Search results

Currently, the researches on garment development and wear comfort evaluation mainly focus on the static condition type and seldom involved dynamic condition. Therefore, the purpose of this paper is to develop cycling clothes’ patterns and evaluate their dynamic wear comfort.

First, the 3D-to-2D flattening technology was applied to develop garment patterns of a cycler’s jersey T-shirt. Then, 3D animation technology was used to simulate the scene of cycling. Next, a novel pressure-measuring method was proposed to measure static and dynamic clothing pressures in a virtual environment. Finally, the collected data were used for evaluating wear comfort.

Compared to static conditions, the dynamic wear comfort noticeably improved at the front neck, side neck, upper front chest, around back neck point and front shoulder, and the front neck. Compared to static conditions, the dynamic wear comfort visibly deteriorates at the back neck, below chest, outseam, back except around back neck point and around scapula, and the around scapula area. The dynamic pressure at back neck, below front chest and shoulder fluctuate wildly throughout the whole cycling. On the contrary, the dynamic pressure at the front neck, side neck, front upper chest and at the back cause it to tend to stability during cycling.

The 3D virtual-reality technology was applied to simulate cycling. And a novel method was proposed to measure numerical clothing pressures for evaluating the dynamic wear comfort. The proposed method can not only quantitatively evaluate the wear comfort of cycling clothes and optimize cycling clothes’ patterns, but also can be applied to other tight garment types.

China has showed its eagerness in using its economic strength in the very recent years. Is China going to be a major sanctioning state like the United States or the European Union? This chapter argues that although there have been an increasing number of economic sanctions imposed by China with its expanding national interests and growing diplomatic problems, China will still keep a low profile in using economic sanctions because of the restraining factors such as the WTO rules, inherent problems in its economy, the pursuit of a good reputation and its strategy of peaceful development. Thus the frequency and tactics of using economic sanctions may vary according to its rising economy and changing international situation, but that will go in a very limited way.

The purpose of this paper is to investigate the creep properties of Sn‐0.7Cu composite solder joints reinforced with optimal nano‐sized Ag particles in order to improve the creep performance of lead‐free solder joints by a composite approach.

The composite approach has been considered as an effective method to improve the creep performance of solder joints. Nano‐sized Ag reinforcing particles were incorporated into Sn‐0.7Cu solder by mechanically mixing. A systematic creep study was carried out on nano‐composite solder joints reinforced with optimal nano‐sized Ag particles and compared with Sn‐0.7Cu solder joints at different temperatures and stress levels. A steady‐state creep constitutive equation for nano‐composite solder joints containing the best volume reinforcement was established in this study. Microstructural features of solder joints were analyzed to help determine their deformation mechanisms during creep.

The creep activation energies and stress exponents of Ag particle‐enhanced Sn‐0.7Cu lead‐free based composite solder joints were higher than those of matrix solder joints under the same stress and temperature. Thus, the creep properties of nano‐composite solder joints are better than those of Sn‐0.7Cu solder joints.

The findings indicated that nano‐sized Ag reinforcing particles could effectively improve the creep properties of solder joints. A new steady‐state creep constitutive equation of nano‐composite solder joints was established. Deformation mechanisms of Sn‐0.7Cu solder and nano‐composite solder joints during creep were determined.

This paper aims to study the material conscious information network (MCIN) to present new models of clothing products and persons and propose new crowd-designing patterns to reconstruct an improved supply–demand relationship in clothing industry.

This paper aims to study the MCIN to present new models of clothing products and persons and propose new crowd-designing patterns to reconstruct an improved supply–demand relationship in clothing industry.

At last, this paper implements a prototype system of novel e-commerce platform based on the CDCI to illustrate the effectiveness and soundness of the CDCI modeling.

Different from most related works just focusing on the physiology dimension in the matching of customer and clothing, this paper proposes that the dimension of physiology, character, knowledge and experience should be synthetically considered.

The purpose of this paper is to study the wireless power transfer (WPT) system that always achieves the maximum output power at a fixed angular frequency using the dynamic impedance compensation and also the maximum transfer efficiency.

An efficient topology of the WPT system is proposed which states that the functions of the relay are transformed into the functions of the compensator in the three-coil WPT system.

Increasing the ratio of the frequency detuning factor of the compensator relative to the frequency detuning factor of the compensator also causes the curves of the normalized output power and the transfer efficiency to move toward the high frequency direction.

The scheme of the dynamic compensation for the WPT using a compensator is convenient to obtain the dynamic impedance compensation by adding or removing the capacitances or inductances from the compensator.

The functions of the relay are transformed into the functions of the compensator in the three-coil WPT system.

This paper aims to find an approach that achieves constant output power and transfer efficiency in an open space, such as charging pads.

In this study, a topology of the five-coil system including two transmitting coils is presented. Also, in a fixed-frequency mode and an open space, this study focuses on the two transmitting coils to achieve the uniform magnetic field and ultimately, attain the constant output power and transfer efficiency.

In a fixed-frequency mode and an open space, the constant output power and transfer efficiency is then achieved in experiments by inserting the relay loop into the uniform magnetic field.

An approach that achieves constant output power and transfer efficiency in an open space. The topology of the five-coil magnetically coupled resonant-wireless power transfer (MCR-WPT) system shows prospective value for various applications, which could be used at designing of wireless battery charger dedicated for cars or mobile phones.

By comparing the simulation and experimental results, the topology can be optimized in the transmission performance by itself. By doing so, the constant output power and transfer ef?ciency are achieved in the constant frequency mode.

An exact pattern prototype is a prerequisite for female girdle pattern-making. The purpose of this paper is to develop new ways to make girdle pattern prototypes based on 3D technology.

This paper presented two novel methods for creating girdle pattern prototypes. The first one was the girdle's parametric foundation pattern developing method based on 3D geometric modeling. In this method, considering the different characteristics of a female's lower body shape, several models were created to define the relationship between the female's lower body shape and the pattern, such as a side-waist curvature model, an interior-posterior waist-warping model, a buttocks' parametric model and an abdomen parametric model. Then, parameters of drawing the prototype were abstracted to facilitate transforming the 3D geometric model into the 2D pattern. Another method was implemented by 3D virtual modeling and unwrapping. The whole process included surface division, surface reconstruction and surface unwrapping.

The prototypes created by these two methods were tested using the 3D virtual trying-on examination. Trial tests showed that the patterns can be dressed in the right positions on the virtual model with little pressure. This means that the proportions and shapes of the pattern are correct. The prototypes obtained through the methods proposed in this paper have good effects and high precision. Both methods can be used for making the girdle's foundation pattern.

Two pragmatic approaches of girdle's prototype building have been put forward. The parametric prototype designing method has changed the unconstrained state of free modeling. The pattern structure can be controlled by parameter constraints. In the other method, with 3D scanning and surface modeling technology, personalized girdle's pattern is generated, and the segmentation lines of the girdle can be designed flexibly according to the requirements. These findings also can be used in other tight garments' prototype making.

The purpose of this paper is to find out the main factors that influence wearing comfort and how they influence garment-wearing comfort.

Overall, 120 postures were extracted from the activities of daily life and work. Then, the numerical values of clothing pressure of these postures were measured using three-dimension virtual-reality technology. Finally, the data mining technology was applied to analyze the collected data.

The wearing comfort of pants is mainly influenced by four factors – waist-hip factor, knee-shank factor, crotch factor and thigh-calf factor – and their contributions account for 39.17, 16.4, 13.96 and 6.95 percent, respectively. Hip, waist, crotch and knee influence wearing comfort significantly, and the part below the knee and the part of back thigh have no obvious effect on wearing comfort. Furthermore, the wearing comfort is acceptable if the numerical clothing pressures are below 20 kPa at the parts of hip, waist and crotch and below 10 kPa at the parts of back thigh, knee and shank.

The paper demonstrates how different human body parts influence garment-wearing comfort. All of the results in this research facilitate pattern design of pants and quantitative evaluation of garment-wearing comfort.

Tourism is a labor-intensive sector with extensive links to other industries and plays a vital role in creating employment. This study aims to propose a new framework to analyze the intrinsic structure of the employment effects of tourism-related sectors and their drivers.

This study uses input–output and structural decomposition analysis (IO-SDA) to quantify the employment effects of tourism-related sectors and their driving mechanisms based on China’s I-O tables of 2002, 2007, 2012 and 2017.

The results show a declining trend in the intensity of direct or indirect employment effects in tourism-related sectors, indicating a decreasing number of jobs directly or indirectly required to create a unit of tourism output. Among tourism-related sectors, catering has the highest intensity of indirect employment effects over the study period. Catering stimulates the indirect employment of agriculture, forestry, animal husbandry, fishery and food and tobacco manufacturing. The decomposition analysis reveals that final demand is the largest contributor to the increase in tourism employment, while technological progress shifts from an employment-creation effect in 2002–2012 to an employment-destruction effect in 2012–2017.

This study proposes a new analytical framework to investigate the structural proportional relationship between the direct and indirect employment effects of various tourism-related sectors and their dynamic changes. Doing so, it provides valuable references for policymakers to promote tourism employment.

旅游相关部门就业效应的驱动因素：以中国为例

摘要

旅游业是一个劳动密集型部门, 与其他国民经济部门有着广泛的联系, 这在创造就业方面发挥着重要作用。本研究旨在建立一个框架, 分析旅游相关部门就业效应的内在结构及其驱动因素。

本研究基于中国2002年、2007年、2012年和2017年的投入产出表, 引入投入产出和结构分解分析（IO-SDA）法量化了旅游相关行业的就业效应及其变化的驱动机制。

旅游相关部门的直接或间接就业强度呈下降趋势, 可见创造一个单位的旅游产出所需的直接或间接工作数量在减少。在旅游相关部门中, 餐饮部门在研究期内的间接就业效应强度最高, 主要带动了农、林、牧、渔业和食品及烟草制造业的间接就业。旅游就业效应变动的驱动因素中, 最终需求是旅游就业效应增加的最大贡献者, 技术效应从2002-2012年期间的就业创造效应转变为2012-2017年期间的就业破坏效应。

本研究建立了一个全新的分析框架, 可以揭示各个旅游相关部门的直接和间接就业效应之间的结构比例关系及其动态变化。对旅游就业效应的驱动因素分析可以为政策制定者提供针对性的建议, 以促进旅游就业。

Factores que impulsan los efectos del empleo en los sectores relacionados con el turismo: El caso de China continental

Resumen

El turismo es un sector intensivo en mano de obra con amplios vínculos con otras industrias y desempeña un papel vital en la creación de empleo. Este estudio propone un nuevo marco para analizar la estructura intrínseca de los efectos en el empleo de los sectores relacionados con el turismo y sus impulsores.

Este estudio utiliza el análisis de entrada-salida (input-output) y de descomposición estructural (structural decomposition) (IO-SDA) para cuantificar los efectos sobre el empleo en los sectores relacionados con el turismo y sus mecanismos impulsores, basándose en las tablas input-output de China de 2002, 2007, 2012 y 2017.

Los resultados muestran una tendencia a la baja en la intensidad de los efectos directos o indirectos del empleo en los sectores relacionados con el turismo, lo que indica un número cada vez menor de puestos de trabajo directos o indirectos necesarios para crear una unidad de producción turística. Entre los sectores relacionados con el turismo, la restauración tiene la mayor intensidad de efectos indirectos sobre el empleo durante el periodo de estudio. La restauración estimula el empleo indirecto de la agricultura, la silvicultura, la ganadería, la pesca y la fabricación de alimentos y tabaco. El análisis de descomposición revela que la demanda final es la que más contribuye al aumento del empleo turístico, mientras que el progreso tecnológico pasa de ser un efecto de creación de empleo en 2002-2012 a un efecto de destrucción de empleo en 2012-2017.

Este estudio propone un nuevo marco analítico para investigar la relación estructural proporcional entre los efectos directos e indirectos del empleo de varios sectores relacionados con el turismo y sus cambios dinámicos. De este modo, proporciona valiosas referencias para que los responsables políticos promuevan el empleo en el sector turístico.