Search results

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

Unconventional machining processes, particularly ultrasonic vibration cutting (UVC), can overcome such technical bottlenecks. However, the precise mechanism through which UVC affects the in-service functional performance of advanced aerospace materials remains obscure. This limits their industrial application and requires a deeper understanding.

The surface integrity and in-service functional performance of advanced aerospace materials are important guarantees for safety and stability in the aerospace industry. For advanced aerospace materials, which are difficult-to-machine, conventional machining processes cannot meet the requirements of high in-service functional performance owing to rapid tool wear, low processing efficiency and high cutting forces and temperatures in the cutting area during machining.

To address this literature gap, this study is focused on the quantitative evaluation of the in-service functional performance (fatigue performance, wear resistance and corrosion resistance) of advanced aerospace materials. First, the characteristics and usage background of advanced aerospace materials are elaborated in detail. Second, the improved effect of UVC on in-service functional performance is summarized. We have also explored the unique advantages of UVC during the processing of advanced aerospace materials. Finally, in response to some of the limitations of UVC, future development directions are proposed, including improvements in ultrasound systems, upgrades in ultrasound processing objects and theoretical breakthroughs in in-service functional performance.

This study provides insights into the optimization of machining processes to improve the in-service functional performance of advanced aviation materials, particularly the use of UVC and its unique process advantages.

ChatGPT, an artificial intelligence (AI)-powered chatbot, has gained substantial attention in the academic world for its potential to transform the education industry. While ChatGPT offers numerous benefits, concerns have also been raised regarding its impact on the quality of education. This study aims to bridge the gap in research by exploring teachers' perspectives on the adoption of ChatGPT, with a focus on identifying factors that motivate and inhibit them to adopt ChatGPT for educational purposes.

This research has employed a interpretative phenomenological analysis (IPA) qualitative approach. Through in-depth interviews among the teachers, data will be collected to identify the motivating and inhibiting factors that impact teachers' willingness to adopt ChatGPT. The data was collected from 34 teachers working across 10 branches of the University of Technology and Applied Sciences (UTAS) in Oman.

The analysis revealed four themes under motivating factors that encourage teachers to adopt ChatGPT for their educational purpose. These include Theme 1: Exploration of innovative education technologies, Theme 2: Personalization teaching and learning, Theme 3: Time-saving and Theme 4: Professional development. On the other hand, inhibiting factors includes five themes which includes Theme 1: Reliability and accuracy concerns, Theme 2: Reduced human interaction, Theme 3: Privacy and data security, Theme 4: lack of institutional support and Theme 5: Overreliance on ChatGPT.

This study contributes to the understanding of teachers' perspectives on the adoption of ChatGPT in education. By understanding teachers' perspectives, policymakers can design appropriate policies and service providers can customize their offerings to meet teachers' requirements. The study's findings will be valuable for higher education institutions (HEIs) in formulating policies to ensure the appropriate and effective utilization of ChatGPT. The study will provide suggestions to ChatGPT service providers, enabling them to focus on motivating factors and address inhibiting factors, thereby facilitating the seamless adoption of ChatGPT among teachers.

In comparison to previous studies, this study goes beyond merely discussing the possible benefits and limitations of ChatGPT in education. This research significantly contributes to the understanding of ChatGPT adoption among teachers by identifying specific motivating and inhibiting factors that influence teachers to adopt ChatGPT for educational purposes. The research enables to gain important new insights that were not previously found, giving a fresh dimension to the existing literature.

The study seeks to understand the possible opportunities that Industry 5.0 might offer for various aspects of inclusive sustainability. The study aims to discuss existing perspectives on the classification of Industry 5.0 technologies and their underlying role in materializing the sustainability values of this agenda.

The study systematically reviewed Industry 5.0 literature based on the PRISMA protocol. The study further employed a detailed content-centric review of eligible documents and conducted evidence mapping to fulfill the research objectives.

The advancement of Industry 5.0 is currently underway, with noteworthy initial contributions enriching its knowledge base. Although a unanimous definition remains lacking, diverse viewpoints emerge concerning the recognition of fundamental technologies and the potential for yielding sustainable outcomes. The expected contribution of Industry 5.0 to sustainability varies significantly depending on the context and the nature of underlying technologies.

Industry 5.0 holds the potential for advancing sustainability at both the firm and supply chain levels. It is envisioned to contribute proportionately to the three sustainability dimensions. However, the current discourse primarily dwells in theoretical and conceptual domains, lacking empirical exploration of its practical implications.

This study comprehensively explores diverse perspectives on Industry 5.0 technologies and their potential contributions to economic, environmental and social sustainability. Despite its promise, the practical evidence supporting the effectiveness of Industry 5.0 remains limited. Certain conditions are necessary to realize the benefits of Industry 5.0 fully, yet the mechanisms behind these conditions require further investigation. In this regard, the study suggests several potential areas for future research.

This study aims to answer the question of how to structure a circular ecosystem for extractive fishing in the Amazon region. It explores possibilities for implementing a circular ecosystem management model in an imperfect market with low technological availability, high informality and limited public assistance.

Qualitative approach was adopted for this paper, with a case study on extractive fishing in the state of Amazonas. Data was collected through 35 interviews and direct observation of the processes of collecting, storing and transporting fish on two routes: Tapauá-Manaus and Manacapuru-Manaus.

Through the data collected, it was possible to observe the importance of an orchestrating agent – such as an association or even a public authority – for the establishment and development of a circular ecosystem for extractive fishing in the region.

The paper makes theoretical contributions by presenting how a circular ecosystem management model could be implemented for an imperfect market in the Global South, as well as contributing to the literature on how the circular economy contributes to mitigate the threat to biodiversity posed by the linear economy.

It contributes to the management practice of structuring circular ecosystems.

The role of public authorities and the collective organization of fishermen as orchestrators connecting the network of actors that develop the extractive fishing ecosystem is fundamental, guaranteeing effective social participation in solving local problems.

The idea of circular ecosystems was applied to imperfect contexts, with high informality, weak institutions and bioeconomy, topics still little explored in the literature.

This paper aims to reflect on the outcomes of a community-based video-conferencing intervention for depression, predating the COVID-19 pandemic. The study investigates the potential implications of its findings for enhancing adherence to digital mental health interventions. The primary objective is to present considerations for researchers aimed at minimising the intention-behaviour gap frequently encountered in digital mental health interventions.

A randomised control feasibility trial design was used to implement a telehealth model adapted from an established face-to-face community-based intervention for individuals clinically diagnosed with depression. In total, 60 participants were initially recruited in association with a local mental health charity offering traditional talking-based therapies with only eight opting to continue through all phases of the project. Modifications aligning with technological advancements were introduced.

However, the study faced challenges, with low uptake observed after an initial surge in recruitment interest. The behaviour-intention gap highlighted technology as a barrier to service accessibility, exacerbated by participant age. Furthermore, the clinical diagnosis of depression, characterised by low mood and reduced interest in activities, emerged as a potential influencing factor.

The limitations of the research include its pre-pandemic execution, during a nascent stage of technological mental health interventions when participants were less familiar with online developments.

Despite these limitations, this study's reflections offer valuable insights for researchers aiming to design and implement telehealth services. Addressing the intention-behaviour gap necessitates a nuanced understanding of participant demographics, diagnosis and technological familiarity.

The study's relevance extends to post-pandemic society, urging researchers to reassess assumptions about technology availability to ensure engagement. This paper contributes to the mental health research landscape by raising awareness of critical considerations in the design and implementation of digital mental health interventions.

Reflections from a pre-pandemic intervention in line with the developments of a post-pandemic society will allow for research to consider that because the technology is available does not necessarily result in engagement.