Search results

This paper aims to propose a novel control scheme and offer a control parameter optimizer to achieve better automatic carrier landing. Carrier landing is a challenging work because of the severe sea conditions, high demand for accuracy and non-linearity and maneuvering coupling of the aircraft. Consequently, the automatic carrier landing system raises the need for a control scheme that combines high robustness, rapidity and accuracy. In addition, to exploit the capability of the proposed control scheme and alleviate the difficulty of manual parameter tuning, a control parameter optimizer is constructed.

A novel reference model is constructed by considering the desired state and the actual state as constrained generalized relative motion, which works as a virtual terminal spring-damper system. An improved particle swarm optimization algorithm with dynamic boundary adjustment and Pareto set analysis is introduced to optimize the control parameters.

The control parameter optimizer makes it efficient and effective to obtain well-tuned control parameters. Furthermore, the proposed control scheme with the optimized parameters can achieve safe carrier landings under various severe sea conditions.

The proposed control scheme shows stronger robustness, accuracy and rapidity than sliding-mode control and Proportion-integration-differentiation (PID). Also, the small number and efficiency of control parameters make this paper realize the first simultaneous optimization of all control parameters in the field of flight control.

The purpose of this article is to prepare graphene/polyimide composite materials for use as bearing cage materials, improving the friction and wear performance of bearing cages.

The oil absorption and discharge tests were conducted to evaluate the oil content properties of the materials, while the mechanical properties were analyzed through cross-sectional morphology examination. Investigation into the tribological behavior and wear mechanisms encompassed characterization and analysis of wear trace morphology in PPI-based materials. Consequently, the influence of varied graphene nanoplatelets (GN) concentrations on the oil content, mechanical and tribological properties of PPI-based materials was elucidated.

The composites exhibit excellent oil-containing properties due to the increased porosity of PPI-GN composites. The robust formation of covalent bonds between GN and PPI amplifies the adhesive potency of the PPI-GN composites, thereby inducing a substantial enhancement in impact strength. Notably, the PPI-GN composites showed enhanced lubrication properties compared to PPI, which was particularly evident at a GN content of 0.5 Wt.%, as evidenced by the minimization of the average coefficient of friction and the width of the abrasion marks.

This paper includes implications for elucidating the wear mechanism of the polyimide composites under frictional wear conditions and then to guide the optimization of oil content and tribological properties of polyimide bearing cage materials.

In this paper, homogeneously dispersed PPI-GN composites were effectively synthesized by introducing GN into a polyimide matrix through in situ polymerization, and the lubrication mechanism of the PPI composites was compared with that of the PPI-GN composites to illustrate the composites’ superiority.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0415

This study aims to design and validate a theoretical model for capacitive imaging (CI) sensors that incorporates the interelectrode shielding and surrounding shielding electrodes. Through experimental verification, the effectiveness of the theoretical model in evaluating CI sensors equipped with shielding electrodes has been demonstrated.

The study begins by incorporating the interelectrode shielding and surrounding shielding electrodes of CI sensors into the theoretical model. A method for deriving the semianalytical model is proposed, using the renormalization group method and physical model. Based on random geometric parameters of CI sensors, capacitance values are calculated using both simulation models and theoretical models. Three different types of CI sensors with varying geometric parameters are designed and manufactured for experimental testing.

The study’s results indicate that the errors of the semianalytical model for the CI sensor are predominantly below 5%, with all errors falling below 10%. This suggests that the semianalytical model, derived using the renormalization group method, effectively evaluates CI sensors equipped with shielding electrodes. The experimental results demonstrate the efficacy of the theoretical model in accurately predicting the capacitance values of the CI sensors.

The theoretical model of CI sensors is described by incorporating the interelectrode shielding and surrounding shielding electrodes into the model. This comprehensive approach allows for a more accurate evaluation of the detecting capability of CI sensors, as well as optimization of their performance.

The purpose of this study was to examine how well a strength-based program grounded in positive psychology principles can advance the practical critical thinking skills of those pursuing the teacher training course.

This study used a single-group pre-test post-test design with 35 teacher-trainees from the Bachelor of Education course. The two-and-a-half-week strength-based program used the values in action survey to identify strengths. Pre- and post-test scores, measured with the Cornell Critical Thinking Test – Level Z, underwent Statistical Package for Social Sciences analysis including paired samples t-test for subcomponent and overall composite analysis.

Analysis of the pre- and post-test scores demonstrated a statistical significance in the critical thinking scores obtained by the teacher-trainees. Post-test scores were consistently significant. Out of the elements of critical thinking, induction, meaning, observation and credibility were more prominent. Deduction and assumption identification were also having a significant effect.

Most critical thinking programs focus on evaluating specific teaching methods for improving critical thinking skills. In education, positive psychology studies often center on students’ well-being, attention spans and academic success, aligning with wellness programs. Despite the importance of strengths in positive psychology, there is a lack of research on using a strength-based approach to boost critical thinking skills. This study aims to enhance teacher-trainees’ critical thinking by leveraging their individual strengths, moving away from traditional instructional strategies.

This study aims to clarify the evolution law of stress field and fracture field during the mining process of inclined coal seam, to prevent the occurrence of roof burst water and impact ground pressure accident during the advancing process of working face.

The evolution law of stress-fracture field under different mining conditions of inclined coal seam was studied by using discrete element method and similar material simulation method.

The overburden stress at the lower end of the coal seam was mainly transmitted to the deep rock mass on the left side, and the overburden stress at the upper end was mainly transmitted to the floor direction. With the increase of the inclined length of the mining coal seam, the development of the fracture zone gradually evolves from the “irregular arch” form to the “transversely developed trapezoid” form. The development range of the fracture zone was always in the internal area of the stress concentration shell.

An original element of this paper is based on the condition that the dip angle of coal seam is 35°, and the evolution law of overburden stress-fracture field during the excavation of coal seam with different lengths was analyzed by UDEC numerical simulation software. The coupling relationship between stress shell and fracture field was proposed, and the development range of fracture zone was determined by stress. The value of this paper is to provide technical support and practical basis for the safety production of a mine working face.

Implementing blockchain in sustainable development goals (SDGs) and environmental, social and governance (ESG)-aligned infrastructure development involves intricate strategic factors. Despite technological advancements, a significant research gap persists, particularly in emerging economies. This study aims to address the challenges related to SDGs and ESG objectives during infrastructure delivery remain problematic, identifying and evaluating critical strategic factors for successful blockchain implementation.

This study employs a three-stage methodology. Initially, 13 strategic factors are identified through a literature review and validated by conducting semi-structured interviews with six experts. In the second stage, the data were collected from nine additional experts. In the final stage, the collected data undergoes analysis using interpretive structural modeling (ISM)–cross-impact matrix multiplication applied to classification (MICMAC), aiming to identify and evaluate the independent and dependent powers of strategic factors driving blockchain implementation in infrastructure development for SDGs and ESG objectives.

The study’s findings highlight three significant independent factors crucial for successfully integrating blockchain technology (BT) into infrastructure development for SDGs and ESG goals: data security (F4), identity management (F8) and supply chain management (F7). The study unravels these factors, hierarchical relationships and dependencies by applying the MICMAC and ISM techniques, emphasizing their interconnectedness.

This study highlights critical strategic factors for successful blockchain integration in SDG and ESG-aligned infrastructure development, offering insights for policymakers and practitioners while emphasizing the importance of training and infrastructure support in advancing sustainable practices.

The aim of this study is first, to investigate the relative effect of user-generated content (UGC) and firm-generated content (FGC) on online brand advocacy, and second, to examine the mediation effect of customer engagement and the moderation effect of brand familiarity in the relationship between UGC and FGC and online brand advocacy. The differential impact of UGC and FGC on consumer behavior has yet to receive sufficient academic attention among hospitality scholars.

Based on social learning theory, cognitive consistency theory and schema theory, this study established an integrated research framework to explain the relationship between the constructs of the study. This study adopts a scenario-based experimental design in two separate studies within contexts to examine the proposed hypotheses.

The results revealed that UGC is a stronger predictor of online brand advocacy than FGC. A mediation analysis supported that the effect of digital content marketing types on online brand advocacy occurs because of customer engagement. Further, when the brand was familiar, participants showed a higher level of online brand advocacy than when they were exposed to FGC (vs. unfamiliar brand), whereas the effect of familiar and unfamiliar brands on online brand advocacy remains slightly close to each other when the participants were exposed to UGC. Brand familiarity positively enhanced participants’ engagement when they were exposed to UGC. Further, customer engagement is only a significant mediator when the brand is unfamiliar.

This paper presents significant managerial implications for hospitality companies about how they can effectively enhance brand advocacy in the online medium.

This research provides a novel contribution by examining the differential impact of UGC and FGC on online brand advocacy as well as uncovering the underlying mechanism of how and under what conditions user- and firm-generated content promotes online brand advocacy in the hospitality context.

The purpose of this paper is to present a model depicting the relationship between the behavioral intention of tourists in the conditions prevailing during a pandemic and other variables.

In constructing the research procedure, two measurements of tourist behavioral intention were taken into account, which were taken far apart in time. In verifying the developed model, the results of surveys of 1,615 people carried out in June 2021 and 917 people carried out in December 2021 were considered.

As a result of the habituation process, tourists show greater acceptance of the restrictions.

Information on the basis of which companies make management decisions plays a significant role in the creation of company value. In the tourism sector, the information concerns primarily consumer behavior.

Changes over time in risk perception, health protection motivation, and reactance due to perceived pandemic-related restrictions were taken into account in the context of behavioral intention towards tourism.

This study aims to investigate organizational learning, represented by the absorptive capacity, as a condition for the firm to learn about marketing data and make more informed decisions. The authors also aimed to understand how the behavior of micro, small and medium enterprises (MSME) businesses differ in this scenario through a multilevel perspective.

Placing absorptive capacity as a mediator of the relationship between business analytics and rational marketing decisions, the authors analyzed data from 224 Brazilian retail companies using structural equation modeling estimated with partial least squares. To test the cross-level moderation effect, the authors also performed a multilevel analysis in RStudio.

The authors found a partial mediation of the absorptive capacity in the relation between business analytics and rational marketing decisions. The authors also discovered that, in the MSMEs firms’ group, even if smaller companies find it more difficult to use data, those that do may reap more benefits than larger ones. This is due to the influence of size in how firms handle information.

The sample size, despite having shown to be consistent and valid, is considered small for a multilevel study. This suggests that our multilevel results should be viewed as suggestive, rather than conclusive, and subjected to further validation.

Rather than solely positioning business analytics as a tool for decision support, the authors’ analysis highlights the importance for firms to develop the absorptive capacity to enable ongoing acquisition, exploration and management of knowledge.

MSMEs are of economic and social importance to most countries, especially developing ones. This research aimed to improve understanding of how this group of firms could transform knowledge into better decisions. The authors also highlight micro and small firms’ difficulties with the use of marketing data so that they can have more effective practices.

The research contributes to the understanding of organizational mechanisms to absorb and learn from the vast amount of current marketing information. Recognizing the relevance of MSMEs, a preliminary multilevel analysis was also conducted to comprehend differences within this group.

The discontinuous usage behavior of short video social media presents an ongoing challenge to platform development. The purpose of this study is to investigate the antecedents of intentions to short media discontinuous usage.

This study adopts a Cognition–Affection–Conation (CAC) framework to analyze short video social media discontinuous intention on the basis of cognitive dissonance theory (CDT) and self-efficacy theory. The empirical evaluation of the research model was conducted using SmartPLS 2.0 and was based on questionnaire data obtained from participants in China.

The results show information overload and user addiction have a significant positive association with cognitive dissonance, which is, in turn, found to significantly impact discontinuous usage intention. Self-efficacy moderates the relationships between information overload, user addiction, cognitive dissonance and discontinuous usage.

This study contributes to the understanding of the factors that influence short video discontinuous usage intention and it achieves this by engaging from a CDT perspective and by applying Self-Efficacy Theory. Theoretical implications for future short video platform research, as well as practical suggestions for short video platform operators and users, are also discussed.