Search results

The Government’s investment in infrastructure projects is considerably high, especially in bridge construction projects. Government authorities must establish an initial forecasted budget to have transparency in transactions. Early cost estimating is challenging for Quantity Surveyors due to incomplete project details at the initial stage and the unavailability of standard cost estimating techniques for bridge projects. To mitigate the difficulties in the traditional preliminary cost estimating methods, there is a requirement to develop a new initial cost estimating model which is accurate, user friendly and straightforward. The research was carried out in Sri Lanka, and this paper aims to develop the artificial neural network (ANN) model for an early cost estimate of concrete bridge systems.

The construction cost data of 30 concrete bridge projects which are in Sri Lanka constructed within the past ten years were trained and tested to develop an ANN cost model. Backpropagation technique was used to identify the number of hidden layers, iteration and momentum for optimum neural network architectures.

An ANN cost model was developed, furnishing the best result since it succeeded with around 90% validation accuracy. It created a cost estimation model for the public sector as an accurate, heuristic, flexible and efficient technique.

The research contributes to the current body of knowledge by providing the most accurate early-stage cost estimate for the concrete bridge systems in Sri Lanka. In addition, the research findings would be helpful for stakeholders and policymakers to propose policy recommendations that positively influence the prediction of the most accurate cost estimate for concrete bridge construction projects in Sri Lanka and other developing countries.

Bisphosphonate (BP) medications can be applied to prohibit the damage of bone density and the remedy of bone illnesses such as osteoporosis. As the metal chelating of phosphonate groups are nearby large with six O atoms possessing the high negative charge, these compounds are active toward producing the chelated complexes through drug design method. BP agents have attracted much attention for the clinical treatment of some skeletal diseases depicted by enhancing of osteoclast-mediated bone resorption.

In this work, it has been accomplished the CAM-B3LYP/6–311+G(d, p)/LANL2DZ to estimate the susceptibility of SWCNT for adsorbing alendronate, ibandronate, neridronate and pamidronate chelated to two metal cations of 2Mg²⁺, 2Ca²⁺, 2Sr²⁺ through nuclear magnetic resonance and thermodynamic parameters. Therefore, the data has explained that the feasibility of using SWCNT and BP agents becomes the norm in metal chelating of drug delivery system which has been selected through alendronate → 2X, ibandronate → 2X, neridronate → 2X and pamidronate → 2X (X = Mg²⁺/Ca²⁺/Sr²⁺) complexes.

The thermodynamic results have exhibited that the substitution of 2Ca²⁺ cation by 2Sr²⁺ cation in the structure of bioactive glasses can be efficient for treating vertebral complex fractures. However, it has been observed the most fluctuation in the Gibbs free energy for BPs → 2Sr²⁺ at 300 K. Furthermore, Monte Carlo simulation has resulted by increasing the dielectric constant in the aqueous medium can enhance the stability and efficiency of BP drugs for preventing the loss of bone density and treating the osteoporosis.

According to this research, by incorporation of chelated 2Mg²⁺, 2Ca²⁺ and 2Sr²⁺ cations to BP drugs adsorbed onto (5, 5) armchair SWCNT, the network compaction would increase owing to the larger atomic radius of Sr²⁺ cation rather than Ca²⁺ and Mg²⁺, respectively.

Due to the miniaturization of electronic devices, the increased current density through solder joints leads to the occurrence of electromigration failure, thereby reducing the reliability of electronic devices. The purpose of this study is to propose a finite element-artificial neural network method for the prediction of temperature and current density of solder joints, and thus provide reference information for the reliability evaluation of solder joints.

The temperature distribution and current density distribution of the interconnect structure of electronic devices were investigated through finite element simulations. During the experimental process, the actual temperature of the solder joints was measured and was used to optimize the finite element model. A large amount of simulation data was obtained to analyze the neural network by varying the height of solder joints, the diameter of solder pads and the magnitude of current loads. The constructed neural network was trained, tested and optimized using this data.

Based on the finite element simulation results, the current is more concentrated in the corners of the solder joints, generating a significant amount of Joule heating, which leads to localized temperature rise. The constructed neural network is trained, tested and optimized using the simulation results. The ANN 1, used for predicting solder joint temperature, achieves a prediction accuracy of 96.9%, while the ANN 2, used for predicting solder joint current density, achieves a prediction accuracy of 93.4%.

The proposed method can effectively improve the estimation efficiency of temperature and current density in the packaging structure. This method prevails in the field of packaging, and other factors that affect the thermal, mechanical and electrical properties of the packaging structure can be introduced into the model.

With the rapid advancement in the automotive industry, the friction coefficient (FC), wear rate (WR) and weight loss (WL) have emerged as crucial parameters to measure the performance of automotive braking systems, so the FC, WR and WL of friction material are predicted and analyzed in this work, with an aim of achieving accurate prediction of friction material properties.

Genetic algorithm support vector machine (GA-SVM) model is obtained by applying GA to optimize the SVM in this work, thus establishing a prediction model for friction material properties and achieving the predictive and comparative analysis of friction material properties. The process parameters are analyzed by using response surface methodology (RSM) and GA-RSM to determine them for optimal friction performance.

The results indicate that the GA-SVM prediction model has the smallest error for FC, WR and WL, showing that it owns excellent prediction accuracy. The predicted values obtained by response surface analysis are closed to those of GA-SVM model, providing further evidence of the validity and the rationality of the established prediction model.

The relevant results can serve as a valuable theoretical foundation for the preparation of friction material in engineering practice.

To examine the development of research into the relationship between business process outsourcing (BPO) and innovation, a bibliometric methodology utilizing quantitative analytical methodologies was used. With the aid of a visualization analysis of scientific publications, this study also assessed the state of BPO and innovation practices.

Using the Web of Science database, articles on BPO and innovation that published between 1992 and 2022 were retrieved. Records that had been extracted were examined in terms of publication year, nation, journal, subject area, authors and affiliations with organizations. The research on acupuncture for pain relief was visualized using the VOSviewer application.

An analysis of 219 original and review papers found that during the past 30 years, the overall number of publications has fluctuated constantly. The London University, the Copenhagen Business School and the London School of Economics were the institutions that produced the most articles in this topic. The three main categories of research that emerged from a network analysis based on the co-occurrence of keywords are innovation, outsourcing and performance.

A BP-innovation model must be created, and BPO must go beyond operational duties to incorporate management-wide shared strategic decisions in order to ensure improved performance of the firms. BPO enables a company's management to share knowledge and expertise about the strategic difficulties of outsourcing. A variety of technological and non-technological resources must also be considered when integrating an information technology (IT) infrastructure into BPO decisions in order to achieve greater performance.

Validity of the paper can be justified by it contribution to the existing knowledge. First, linking BPO and innovation – by integrating the arguments of various academics, the study unifies the disparate components and contentious discussions in the relationship between BPO and innovation. Second, this study highlights a research trend, significant studies, relevant terms and concepts in the real world. Third, the study provides future researchers with a tip for statistically analyzing BPO, particularly in light of innovation.

In the COVID-19 era, sign language (SL) translation has gained attention in online learning, which evaluates the physical gestures of each student and bridges the communication gap between dysphonia and hearing people. The purpose of this paper is to devote the alignment between SL sequence and nature language sequence with high translation performance.

SL can be characterized as joint/bone location information in two-dimensional space over time, forming skeleton sequences. To encode joint, bone and their motion information, we propose a multistream hierarchy network (MHN) along with a vocab prediction network (VPN) and a joint network (JN) with the recurrent neural network transducer. The JN is used to concatenate the sequences encoded by the MHN and VPN and learn their sequence alignments.

We verify the effectiveness of the proposed approach and provide experimental results on three large-scale datasets, which show that translation accuracy is 94.96, 54.52, and 92.88 per cent, and the inference time is 18 and 1.7 times faster than listen-attend-spell network (LAS) and visual hierarchy to lexical sequence network (H2SNet) , respectively.

In this paper, we propose a novel framework that can fuse multimodal input (i.e. joint, bone and their motion stream) and align input streams with nature language. Moreover, the provided framework is improved by the different properties of MHN, VPN and JN. Experimental results on the three datasets demonstrate that our approaches outperform the state-of-the-art methods in terms of translation accuracy and speed.

This paper establishes a quality model for automation assembly of range hood impeller based on generalized grey relational degree, it improves the debugging efficiency of the newly developed assembly workstation.

First, spot check the trial production impellers and obtain three indexes that reflect the assembly quality of the impellers. Then, analyze the parameters that affect the assembly quality of the impeller using grey relational analysis (GRA), establish a model for the assembly quality of the range hood impeller based on the generalized grey relational degree and identify the main parameters. After that, analyze the transmission structure of automation assembly workstation, identify the reasons that affect parameters and propose improvement plans. Finally, a trial production is conducted on the automation assembly workstation after adopting the improved plan to verify the quality model of impeller automation assembly.

The research shows that compared to manual assembly, the automation assembly quality of the impeller using GRA model has been improved, shortening the debugging cycle of the newly developed assembly workstation.

The newly developed automation equipment will have some problems in the trial production stage, which often rely on the experience of engineers for debugging. In this paper, the automation assembly quality model of range hood impeller based on GRA is established, which can not only ensure the quality of finished impeller but also shorten the debugging cycle of the equipment. In addition, GRA can be widely used in the commissioning of other automation equipment.

This study has developed a set of impeller automation assembly workstation. The debugging method in the trial production stage is beneficial to shorten the trial production time and improve the economic benefits.

This study aims to examine the extent to which external auditors (EAs) use the work of the internal audit function (IAF) based on the purpose of its primary activities. The authors rely on attribution theory, which suggests that individuals search for meaning when an event occurs. In this setting, the authors explore how the overall (assurance vs advisory) or specific (e.g. risk management and evaluating internal controls) focus of IAF activities influences perceived EA reliance on the IAF’s work.

The authors first explore the research question with data extracted from a broad, longitudinal survey conducted triennially by the national chapters of the Institute of Internal Auditors in Austria, Germany and Switzerland. The data includes responses from 2014, 2017 and 2020 administrations of the survey. The authors conduct a parallel survey with practicing EAs attending two training sessions of a European office of a global network firm. Hypotheses were tested using ordered logistic regression.

Among the chief audit executive (CAE) participants, the authors observe that a balanced or primarily assurance-related purpose of the IAF, relative to a primarily advisory-related purpose, is associated with higher perceived EA reliance. The authors observe similar perceptions of the extent of reliance among the EA participants.

With a unique data set of practicing internal auditors from three countries, coupled with a sample of EAs, to the best of the authors’ knowledge, this study is the first to examine differences in EA reliance across the IAF’s primary roles. The study relies on data from three European countries, which differs from prior EA reliance literature with a largely North American focus. Further, comparison between perceptions of EAs and CAEs is a novel approach and this paper’s findings suggest that perceptions of CAEs could be a reliable proxy for EA-intended behavior.

This paper aims to analyze the research highlights, evolutionary process and future research directions in the field of tourism forecasting.

This study used CiteSpace to conduct a bibliometric analysis of 1,213 tourism forecasting articles.

The results show that tourism forecasting research has experienced three stages. The institutional collaboration includes transnational collaboration and domestic institutional collaboration. Collaboration between countries still needs to be strengthened. The authors’ collaboration is mainly based on on-campus collaboration. Articles with high co-citation are primarily published in core tourism journals and other relevant publications. The research content mainly pertains to tourism demand, revenue management, hotel demand and tourist volumes. Ex ante forecasting during the COVID-19 pandemic has broadened existing tourism forecasting research. The future forecasting research focuses on the rational use of big data, improving the accuracy of models and enhancing the credibility of forecasting results.

This paper uses CiteSpace to analyze tourism forecasting articles to obtain future research trends, which supplements existing research and provides directions for future research.

本文旨在分析旅游预测领域的研究重点、演化过程和未来的研究方向。

本研究使用 CiteSpace 软件对 1213 篇旅游预测文章进行了文 献计量学分析。

结果表明, 旅游预测研究经历三个阶段。机构合作包含国际机构合作和 国内机构合作, 需要持续加强国家之间的合作, 作者之间的合作多以校内合作为 主。高引用文章不仅发表在旅游领域的核心期刊还发表在其他专业的核心期刊上。 旅游预测研究的主要内容为旅游需求、收入管理、酒店需求和游客量。新冠疫情 期间的事前预测拓宽了现有的旅游预测研究。未来预测的研究重点在于合理利用 大数据, 提高模型的准确定以及提高预测结果的可信度。

本文使用 CiteSpace 分析旅游预测文章得到未来研究趋势, 既是对 现有研究的补充, 又为今后的研究提供方向。

Este artículo pretende analizar los aspectos más destacados de la investigación, el proceso evolutivo y las futuras orientaciones de la investigación en el campo de la previsión turística.

Este estudio utilizó CiteSpace para realizar un análisis bibliométrico de 1213 artículos sobre previsión turística.

Los resultados muestran que la investigación sobre previsión turística ha experimentado tres etapas. La colaboración institucional incluye la colaboración transnacional y la colaboración institucional nacional. La colaboración entre países aún debe reforzarse. La colaboración entre autores se basa principalmente en la colaboración dentro del campus. Los artículos con una alta cocitación se publican principalmente en las principales revistas de turismo y en otras publicaciones relevantes. El contenido de la investigación se refiere principalmente a la demanda turística, el revenue management, la demanda hotelera y los volúmenes turísticos. La previsión previa y durante la pandemia de la COVID-19 ha ampliado la investigación existente sobre previsión turística. La futura investigación sobre previsiones se centra en el uso racional de los big data, la mejora de la precisión de los modelos y el aumento de la credibilidad de los resultados de las previsiones.

Este artículo utiliza CiteSpace para analizar artículos de previsión turística con el fin de obtener futuras tendencias de investigación, lo que complementa la investigación existente y proporciona orientaciones para futuras investigaciones.

The purpose of this study is to introduce the top-level design ideas and the overall architecture of earthquake early-warning system for high speed railways in China, which is based on P-wave earthquake early-warning and multiple ways of rapid treatment.

The paper describes the key technologies that are involved in the development of the system, such as P-wave identification and earthquake early-warning, multi-source seismic information fusion and earthquake emergency treatment technologies. The paper also presents the test results of the system, which show that it has complete functions and its major performance indicators meet the design requirements.

The study demonstrates that the high speed railways earthquake early-warning system serves as an important technical tool for high speed railways to cope with the threat of earthquake to the operation safety. The key technical indicators of the system have excellent performance: The first report time of the P-wave is less than three seconds. From the first arrival of P-wave to the beginning of train braking, the total delay of onboard emergency treatment is 3.63 seconds under 95% probability. The average total delay for power failures triggered by substations is 3.3 seconds.

The paper provides a valuable reference for the research and development of earthquake early-warning system for high speed railways in other countries and regions. It also contributes to the earthquake prevention and disaster reduction efforts.