Search results

Hoping to uncover the physical principles of the vibration of the functionally graded material (FGM) microplate, by which the authors can make contributions to the design and manufacturing process in factories like micro-electro-mechanical system (MEMS) and other industries.

The authors design a method by establishing a reasonable mathematical model of the physical microplate composed of a porous FGM.

The authors discover that the porosity, the distributions of porosity, the power law of the FGM and the length-to-thickness ratio all affect the natural frequency of the vibration of the microplate, but in different ways.

Originally proposed a model of the micro FGM plate considering the different distributions of the porosity and scale effect and analyzed the vibration frequency of it.

Kriging surrogate model has demonstrated a powerful ability to be applied to a variety of engineering challenges by emulating time-consuming simulations. However, when it comes to problems with high-dimensional input variables, it may be difficult to obtain a model with high accuracy and efficiency due to the curse of dimensionality. To meet this challenge, an improved high-dimensional Kriging modeling method based on maximal information coefficient (MIC) is developed in this work.

The hyperparameter domain is first derived and the dataset of hyperparameter and likelihood function is collected by Latin Hypercube Sampling. MIC values are innovatively calculated from the dataset and used as prior knowledge for optimizing hyperparameters. Then, an auxiliary parameter is introduced to establish the relationship between MIC values and hyperparameters. Next, the hyperparameters are obtained by transforming the optimized auxiliary parameter. Finally, to further improve the modeling accuracy, a novel local optimization step is performed to discover more suitable hyperparameters.

The proposed method is then applied to five representative mathematical functions with dimensions ranging from 20 to 100 and an engineering case with 30 design variables.

The results show that the proposed high-dimensional Kriging modeling method can obtain more accurate results than the other three methods, and it has an acceptable modeling efficiency. Moreover, the proposed method is also suitable for high-dimensional problems with limited sample points.

Instantaneous unloading with equal force is usually used to simulate the sudden failure of cables. This simulation method with equivalent force requires obtaining the magnitude and direction of the force for the failed cable in the normal state. It is difficult, however, to determine the magnitude or direction of the equivalent force when the shape of the cable is complex (space curve). This model of equivalent force may be difficult to establish. Thus, a numerical simulation method, the instantaneous temperature rise method, was proposed to address the dynamic response caused by failures of the cables with complex structural form.

This method can instantly reduce the cable force to zero through the instantaneous temperature rise process of the cable. Combined with theoretical formula and finite element model, the numerical calculation principle and two key parameters (temperature rise value and temperature rise time) of this method were detailed. The validity of this approach was verified by comparing it with equivalent force models. Two cable-net case with saddle curved surfaces were presented. Their static failure behaviors were compared with the dynamic failure behaviors calculated by this method.

This simulation method can effectively address the structural dynamic response caused by cable failure and may be applied to all cable structures.

An instantaneous temperature rise method (ITRM) is proposed and verified. Its calculation theory is detailed. Two key parameters, temperature rise value and temperature rise time, of this method are discussed and the corresponding reference values are recommended.

Nowadays, artificial intelligence (AI) technology has demonstrated extensive applications in the field of art design. Attribute editing is an important means to realize clothing style and color design via computer language, which aims to edit and control the garment image based on the specified target attributes while preserving other details from the original image. The current image attribute editing model often generates images containing missing or redundant attributes. To address the problem, this paper aims for a novel design method utilizing the Fashion-attribute generative adversarial network (AttGAN) model was proposed for image attribute editing specifically tailored to women’s blouses.

The proposed design method primarily focuses on optimizing the feature extraction network and loss function. To enhance the feature extraction capability of the model, an increase in the number of layers in the feature extraction network was implemented, and the structure similarity index measure (SSIM) loss function was employed to ensure the independent attributes of the original image were consistent. The characteristic-preserving virtual try-on network (CP_VTON) dataset was used for train-ing to enable the editing of sleeve length and color specifically for women’s blouse.

The experimental results demonstrate that the optimization model’s generated outputs have significantly reduced problems related to missing attributes or visual redundancy. Through a comparative analysis of the numerical changes in the SSIM and peak signal-to-noise ratio (PSNR) before and after the model refinement, it was observed that the improved SSIM increased substantially by 27.4%, and the PSNR increased by 2.8%, serving as empirical evidence of the effectiveness of incorporating the SSIM loss function.

The proposed algorithm provides a promising tool for precise image editing of women’s blouses based on the GAN. This introduces a new approach to eliminate semantic expression errors in image editing, thereby contributing to the development of AI in clothing design.

In a coaxial ultrasonic flow sensor (UFS), wall thickness is a vital parameter of the measurement tube, especially those with small inner diameters. The paper aims to investigate the influence of wall thickness on the transient signal characteristics in an UFS.

First, the problem was researched experimentally using a series of measurement tubes with different wall thicknesses. Second, a finite element method–based model in the time domain was established to validate the experimental results and further discussion. Finally, the plane wave assumption and oblique incident theory were used to analyze the wave propagation in the tube, and an idea of wave packet superposition was proposed to reveal the mechanism of the influence of wall thickness.

Both experimental and simulated results showed that the signal amplitude decreased periodically as the wall thickness increased, and the corresponding waveform varied dramatically. Based on the analysis of wave propagation in the measurement tube, a formula concerning the phase difference between wave packets was derived to characterize the signal variation.

This paper provides a new and explicit explanation of the influence of wall thickness on the transient signal in a co-axial UFS. Both experimental and simulated results were presented, and the mechanism was clearly described.

Microribbon with meander type based on giant magnetoimpedance (GMI) effect has become a research hot spot due to their higher sensitivity and spatial resolution. The purpose of this paper is to further optimize the line spacing to improve the performance of meanders for sensor application.

The model of GMI effect of microribbon with meander type is established. The effect of line spacing (Ls) on GMI behavior in meanders is analyzed systematically.

Comparison of theory and experiment indicates that decreasing the line spacing increases the negative mutual inductance and a consequent increase in the GMI effect. The maximum value of the GMI ratio increases from 69% to 91.8% (simulation results) and 16.9% to 51.4% (experimental results) when the line spacing is reduced from 400 to 50 µm. The contribution of line spacing versus line width to the GMI ratio of microribbon with meander type was contrasted. This behavior of the GMI ratio is dominated by the overall negative contribution of the mutual inductance.

This paper explores the effect of line spacing on the GMI ratio of meander type by comparing the simulation results with the experimental results. The superior line spacing is found in the identical sensing area. The findings will contribute to the design of high-performance micropatterned ribbon with meander-type GMI sensors and the establishment of a ribbon-based magnetic-sensitive biosensing system.

The paper aims to elucidate effective strategies for promoting the adoption of green technology innovation within the private sector, thereby enhancing the value of public–private partnership (PPP) projects during the operational phase.

Utilizing prospect theory, the paper considers the government and the public as external driving forces. It establishes a tripartite evolutionary game model composed of government regulators, the private sector and the public. The paper uses numerical simulations to explore the evolutionary stable equilibrium strategies and the determinants influencing each stakeholder.

The paper demonstrates that government intervention and public participation substantially promote green technology innovation within the private sector. Major influencing factors encompass the intensity of pollution taxation, governmental information disclosure and public attention. However, an optimal threshold exists for environmental publicity and innovation subsidies, as excessive levels might inhibit technological innovation. Furthermore, within government intervention strategies, compensating the public for their participation costs is essential to circumvent the public's “free-rider” tendencies and encourage active public collaboration in PPP project innovation.

By constructing a tripartite evolutionary game model, the paper comprehensively examines the roles of government intervention and public participation in promoting green technology innovation within the private sector, offering fresh perspectives and strategies for the operational phase of PPP projects.

The aim of this study was to analyze the effects of carbon reduction efforts and preservation efforts on system benefits in the cold chain industry of fresh products.

This study develops an optimal decision game model for the fresh products in the cold chain, incorporating the retailer's preservation effort and the supplier's carbon emission reduction effort. It quantifies the relationship between carbon emission reduction effort, preservation effort and system profit. The model considers parameters like carbon trading price, consumer low-carbon preference and consumer freshness preference, reflecting real-world conditions and market trends. Numerical simulations are conducted by varying these parameters to observe their impact on system profit.

Under the carbon cap-and-trade policy, the profit of the fresh cold chain system is higher than that of the fresh cold chain system without carbon constraints, and the profit of the supplier under decentralized decision-making is increased by nine times in the simulation results. The increase in carbon trading prices can effectively improve the freshness level of fresh products cold chain, carbon emission reduction level and system profit.

This study comprehensively considers the factors of freshness and carbon emission reduction, provides the optimal low-carbon production decision-making reference for the fresh food cold chain and promotes the sustainable development of the fresh food cold chain.

The purpose of this study is to propose a fractal model of thermal contact conductance of rough surfaces based on axisymmetric cosinusoidal asperity.

The effects of contact load, fractal dimension, fractal roughness and friction coefficient on the thermal contact conductance of rough surfaces were investigated in this study.

The findings suggest that as the contact load increases, the thermal contact conductance of rough surfaces also increases. In addition, an increase in the fractal dimension corresponds to an increase in the thermal contact conductance. Conversely, an increase in fractal roughness leads to a decrease in thermal contact conductance. The smaller the friction coefficient, the lower the thermal contact conductance of the rough surface. In practical engineering applications, it is possible to achieve the desired thermal contact conductance of rough surfaces by selecting surfaces with appropriate roughness.

A fractal model of thermal contact conductance of rough surfaces based on axisymmetric cosinusoidal asperity was established in this study. The findings of this study offer a theoretical foundation for investigating the thermal contact conductance of rough surfaces.

Ensuring the safety of structures is important. However, when a structure possesses both an implicit performance function and an extremely small failure probability, traditional methods struggle to conduct a reliability analysis. Therefore, this paper proposes a reliability analysis method aimed at enhancing the efficiency of rare event analysis, using the widely recognized Relevant Vector Machine (RVM).

Drawing from the principles of importance sampling (IS), this paper employs Harris Hawks Optimization (HHO) to ascertain the optimal design point. This approach not only guarantees precision but also facilitates the RVM in approximating the limit state surface. When the U learning function, designed for Kriging, is applied to RVM, it results in sample clustering in the design of experiment (DoE). Therefore, this paper proposes a FU learning function, which is more suitable for RVM.

Three numerical examples and two engineering problem demonstrate the effectiveness of the proposed method.

By employing the HHO algorithm, this paper innovatively applies RVM in IS reliability analysis, proposing a novel method termed RVM-HIS. The RVM-HIS demonstrates exceptional computational efficiency, making it eminently suitable for rare events reliability analysis with implicit performance function. Moreover, the computational efficiency of RVM-HIS has been significantly enhanced through the improvement of the U learning function.