Search results

The purpose of this paper is to investigate the process of fused filament fabrication (FFF) of a compliant gripper (CG) using thermoplastic polyurethane (TPU) material. The paper studies the applicability of different CG designs and the efficiency of some design parameters.

After reviewing a number of different papers, two designs were selected for a number of exploratory experiments. Using design of experiments (DOE) techniques to identify important design parameters. Finally, the efficiency of the parts was investigated.

The research finds that a simpler design sacrifices some effectiveness in exchange for a remarkable decrease in production cost. Decreasing infill percentage of previous designs and 3D printing them, out of TPU, experimenting with different parameters yields functional products. Moreover, the paper identified some key parameters for further optimization attempts of such prototypes.

The cost of conducting FFF experiments for TPU increases dramatically with product size, number of parameters studied and the number of experiments. Therefore, all three of these factors had to be kept at a minimum. Further confirmatory experiments encouraged.

This paper addresses an identified need to investigate applications of FFF and TPU in manufacturing functional efficient flexible mechanisms, grippers specifically. While most research focused on designing for increased performance, some research lacks discussion on design philosophy, as well as manufacturing issues. As the needs for flexible grippers vary from high-performance grippers to lower performance grippers created for specific functions/conditions, some effectiveness can be sacrificed to reduce cost, reduce complexity and improve applicability in different robotic assemblies and environments.

This study aims to propose and demonstrate a practical application of a new three-part holistic sensory evaluation (HSE) method for textiles and apparel based on the senses of sight, touch, hearing and smell. HSE method development was carefully documented, described and successfully applied to evaluate sensory characteristics and consumer perceptions and acceptance of bacterial cellulose (BC), a novel sustainable material for apparel.

In Part One of the HSE method, research participants described the material in their own words based on the senses of sight, touch, hearing and smell. In Part Two, they rated the intensities and their linking for 25 predetermined attributes describing BC. Part Three measured participants’ overall liking of BC and its perceived suitability for apparel and accessories.

Application of the HSE method resulted in an in-depth understanding of BC material. Areas for material improvements and positive characteristics were identified, providing direction for further development. Consumers found BC suitable for accessories and outer-layer garments but not for apparel.

Sensory evaluation of textiles and apparel has traditionally focused on the senses of touch and sight. The new HSE method allows evaluating the full range of sensory characteristics of materials/products and holistically assessing consumer perceptions. The method is especially useful for novel materials and wearable technology. BC has gained increased interests as a novel sustainable material, yet consumer studies have been lacking. This study reports a comprehensive evaluation of BC material from consumer perspective.

This study aims to identify and analyse the gains and strains associated with flexible working practices (FWPs) introduced and adopted prior to and during the pandemic and consider how these experiences are likely to shape the future of workplace flexibility post-pandemic.

A case study research strategy was adopted to explore the FWPs implemented by a state-owned organisation in the Chinese publishing industry. A mixed data collection method was used. Quantitative data was collected from 50 valid questionnaires, which was followed by 7 qualitative interviews to gain rich insights into the availability and effectiveness of various FWPs and associated benefits and drawbacks.

While the results confirm positive effects FWPs have on employee engagement and retention and on business continuity and employee well-being during the pandemic, the empirical analysis highlights the performance-driven patterns in use and impacts of some FWPs, which caused concerns and dilemmas. Besides the increasing intense market competition, the changing face of state-owned enterprises and managerial attitudes have been found to have significant effects on the use of FWPs.

This paper has contributed to a better understanding of flexible working in an under-researched setting, reflected in changes before and during the pandemic, offering an insight into the commercialised nature of flexible working in the Chinese context. It has implications for organisations and HR practitioners as they envision future workplace flexibility.

The study aims to provide a critical review of the extent to which digital technologies are likely to replace human labour, the exponential rise in the amount of work to be done and how far distinctively human skills are future-proofed and therefore likely to be in short supply. It reviews the evidence for a permanent switch to home and remote working enabled by emerging technologies. It assesses the business, digital and labour strategies of work organisations and the promise and challenges from a dominant trend towards a digitally enabled flexible labour model.

A critical review of 1020 plus case studies and the extant literature was carried out.

The relationship between emerging technologies and work is widely misunderstood, and there are major qualifiers to the idea of an overwhelming tsunami of technology drastically reducing headcounts globally. Distinctive human skills remain valuable, the amount of work to be done is increasing exponentially and automation is becoming more a coping than a labour replacement mechanism. Moves to a hybrid digitalised flexible labour model are promising but not if short-term, and if the challenges they represent are not managed well.

The main limitation is that we are making projections into the future, though we are drawing on a lot of different sources and evidence and past data projected into the future.

The problem is not labour displacement but large skills shortages that will slow down the speed of technology adoption. Skills development is vital, as is the taking of long-term perspectives towards the management of hybrid, flexible working based on human-machine interactions.

Organisations need to revitalise their training and development and labour management models. Governments and intermediary institutions need to manage transition states if the skills required to gain economic growth are to be available, and to ensure that large labour pools do not get bypassed from not having requisite skills.

The study offers a more subtle and complex perspective on the emerging evidence about the future of technology and work.

Advancements in responsive manufacturing have been supporting companies over the last few decades. However, manufacturers now operate in a context of continuous uncertainty. This research paper explores a mechanism where companies can “elastically” provision and deprovision their production capacity, to enable them in coping with repeated disruptions. Such a mechanism is facilitated by the imitability and substitutability of production resources.

An inductive study was conducted using Gioia methodology for this theory generation research. Respondents from 20 UK manufacturing companies across multiple industrial sectors reflected on their experience during COVID-19. Resource-based view and resource dependence theory were employed to analyse the manufacturers' use of internal and external production resources.

The study identifies elastic responses at four operational levels: production-line, factory, company and supply chain. Elastic responses that imposed variable-costs were particularly well-suited for coping with unforeseen disruptions. Further, the imitability and substitutability of manufacturers helped others produce alternate goods during the crisis.

While uniqueness of production capability helps manufacturers sustain competitive advantage against competitors during stable operations, imitability and substitutability are beneficial during a crisis. Successful manufacturing companies need to combine these two approaches to respond effectively to repeated disruptions in a context of ongoing uncertainties. The theoretical contribution is in characterising responsive manufacturing in terms of resource heterogeneity and resource homogeneity, with elastic resourcing as the underlying mechanism.

Accurate and automatic clothing pattern making is very important in personalized clothing customization and virtual fitting room applications. Clothing pattern generating as well as virtual clothing simulation is an attractive research issue both in clothing industry and computer graphics.

Physics-based method is an effective way to model dynamic process and generate realistic clothing animation. Due to conceptual simplicity and computational speed, mass-spring model is frequently used to simulate deformable and soft objects follow the natural physical rules. We present a physics-based clothing pattern generating framework by using scanned human body model. After giving a scanned human body model, first, we extract feature points, planes and curves on the 3D model by geometric analysis, and then, we construct a remeshed surface which has been formatted to connected quad meshes. Second, for each clothing piece in 3D, we construct a mass-spring model with same topological structures, and conduct a typical time integration algorithm to the mass-spring model. Finally, we get the convergent clothing pieces in 2D of all clothing parts, and we reconnected parts which are adjacent on 3D model to generate the basic clothing pattern.

The results show that the presented method is a feasible way for clothing pattern generating by use of scanned human body model.

The main contribution of this work is twofold: one is the geometric algorithm to scanned human body model, which is specially conducted for clothing pattern design to extract feature points, planes and curves. This is the crucial base for suit clothing pattern generating. Another is the physics-based pattern generating algorithm which flattens the 3D shape to 2D shape of cloth pattern pieces.

This study addresses the production optimization of a cellular manufacturing system (CMS) in magnetic production enterprises. Magnetic products and raw materials are more critical to transport than general products because the attraction or repulsion between magnetic poles can easily cause traffic jams. This study needs to address a method to promote the scheduling efficiency of the problem.

To address this problem, this study formulated a mixed-integer linear programming (MILP) model to describe the problem and proposed an auction and negotiation-based approach with a local search to solve it. Auction- and negotiation-based approaches can obtain feasible and high-quality solutions. A local search operator was proposed to optimize the feasible solutions using an improved conjunctive graph model.

Verification tests were performed on a series of numerical examples. The results demonstrated that the proposed auction and negotiation-based approach with a local search operator is better than existing solution methods for the problem identified. Statistical analysis of the experiment results using the Statistical Package for the Social Sciences (SPSS) software demonstrated that the proposed approach is efficient, stable and suitable for solving large-scale numerical instances.

An improved auction and negotiation-based approach was proposed; The conjunctive graph model was also improved to describe the problem of CMS with traffic jam constraint and build the local search operator; The authors’ proposed approach can get better solution than the existing algorithms by testing benchmark instances and real-world instances from enterprises.

This study aims to enrich our understanding of the characteristics of non-urban coworking spaces (CSs) that focus on corporate users, as well as the benefits that companies expect to gain from incorporating those CSs into their corporate real estate (CRE) portfolios.

This study leverages a series of in-depth interviews with owners and managers of CSs in non-urban locales that focus on serving corporate clients.

The research reveals various CS characteristics and forms within non-urban areas, focusing on corporate clients. It suggests that implementing a CS in corporate premises is perceived to enhance CRE use-value strategies with a focus on the employee's well-being, innovation and the attraction of talents. Moreover, exchange-value strategies with a focus on portfolio flexibility may benefit from the implementation of a CS. However, strategies related to life-cycle cost optimization or gains are not perceived to be supported. Social events for the surrounding neighborhood and the choice of location emerge as critical success factors for non-urban CSs. Besides infrastructure and connectivity, non-urban corporate-centric CSs built their location decisions rather on a personal connection to the location and place of residence of potential users than on lower rental prices.

This research pioneers in providing a comprehensive understanding of non-urban CSs, particularly in the context of their perceived implications for corporate real estate management. The nuanced perspectives it offers are invaluable for stakeholders looking to leverage CSs as part of their corporate strategies.

Snap fits are crucial in automotive applications for rapid assembly and disassembly of mating components, eliminating the need for fasteners. This study aims to focus on designing and analyzing serviceable cantilever fit snap connections used in automobile plastic components. Snap fits are classified into permanent and semi-permanent fittings, with permanent fittings having a snap clipping angle between 0° and 5° and semi-permanent fittings having a clipping angle between 15° and 45°. Polypropylene random copolymer is chosen for its exceptional fatigue resistance and elasticity.

The design process includes determining dimensions, computing assembly, disassembly pressures and creating three-dimensional computer-aided design models. Finite element analysis (FEA) is used to evaluate the snap-fit mechanism’s stress, deformation and general functionality in operational scenarios.

The study develops a modified snap-fit mechanism with decreased bending stress and enhanced mating force optimization. The maximum bending stress during assembly is 16.80 MPa, requiring a mating force of 7.58 N, while during disassembly, it is 37.3 MPa, requiring a mating force of 16.85 N. The optimized parameters significantly improve the performance and dependability of the snap-fit mechanism. The results emphasize the need of taking into account both the assembly and disassembly processes in snap-fit design, because the research demonstrates greater forces during disassembly. The approach developed integrates FEA and design for assembly (DFA) concepts to provide a solution for improving the efficiency and reliability of snap-fit connectors in automotive applications.

The research paper’s distinctiveness comes from the fact that it presents a thorough and realistic viewpoint on snap-fit design, emphasizes material selection, incorporates DFA principles and emphasizes the specific requirements of both assembly and disassembly operations. These discoveries may enhance the efficiency, reliability and sustainability of snap-fit connections in plastic automobile parts and beyond. In conclusion, the idea that disassembly needs to be done with a lot more force than installation in a snap-fit design can have a good effect on buzz, squeak and rattle and noise, vibration and harshness characteristics in automobiles.

The construction industry in Nigeria has a complex environment, comprising several combinations of consulting professions, clients, contractual arrangement and investors, with longer working hours than other industries. Work–life balance (WLB) strategies are used to balance professional life and personal life. This study aims to assess the extent of implementation of WLB strategies among construction companies in Lagos, Nigeria.

This study adopts a survey research technique. Snowball sampling technique was adopted to identify the targeted respondents for the administration of questionnaire. A total of 156 questionnaires were distributed and a response rate of 66% (103 questionnaires were completely filled and returned) was attained. Data elicited were analysed using descriptive and inferential statistics.

Results from this study provides evidence that the level of implementation of WLB strategies among construction companies in Lagos state, Nigeria is on the average. The results also revealed organisational understanding, paternity/maternity leave and flexible working arrangement as the top most three WLB strategies implemented among the construction companies in Lagos, Nigeria.

This study contributed to more effective WLB studies by identifying new information on the extent of usage of WLB practices in the Nigerian construction sector as well as offers a fresh perspective on the usage of WLB in a developing country. An understanding of these strategies is significant for companies’ stakeholders, such as management personnel, top construction professionals and policymakers, and for facilitating the adoption and implementation of WLB strategies among construction organisations.