Search results

Concrete-filled double skin tube (CFDST) columns are considered one of the most effective steel-concrete composite sections owing to the higher load carrying capacity as compared to its counterpart concrete-filled tube (CFT) columns. This paper aims to numerically investigate the performance of axially loaded, circular CFDST short columns, with the innovative strengthening technique of providing stiffeners in outer tubes. Circular steel hollow sections have been adopted for inner as well as outer tubes, while varying the length of rectangular steel stiffeners, fixed inside the outer tubes only, to check the effect of stiffeners in partially and full-length stiffened CFDST columns.

The behaviour of these CFDST columns is investigated numerically by using a verified finite element analysis (FEA) model from the ABAQUS. The behaviour of 20-unstiffened, 80-partially stiffened and 20-full-length stiffened CFDST columns is studied, while varying the strength of steel (f_yo = 250–750 MPa) and concrete (30–90 MPa).

The FEA results are verified by comparing them with the previous test results. FEA study has exhibited that, there is a 7%–25% and 39%–49% increase in peak-loads in partially stiffened and full-length stiffened CFDST columns, respectively, compared to unstiffened CFDST columns.

Enhanced strength has been observed in partially stiffened and full-length stiffened CFDST columns as compared to unstiffened CFDST columns. Also, a significant effect of strength of concrete has not been observed as compared to the strength of steel.

Brief introduction on the importance and the need for plastic analysis methods were presented in the beginning section of this review. The plastic method for analysis was considered to be the more advanced method of analysis because of its ability to represent the true behaviour of the steel structures. Then in the following section, a literature analysis has been carried out on the previous investigations done on steel plates, steel beams and steel frames by other authors. The behaviour of them under different types of loading were presented and are under the investigation of innovative new analysis methods.

Structure member connections also have the potential for plastic failure. In this study, the authors have highlighted a few topics to be discussed. The three topics in this study are T-end plate connections to a square hollow section, semi-rigid connections and cold-formed steel storage racks with spine bracings using speed-lock connections. Connection is one of the important parts of a structure that ensures the integrity of the structure. Finally, in this technical paper, the authors introduce some topics related to seismic action. Application of the Theory of Plastic Mechanism Control in seismic design is studied in the beginning. At the end, its in-depth application for moment resisting frames-eccentrically braced frames dual systems is investigated.

When this study involves the design of a plastic structure, the design criteria must involve the ultimate load rather than the yield stress. As the steel behaves in the plastic range, it means the capacity of the steel has reached the ultimate load. Ultimate load design and load factor design are the methods in the range of plastic analysis. After the steel capacity has reached beyond the yield stress, it fulfills the requirement in this method. The plastic analysis method offers a consistent and logical approach to structural analysis. It provides an economical solution in terms of steel weight, as the sections designed using this method are smaller compared with elastic design methods.

The plastic method is the primary approach used in the analysis and design of statically indeterminate frame structures.

The Polish economy has undergone major challenges and changes over the past few decades. The country's trade flows, in particular, have become more firmly tied to the country’s Western neighbors as they have grown in volume. This study examines Poland's trade balances in ten Standard International Trade Classification (SITC) sectors versus the United States of America, first testing for and isolating structural breaks in each time series. These breaks are then included in a set of the cointegration models to examine their macroeconomic determinants.

Linear and nonlinear and nonlinear autoregressive distributed lag models, both with and without dummies corresponding to structural breaks, are estimated.

One key finding is that incorporating these breaks reduces the significance of the real exchange rate in the model, supporting the hypothesis that this variable already incorporates important information. It also results in weaker evidence for cointegration of all variables in certain sectors.

This study looks only at one pair of countries, without any third-country effects.

An important country pair's trade relations is examined; in addition, the real exchange rate is shown to incorporate economic information that results in structural changes in the economy. The paper extends the existing literature by conducting an analysis of Poland's trade balances with the USA, which have not been studied in such a context so far. A strong point is a broad methodology that lets compare the results the authors obtained with different kinds of models, both linear and nonlinear ones, with and without structural breaks.

Accurate and automatic clothing pattern making is very important in personalized clothing customization and virtual fitting room applications. Clothing pattern generating as well as virtual clothing simulation is an attractive research issue both in clothing industry and computer graphics.

Physics-based method is an effective way to model dynamic process and generate realistic clothing animation. Due to conceptual simplicity and computational speed, mass-spring model is frequently used to simulate deformable and soft objects follow the natural physical rules. We present a physics-based clothing pattern generating framework by using scanned human body model. After giving a scanned human body model, first, we extract feature points, planes and curves on the 3D model by geometric analysis, and then, we construct a remeshed surface which has been formatted to connected quad meshes. Second, for each clothing piece in 3D, we construct a mass-spring model with same topological structures, and conduct a typical time integration algorithm to the mass-spring model. Finally, we get the convergent clothing pieces in 2D of all clothing parts, and we reconnected parts which are adjacent on 3D model to generate the basic clothing pattern.

The results show that the presented method is a feasible way for clothing pattern generating by use of scanned human body model.

The main contribution of this work is twofold: one is the geometric algorithm to scanned human body model, which is specially conducted for clothing pattern design to extract feature points, planes and curves. This is the crucial base for suit clothing pattern generating. Another is the physics-based pattern generating algorithm which flattens the 3D shape to 2D shape of cloth pattern pieces.

The aim of this paper is to provide a narrative review of previous research on tourism demand modelling and forecasting and potential future developments.

A narrative approach is taken in this review of the current body of knowledge.

Significant methodological advancements in tourism demand modelling and forecasting over the past two decades are identified.

The distinct characteristics of the various methods applied in the field are summarised and a research agenda for future investigations is proposed.

本文旨在对先前关于旅游需求建模和预测的研究进行叙述性回顾并对未来潜在发展进行展望。

本文采用叙述性回顾方法对当前知识体系进行了评论。

本文确认了过去二十年旅游需求建模和预测方法论方面的重要进展。

本文总结了该领域应用的各种方法的独特特征, 并对未来研究提出了建议。

El objetivo de este documento es ofrecer una revisión narrativa de la investigación previa sobre modelización y previsión de la demanda turística y los posibles desarrollos futuros.

En esta revisión del marco actual de conocimientos sobre modelización y previsión de la demanda turística y los posibles desarrollos futuros,se adopta un enfoque narrativo.

Se identifican avances metodológicos significativos en la modelización y previsión de la demanda turística en las dos últimas décadas.

Se resumen las características propias de los diversos métodos aplicados en este campo y se propone una agenda de investigación para futuros trabajos.

The purpose of this paper is to develop a prototype of a wearable medical device in the form of a bandage with a real-time data monitoring platform, which can be used domestically for diabetic patients to identify the possibility of foot ulceration at the early stage.

The prototype can measure blood volumetric change and temperature variation in the forefoot area simultaneously. The waveform extracted using a pulsatile-blood-flow signal was used to assess blood perfusion-related information, and hence, predict ischemic ulcers. The temperature difference between ulcerated and the reference was used to predict neuropathic ulcers. The medical device can be used as a bandage during the application wherein the sensory module is placed inside the hollow pocket of the bandage. A platform was developed through a mobile application where doctors can extract real-time information, and hence, determine the possibility of ulceration.

The height of the peaks in the pulsatile-blood-flow signal measured from the subject with foot ischemic ulcers is significantly less than that of the subject without ischemic ulcers. In the presence of ischemic ulcers, the captured waveform flattens. Therefore, the blood perfusion from arteries to the tissue of the forefoot is considerably low for the subject with ischemic ulcers. According to the temperature difference data measured over 25 consecutive days, the temperature difference of the subject with neuropathic ulcers occasionally exceeded the 4 °F range but mostly had higher values closer to the 4 °F range. However, the temperature difference of the subject who had no complications of neuropathic ulcers did not exceed the 4 °F range, and the majority of the measurements occupy a narrow range from −2°F to 2 °F.

The proposed prototype of wearable medical apparatus can monitor both temperature variation and pulsatile-blood-flow signal on the forefoot simultaneously and thereby predict both ischemic and neuropathic diabetes using a single device. Most importantly, the wearable medical device can be used domestically without clinical assistance with a real-time data monitoring platform to predict the possibility of ulceration and the course of action thereof.

This paper aims to determine causal relationships between the level of productive credit, real deposits and money demand – all of them in real terms – and Gross National Product between 2006 and 2020.

The vector autoregressive technique (VAR) was used, where data from real macroeconomic aggregates published by the Central Bank of Ecuador (BCE) are correlated, such as productive credit, gross domestic product (GDP) per capita, deposits and money demand.

The results indicate that there is no causal relationship, in the Granger sense, between GDP and financial activity, but there is between the growth rate of real money demand per capita and the growth rate of total real deposits per capita.

The study shows that bank credit mainly finances the operations of current assets and/or liabilities. In addition, economic agents use the banking system mainly to carry out transactional and precautionary activities.

This study aims to capture how the association between a multichannel relational communication strategy (MRCS) and customer performance is contingent upon such customer performance (low- versus high-performance customers) and to reconcile past contradictory results in this marketing-related topic. To this end, the authors propose and validate the method of quantile regression as an unconventional, yet effective, means to proceed to that reconciliation.

This study collected data from 4,934 customers of a private pension fund firm and accounted for both firm- and customer-initiated relational communication channels (RCCs) and for customer lifetime value (CLV). This study estimated a generalized linear model and then a quantile regression model was used to account for customer performance heterogeneity.

This study finds that specific RCCs present different levels of association with performance for low- versus high-performance customers, where outcome customer performance is the dependent variable. For example, the relation between firm-initiated communication (FIC) and performance is stronger for low-CLV customers, whereas the relation between customer-initiated communication (CIC) and performance is increasingly stronger for high-CLV customers but not for low-CLV ones. This study also finds that combining different forms of FIC can result in a negative association with customer performance, especially for low-CLV customers.

The authors tested the conceptual model in one single firm in the specific context of financial services and with cross-sectional data, so there should be caution when extrapolating this study’s findings.

This study offers nuanced and precise managerial insights on recommended resource allocation along with relational communication efforts, showing how managers can benefit from adopting a differentiated-customer performance approach when designing their MRCS.

This study provides an overview of the state of the art of MRCS, proposes a contingency analysis of the relationship between MRCS and performance based on customer performance heterogeneity and suggests the quantile method to perform such analysis and help reconcile past contradictory findings. This study shows how the association between RCCs and CLV varies across the conditional quantiles of the distribution of customer performance. This study also addresses a recent call for a more holistic perspective on the relationships between independent and dependent variables.

The purpose of this study is to examine the impact of technological diversification (TD) on enterprise innovation performance, meanwhile focusing on the moderating effects of various organizational slack (i.e. absorbed and unabsorbed slack) and ownership types (i.e. state-owned or privately-owned) in the context of Chinese listed firms.

This study formulates five hypotheses based on organization and agency theories. Our empirical analysis employs a fixed-effect regression estimator with a unique panel dataset of Chinese-listed manufacturing firms and 13,566 firm-year observations over 9 years from 2012 to 2020.

Our findings show that an inverted U-shaped relationship exists between TD and innovation performance, varying with different types of organizational slack and ownership. In state-owned enterprises (SOEs), unabsorbed slack negatively moderates the inverted U-shaped relationship; however, in privately-owned enterprises (POEs), this relationship is positively moderated. Although absorbed slack has negative moderating effects in both SOEs and POEs, its impact is only significant for POEs.

Our results imply that organizational slack has a contrasting impact on the relationship between TD and innovation performance when the type of ownership varies. Therefore, the managers that intend to achieve optimal innovation performance through TD should understand how organizational slack can be leveraged.

This study contributes to the existing literature by applying the relationship between TD and innovative performance to the transition economy, as well as examining the double-edged sword impact of state ownership on firm innovation performance.