Search results

Improving productivity and efficiency has always been crucial for industrial companies to remain competitive. In recent years, the topic of environmental impact has become increasingly important. Published research indicates that environmental and economic goals can enforce or rival each other. However, few papers have been published that address the interaction and integration of these two goals.

In this paper, we identify both, synergies and trade-offs based on a systematic review incorporating 66 publications issued between 1992 and 2021. We analyze, quantify and cluster examples of conjunctions of ecological and economic measures and thereby develop a framework for the combined improvement of performance and environmental compatibility.

Our findings indicate an increased significance of a combined consideration of these two dimensions of sustainability. We found that cases where enforcing synergies between economic and ecological effects were identified are by far more frequent than reports on trade-offs. For the individual categories, cost savings are uniformly considered as the most important economic aspect while, energy savings appear to be marginally more relevant than waste reduction in terms of environmental aspects.

No previous literature review provides a comparable graphical treatment of synergies and trade-offs between cost savings and ecological effects. For the first time, identified measures were classified in a 3 × 3 table considering type and principle.

This study examines the impact of China’s mixed-ownership reform on the innovation of non-state-owned acquirers, with a particular focus on the impact on firms with high financing constraints, low-quality accounting information or less tangible assets.

We use a proprietary dataset of firms listed on the Shanghai and Shenzhen Stock Exchanges to investigate the impact of mixed ownership reform on non-state-owned enterprise (non-SOE) innovation. We employ regression analysis to examine the association between mixed ownership reform and firm innovation.

The study finds that non-state-owned firms can improve innovation by acquiring equity in state-owned enterprises (SOEs) under the reform. Eased financing constraints, lowered financing costs, better access to tax incentives or government subsidies, lowered agency costs, better accounting information quality and more credit loans are underlying the impact. Additionally, cross-ownership connections amongst non-SOE executives and government intervention strengthen the impact, whilst regional marketisation weakens it.

This study adds to the literature on the association between mixed ownership reform and firm innovation by focussing on the conditions under which this impact is stronger. It also sheds light on the policy implications for SOE reforms in emerging economies.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

There is an ongoing challenge to map the efficacy of e-retailing strategies in building both value co-creation opportunities for online customers and customer value for companies. Based on the service-dominant (S-D) logic, an integrative model is provided that connects the impact of convenience and personalisation strategies (CPSs) on an e-retailer's performance – by offering co-creation opportunities and customer engagement.

The survey instrument is validated and the model is tested with data from active online customers using a novel methodology that blends artificial neural network (ANN) analysis with partial least squares (PLS) in both the measurement model and the path analysis.

The findings robustly support the model and yield evidence of the contribution of CPSs in effective value propositions, the interface between the S-D logic and customer engagement, and the direct effect of customer engagement on tangible forms of value for companies.

This study is the first scholarly effort to provide a comprehensive understanding of how and why CPSs can maximise customer value for the e-retailer, while simultaneously testing the customer value/engagement interface with a new blended ANN-PLS method.

The purpose of this study is to examine the relationship between the corporate social responsibility (CSR) performance of job-hopping executives at their former and subsequent firms.

We conduct regression analyses using a sample of firms listed on the Shanghai and Shenzhen Stock Exchanges from 2010 to 2020 to examine whether CSR performance is similar from one firm to the next as executives switch jobs.

We find a positive relationship between the CSR performance of former and subsequent firms under job-hopping executives. This relationship is the strongest in the year of the job switch; it weakens in the second year and eventually disappears in the third year. In addition, we show that this relationship benefits different CSR stakeholder groups and is contingent on executive and subsequent firm attributes and job-hopping characteristics. Furthermore, we demonstrate that firms that hire a new chief executive officer from a firm with a strong track record in CSR, the new firm experiences a significant surge in CSR performance compared with firms that do not experience such a shock.

This study has implications for executive hiring decisions.

This study extends the understanding of CSR determinants through the lens of inter-organisational ties associated with job-hopping executives.

The primary purpose of this study is to investigate the influence of tourists' perceived value, satisfaction and behavioral intention on the development of Lipu Yi costume culture to promote the development of intangible cultural tourism and better construct a model of the influencing factors of Lipu Yi costumes in the development of intangible cultural heritage tourism.

The study site is the intangible cultural district of Panzhihua, Sichuan Province, China. This study examines the interrelationships between tourists' perceived value of experience, behavioral intention and satisfaction as the tourists relate to Lipu Yi costume and intangible cultural heritage tourism. A sample of 225 tourists who had visited Panzhihua at least once was selected for the study.

All seven of the survey's hypotheses were supported. Therefore, this study concludes that tourists' perceived value, satisfaction and behavioral intention directly affect the development of intangible cultural tourism and significantly positively impact the growth of Lipu Yi costumes culture. Descriptive analysis, confirmatory factor analysis (CFA) and structural equation modeling (SEM) investigation methods were used.

This paper analyzes tourists' perceived value of Lipu costume culture and tourists' satisfaction and behavioral intention during the tourism process. This study provides a more in-depth understanding of the relationship between Lipu Yi costume and non-heritage tourism factors. Practical methods and approaches are sought to further develop Lipu Yi costume non-heritage tourism.

The purpose of this study is to investigate the recovery and resilience tourism strategies and possible future development of four main Chinese tourism cities.

The authors collected data from the official accounts of tourism administrations of these cities, tourist attractions and opinions from media and newspapers in Sina Weibo platform. The authors adopted an inductive approach in observing relevant social media posts and applied content analysis to identify main China’s tourism prevention and recovery strategies.

During the mass pandemic infection period, top-down prevention and control measures were implemented by the Chinese central and local governments, with feasible and regional recovery policies and protocols being adapted according to local situations. Measures related to tourism industrial re-employment, improvement of international images and governmental financial supports to re-boost local tourism in Chinese cities were paid great attention. Digitalization, close-to-nature and cultural heritages became important factors in the future development of China’s tourism. Dark tourism, as a potential tourism recovery strategy, also obtained huge emergence, for the memory of people deceased in the pandemic and for the inheritance of national patriotism.

This study enriches the current literature in urban tourism recovery studies analyzing the specific case of Chinese tourism cities and fulfill some voids of previous research mostly focused on the first wave of the pandemic and the recovery strategies mainly of Western cities. It also provides valuable suggestions to tourism practitioners, destinations and urban cities in dealing with regional tourism recession and finding possible solutions for the scenario associated to the COVID-19 and other similar health crisis.

Global climate change speeds up ice melting and increases flooding incidents. China launched a sponge city policy as a holistic nature-based solution combined with urban planning and development to address flooding due to climate change. Using Weibo analytics, this paper aims to study public perceptions of sponge city.

This study collected 53,586 sponge city contents from Sina Weibo via Python. Various artificial intelligence tools, such as CX Data Science of Simply Sentiment, KH Coder and Tableau, were applied in the study.

76.8% of public opinion on sponge city were positive, confirming its positive contribution to flooding management and city branding. 17 out of 31 pilot sponge cities recorded the largest number of sponge cities related posts. Other cities with more Weibo posts suffered from rainwater and flooding hazards, such as Xi'an and Zhengzhou.

To the best of the authors’ knowledge, this study is the first to explore the public perception of sponge city in Sina Weibo.

The purpose of this review is to comprehensively consider the material properties and processing of additive titanium alloy and provide a new perspective for the robotic grinding and polishing of additive titanium alloy blades to ensure the surface integrity and machining accuracy of the blades.

At present, robot grinding and polishing are mainstream processing methods in blade automatic processing. This review systematically summarizes the processing characteristics and processing methods of additive manufacturing (AM) titanium alloy blades. On the one hand, the unique manufacturing process and thermal effect of AM have created the unique processing characteristics of additive titanium alloy blades. On the other hand, the robot grinding and polishing process needs to incorporate the material removal model into the traditional processing flow according to the processing characteristics of the additive titanium alloy.

Robot belt grinding can solve the processing problem of additive titanium alloy blades. The complex surface of the blade generates a robot grinding trajectory through trajectory planning. The trajectory planning of the robot profoundly affects the machining accuracy and surface quality of the blade. Subsequent research is needed to solve the problems of high machining accuracy of blade profiles, complex surface material removal models and uneven distribution of blade machining allowance. In the process parameters of the robot, the grinding parameters, trajectory planning and error compensation affect the surface quality of the blade through the material removal method, grinding force and grinding temperature. The machining accuracy of the blade surface is affected by robot vibration and stiffness.

This review systematically summarizes the processing characteristics and processing methods of aviation titanium alloy blades manufactured by AM. Combined with the material properties of additive titanium alloy, it provides a new idea for robot grinding and polishing of aviation titanium alloy blades manufactured by AM.

This paper aims to design an active shock absorber scheme for use in conjunction with a passive shock absorber to suppress the horizontal vibration of elevator cars in a smaller range and shorter time. The developed active shock absorber will also improve the safety and comfort of passengers driving in ultra-high-speed elevators.

A six-degree of freedom dynamic model is established according to the position and condition of the car. Then the active shock absorber and disturbance compensation-based adaptive control scheme are designed and simulated in MATLAB/Simulink. The results are analysed and compared with the traditional shock absorber.

The results show that, compared with traditional spring-based passive damping systems, the designed active shock absorber can reduce vibration displacement by 60%, peak acceleration by 50% and oscillation time by 2/3 and is more robust to different spring stiffness, damping coefficient and load.

The developed active shock absorber and its control algorithm can significantly reduce vibration amplitude and converged time. It can also adjust the damping strength according to the actual load of the elevator car, which is more suitable for high-speed elevators.