Search results

In recent years, the demand for oil and gas pipelines has increased rapidly. Due to the restrictions of the pipeline routing, pipelines are generally laid in parallel or in the same trench, which results in stray-current interference between the independent cathodic protection (CP) systems. The purpose of this paper is to study the interference between the long-distance parallel pipelines and to obtain the optimized operation for the CP systems.

In this study, first, the numerical model of parallel pipelines was established using the boundary element analysis software (BEASY). Second, the effects of horizontal distance between parallel pipelines, coating damage rate, soil conductivity and anode output current on the interference of parallel pipelines were studied. Finally, by varying the layout or the output currents of CP stations, an optimized operation scheme osf long-distance parallel pipelines was put forward.

Simulation results showed that with a decrease in soil conductivity or coating damage rate, the interference increased. Moreover, the interference decreased with an increase in horizontal distance between two parallel pipelines or a decrease in anode output current. It was found that there are three methods to reduce the interference between long-distance parallel pipelines: to reduce the output currents of CP stations, combined protection and to close part of the CP stations. Among them, to close part of CP stations was the optimized scheme because of the lowest operating and maintenance cost.

The optimized operation scheme proposed in this study can not only solve the interference between parallel pipelines but also provide guidance for the parallel pipelines to be built in the future. Reasonably arranging the cathodic protection stations using numerical simulation can avoid the interference in the cathodic protection systems, and reduce the construction cost.

Listening is often considered the cornerstone of the communication process, with feedback being a crucial skill for effective management. The primary objective of this article was to investigate the relationship between managers’ listening skills and feedback skills from their subordinates’ perspectives. Moreover, it explores the mediating effect of message-sending skills and the ability to deal with interference in this relationship.

This article deployed a quantitative, descriptive research design. The authors developed and distributed a self-administered questionnaire via non-probability convenience sampling, resulting in 304 useable responses.

The results of the main direct effect test (model 1) indicate that listening is positively associated with feedback. Model 2 established that message-sending skills did not directly mediate that relationship. On the other hand, the ability to deal with interference was found to mediate the relationship. Finally, model 4 showed the multi-mediating effect of message-sending skills and the ability to deal with interference in the relationship between listening and feedback.

As far as the researchers are aware, this paper is the first of its kind to show the ability to deal with interference as a mediating factor in a statistical model. Moreover, this study is the first to present a continuous intermediary role played by message-sending skills and the ability to deal with interference in the relationship between listening and feedback.

Aims to realize the high accurate contour control with high‐speed motion of articulated robot manipulator (ARM) with interference.

Proposes a new contour control method by using Gaussian neural network (GNN) to solve the problem of the deterioration of the contour control performance due to the interference between robot links. The construction of the GNN controller and the approximation of the interference are based on the Euler‐Lagrange model of ARM. The actual input/out data about the motion of ARM are used for training the GNN to accurately represent the inverse dynamics of ARM with interference. With the Lyapunov function, the stability and the robustness of the GNN controller are discussed. Through the simulation and experiment, it verified that the precision of the contour control has been improved, and illustrated the good features of the proposed method.

Finds that the actual data about the motion of ARM, which is easily obtained from the working field, can express the real features of ARM, and the GNN controller can improve the precision of the contour control with good features.

The proposed method provides an effective method for realizing high accurate contour control of ARM with interference. It can be extended to the ARMs with more than two links and concerning more factors affecting the precision of the contour control, such as friction or gravity.

Proposes a new GNN controller for realizing high accurate contour control of ARM with interference, which is significant for industry.

The rotor in screw motor is driven to rotate by highly pressure difference of drilling fluid (DF), while rotor drives drill bit to break rocks. DF works in the volume cavity (VC) which exists between the stator and rotor (SAR), these process realizes the conversion from hydraulic energy to mechanical energy finally. In order to assure seal performance and output power reliability of VC in common hypocycloid screw motor (CHSM), it’s essential to survey SAR end-face profile.

In this article, based on the internal and external cycloid method given for SAR end-face of φ172 7/8-head LZ type CHSM, the interference among SAR is established based on the meshing model through theoretical equilibrium method (TEM). Last, the reasonable design value of SAR interference in TEM is verified with the hydraulic parameters test results.

The profile optimization that top-root part of rotor end-face profiles is replaced by elliptical-circular arcs (ECA) makes the transition area of tooth-top and tooth-root connect smoother than before. The reasonable interference of SAR in TEM is almost 0.16mm~0.22mm to ensure better sealing performance. Through the hydraulic test, the interference positive fluctuation or the number of SAR head reduces increase (starting-pressure-drop) SPD while negative fluctuations by contraries. Meanwhile, DF penetration also decreases the revolution speed with the SAR interference decreases. The less SAR head revolution speed is always below the more with the constant driving power and DF hydraulic drop. Ultimately, decreasing in overall-efficiency occurs for larger fluctuation of interference or or less interference among SAR.

The line type optimization and analysis in TEM for CHSM improves the motor seal and output performance, also has important application values simultaneously.

The purpose of this paper is to quantify the influence of alternating current (AC) interference on hydrogen evolution reaction of X80 steel.

The hydrogen evolution potential was obtained by cathodic potentiodynamic polarization curve. The instantaneous potential under AC interference was obtained by high-frequency acquisition with three-electrode system. Electrochemical impedance spectroscopy and Tafel polarization curves were used to study the influence mechanism of AC interference on instantaneous potential.

It was concluded that the hydrogen evolution reaction could occur on X80 steel under AC interference. There were critical AC current densities of about 100 to 200 A/m2, beyond which the cathode reaction of X80 steel changed from oxygen absorption to hydrogen evolution. Besides the pH value, the initial polarization potential EZ and impedance module of the steel/electrolyte interface under AC interference were also the factors that affected the critical AC densities in different solutions.

This research quantified the hydrogen evolution capacity of X80 steel under AC interference, which could be applied to clear the effect of AC interference on hydrogen evolution reaction.

Part‐list interference occurs when reading a few items from a previously viewed list interferes with recall of the remaining items. The purpose of this study is to examine if the review of an incomplete flowchart, following the review of a complete narrative, interferes with auditors’ recall and evaluation of internal control information. The potential interaction between auditors’ internal control knowledge and the extent of part‐list interference is also investigated. The results indicate there was a significant interaction between knowledge and part‐list interference, suggesting that interference related to an incomplete flowchart occurred primarily with less knowledgeable auditors. Therefore, higher levels of knowledge may reduce interference when recall cues are organized schematically, as found in flowcharts.

To examine the relative power of four dispositional, self‐evaluation traits (adaptive and maladaptive perfectionism, generalized self‐efficacy, and general self‐esteem) versus three situational factors (organizational time demands, potential negative career consequences, and managerial support) in predicting work interference with home (WIH) and home interference with work (HIW).

A survey was conducted among 223 UK public sector employees. Hierarchical multiple regression analysis tested main effects of personality and situational characteristics on WIH and HIW. A usefulness analysis determined whether dispositional or situational variables had greater predictive power for the two dependent variables.

Significant, negative main effects of adaptive perfectionism on HIW, and of self‐esteem on WIH. Positive relationships were found between maladaptive perfectionism and both WIH and HIW. Situational factors were also significant predictors of WHI: organizational time demands were positively associated with WIH, while managerial support had a negative relationship with WIH. Dispositional variables accounted for 15 per cent of variance in HIW, but only 4 per cent of variance in WIH.

The cross‐sectional design of the study does not permit firm conclusions regarding causality, and the results may be influenced by common method bias.

Raising awareness of the role of personality in work‐home interference may assist managers in providing more effective support to employees. The danger exists that policy‐makers will dismiss HIW as an individual responsibility due to the influence of dispositional factors.

This study indicates that self‐evaluation personality characteristics play a key role in predicting HIW, and are more important than traditionally investigated factors associated with the home and workplace environments.

THE term interference in its aerodynamic sense is generally associated with an effect that spoils the performance of an aeroplane mainly by increasing its drag at a given lift. While there are good grounds for this outlook, it is of some importance to remember that it by no means represents the whole truth. Interference effects are not confined solely to changes of drag or lift: they often play a material part in many other properties of a complete aeroplane such as its stability, its spinning properties and in the phenomenon known as buffeting. Further, it is not correct to assume that interference always works against the designer; it may quite well assist him in certain cases, and the better he understands its causes the more chance he has of designing combinations having favourable interference.

The turn of the twenty-first century witnessed significant shifts in the global work environment that led to employees’ personal and professional lives witnessing dynamic transformations. Work-life interference has become the norm rather than the exception for most employees, who, of late, experience more significant interference in balancing work obligations and family responsibilities. This study aims to examine the bi-directional interference experienced by working women in India’s health-care sector.

For this study, 850 questionnaires were distributed to selected health-care workers in Northern India. After eliminating the invalid questionnaires, 782 valid questionnaires were retained and used for further analyzes.

The study results revealed that working women in a collectivistic culture such as India experience higher work interference on personal life than personal life interference on work in the health sector. However, women health-care workers with higher support from their employers, families and colleagues experienced lower interference levels. Therefore, health organizations need to put a system in place to ensure the least interference in women employees’ personal lives by providing both emotional and institutional support.

This study undertakes to conceptualize the bidirectional nature of the work-life interface among India’s health-care workers. The findings would direct employers, employees and the practitioners involved in the health-care sector to execute policies and practices that attempt to facilitate work-life integration among the workers and generate positive organizational outcomes.

The purposes of the study were (1) to examine whether directional dominance between co-existing athlete brands and sponsor brands exists; (2) to explore whether directional dominance influences consumers' memory interference; and (3) to test whether brand interference interacts with directional dominance among brands to influence consumer evaluation and behaviors under multiple endorsement and sponsorship portfolios.

The research is a 3 (directional dominance: symmetric dominance vs. asymmetric dominance with existing vs. asymmetric dominance with newly endorsed brand) x 2 (brand memory interference: interference vs. no interference) between-subjects factorial design.

The results indicate that (1) directional dominance influenced consumer brand interference, and directional dominance interacted with brand interference on (2) brand evaluation and (3) purchase intention in multiple brand portfolios.

Considering that conventional single-sponsor sponsorship or single-endorser endorsement portfolios are increasingly rare, research on concurrent circumstances of multiple endorsers and multiple endorsed brands in multiple brand portfolios was necessary. By expanding and reconceptualizing the context of brand networks, this study provides empirical evidence on how the dominance and directionality between endorser and (existing and newly) endorsed brands—an athlete endorser's strong pre-existing association with an existing endorsed brand in particular—influenced consumer brand interference and the brand evaluation in multiple brand portfolios.