovative new analysis methods.

Structure member connections also have the potential for plastic failure. In this study, the authors have highlighted a few topics to be discussed. The three topics in this study are T-end plate connections to a square hollow section, semi-rigid connections and cold-formed steel storage racks with spine bracings using speed-lock connections. Connection is one of the important parts of a structure that ensures the integrity of the structure. Finally, in this technical paper, the authors introduce some topics related to seismic action. Application of the Theory of Plastic Mechanism Control in seismic design is studied in the beginning. At the end, its in-depth application for moment resisting frames-eccentrically braced frames dual systems is investigated.

When this study involves the design of a plastic structure, the design criteria must involve the ultimate load rather than the yield stress. As the steel behaves in the plastic range, it means the capacity of the steel has reached the ultimate load. Ultimate load design and load factor design are the methods in the range of plastic analysis. After the steel capacity has reached beyond the yield stress, it fulfills the requirement in this method. The plastic analysis method offers a consistent and logical approach to structural analysis. It provides an economical solution in terms of steel weight, as the sections designed using this method are smaller compared with elastic design methods.

The plastic method is the primary approach used in the analysis and design of statically indeterminate frame structures.

This paper investigates the relationship between the sustainable finance disclosure regulation (SFDR) and the performance of unlisted real estate funds.

While existing literature has primarily focused on the impact of voluntary sustainability disclosure, such as certifications or reporting standards, this study addresses a significant research gap by constructing and analyzing the financial J-Curve of 40 funds under the SFDR. The authors employ a panel regression analysis to examine the effects of different SFDR categories on fund performance.

The findings reveal that funds categorized under Article 8 of the SFDR do not exhibit significantly poorer performance compared to funds categorized under Article 6 during the initial phase after launch. On average, Article 8 funds even demonstrate positive returns earlier than their peers. However, the panel regression analysis suggests that Article 8 funds slightly underperform when compared to Article 6 funds over time.

While investors may not anticipate lower initial returns when opting for higher SFDR categories, they should nevertheless be aware of the limitations inherent in the existing SFDR labeling system within the unlisted real estate sector.

To the best of our knowledge, this study represents the first quantitative examination of unlisted real estate fund performance under the SFDR. By providing unique insights into the J-Curves of funds, our research contributes to the existing body of knowledge on the impact of sustainability regulations in the financial sector.

Climate change is a problem that concerns all of us. Despite the information produced by organizations such as the Expert Team on Climate Change Detection and Indices and the United Nations, only a few cities have been planned taking into account the climate changes indices. This paper aims to study climatic variations, how climate conditions might change in the future and how these changes will affect the activities and living conditions in cities, specifically focusing on Mexico city.

In this approach, two distinct machine learning regression models, k-Nearest Neighbors and Support Vector Regression, were used to predict variations in climate change indices within select urban areas of Mexico city. The calculated indices are based on maximum, minimum and average temperature data collected from the National Water Commission in Mexico and the Scientific Research Center of Ensenada. The methodology involves pre-processing temperature data to create a training data set for regression algorithms. It then computes predictions for each temperature parameter and ultimately assesses the performance of these algorithms based on precision metrics scores.

This paper combines a geospatial perspective with computational tools and machine learning algorithms. Among the two regression algorithms used, it was observed that k-Nearest Neighbors produced superior results, achieving an R² score of 0.99, in contrast to Support Vector Regression, which yielded an R² score of 0.74.

The full potential of machine learning algorithms has not been fully harnessed for predicting climate indices. This paper also identifies the strengths and weaknesses of each algorithm and how the generated estimations can then be considered in the decision-making process.

This study aims to propose and numerically assess different ways of discretising a very weak formulation of the Poisson problem.

We use integration by parts twice to shift smoothness requirements to the test functions, thereby allowing low-regularity data and solutions.

Various conforming discretisations are presented and tested, with numerical results indicating good accuracy and stability in different types of problems.

This is one of the first articles to propose and test concrete discretisations for very weak variational formulations in primal form. The numerical results, which include a problem based on real MRI data, indicate the potential of very weak finite element methods for tackling problems with low regularity.

Fused Filament Fabrication (FFF) is one of the growing technologies in additive manufacturing, that can be used in a number of applications. In this method, process parameters can be customized and their simultaneous variation has conflicting impacts on various properties of printed parts such as dimensional accuracy (DA) and surface finish. These properties could be improved by optimizing the values of these parameters.

In this paper, four process parameters, namely, print speed, build orientation, raster width, and layer height which are referred to as “input variables” were investigated. The conflicting influence of their simultaneous variations on the DA of printed parts was investigated and predicated. To achieve this goal, a hybrid Genetic Algorithm – Artificial Neural Network (GA-ANN) model, was developed in C#.net, and three geometries, namely, U-shape, cube and cylinder were selected. To investigate the DA of printed parts, samples were printed with a central through hole. Design of Experiments (DoE), specifically the Rotational Central Composite Design method was adopted to establish the number of parts to be printed (30 for each selected geometry) and also the value of each input process parameter. The dimensions of printed parts were accurately measured by a shadowgraph and were used as an input data set for the training phase of the developed ANN to predict the behavior of process parameters. Then the predicted values were used as input to the Desirability Function tool which resulted in a mathematical model that optimizes the input process variables for selected geometries. The mean square error of 0.0528 was achieved, which is indicative of the accuracy of the developed model.

The results showed that print speed is the most dominant input variable compared to others, and by increasing its value, considerable variations resulted in DA. The inaccuracy increased, especially with parts of circular cross section. In addition, if there is no need to print parts in vertical position, the build orientation should be set at 0° to achieve the highest DA. Finally, optimized values of raster width and layer height improved the DA especially when the print speed was set at a high value.

By using ANN, it is possible to investigate the impact of simultaneous variations of FFF machines’ input process parameters on the DA of printed parts. By their optimization, parts of highly accurate dimensions could be printed. These findings will be of significant value to those industries that need to produce parts of high DA on FFF machines.

This paper assesses the environment of legitimacy by determining the role of institutional quality and policy uncertainty on the performance of five major South Asian stock markets (India, Pakistan, Bangladesh, Sri Lanka, and Nepal) using 21 years data from 2000 to 2020. The focus of this study is to approach the issue of the environment of legitimacy that leads to sustained market returns.

Panel cointegration tests of Kao and Pedroni are applied, and the Dynamic Panel Vector Autoregressive (PVAR) model is used to determine the estimates.

ADF P-Values of both Kao and Pedroni tests show that the panels are cointegrated; the statistical significance of the results of the Kao and Pedroni panel cointegration test confirms cointegration among the variables. After determining the most appropriate lag, the analysis is done using PVAR. The results indicate that institutional quality, policy uncertainty, and GDP positively affect stock market return. Meanwhile, government actions and inflation negatively affect stock market returns. On the other hand, stock market return positively affects institutional quality, government action, policy uncertainty, and GDP. While stock market return negatively affects inflation.

The sample is taken only from a limited number of South Asian countries, and the period is also limited to 21 years.

Based on our research findings, we have identified several policy implications recommended to enhance and sustain the performance of stock markets.

This paper uses a unique analytical tool, which gives a better insight into the problem. The value of this work lies in its findings, which also have practical implications and theoretical significance.

Studying the shear stress and pressure resulting on the walls of blood vessels, especially during high-pressure cases, which may lead to the explosion or rupture of these vessels, can also lead to the death of many patients. Therefore, it was necessary to try to control the shear and normal stresses on these veins through nanoparticles in the presence of some external forces, such as exposure to some electromagnetic shocks, to reduce the risk of high pressure and stress on those blood vessels. This study aims to examines the shear and normal stresses of electroosmotic-magnetized Sutterby Buongiorno’s nanofluid in a symmetric peristaltic channel with a moderate Reynolds number and curvature. The production of thermal radiation is also considered. Sutterby nanofluids equations of motion, energy equation, nanoparticles concentration, induced magnetic field and electric potential are calculated without approximation using small and long wavelengths with moderate Reynolds numbers.

The Adomian decomposition method solves the nonlinear partial differential equations with related boundary conditions. Graphs and tables show flow features and biophysical factors like shear and normal stresses.

This study found that when curvature and a moderate Reynolds number are present, the non-Newtonian Sutterby fluid raises shear stress across all domains due to velocity decay, resulting in high shear stress. Additionally, modest mobility increases shear stress across all channel domains. The Sutterby parameter causes fluid motion resistance, which results in low energy generation and a decrease in the temperature distribution.

Equations of motion, energy equation, nanoparticle concentration, induced magnetic field and electric potential for Sutterby nano-fluids are obtained without any approximation i.e. the authors take small and long wavelengths and also moderate Reynolds numbers.

In this paper we examine the validity of the J-curve hypothesis in four Southeast Asian economies (Indonesia, Malaysia, the Philippines and Thailand) over the 1980–2017 period.

We employ the linear autoregressive distributed lags (ARDL) model that captures the dynamic relationships between the variables and additionally use the nonlinear ARDL model that considers the asymmetric effects of the real exchange rate changes.

The estimated models were diagnostically sound, and the variables were found to be cointegrated. However, with the exception of Malaysia, the short- and long-run relationships did not attest to the presence of the J-curve effect. The trade flows were affected asymmetrically in Malaysia and the Philippines, suggesting the appropriateness of nonlinear ARDL in these countries.

The previous research tended to examine the effects of the real exchange rate changes on the agricultural trade balance and specifically the J-curve effect (deterioration of the trade balance followed by its improvement) in the developed economies and rarely in the developing ones. In this paper, we address this omission.