Search results
1 – 10 of over 4000Michael Wells, Michael Kretser, Ben Hazen and Jeffery Weir
This study aims to explore the viability of using C-17 reduced-engine taxi procedures from a cost savings and capability perspective.
Abstract
Purpose
This study aims to explore the viability of using C-17 reduced-engine taxi procedures from a cost savings and capability perspective.
Design/methodology/approach
This study model expected engine fuel flow based on the number of operational engines, aircraft gross weight (GW) and average aircraft groundspeed. Using this model, the research executes a cost savings simulation estimating the expected annual savings produced by the proposed taxi methodology. Operational and safety risks are also considered.
Findings
The results indicate that significant fuel and costs savings are available via the employment of reduced-engine taxi procedures. On an annual basis, the mobility air force has the capacity to save approximately 1.18 million gallons of jet fuel per year ($2.66m in annual fuel costs at current rates) without significant risk to operations. The two-engine taxi methodology has the ability to generate capable taxi thrust for a maximum GW C-17 with nearly zero risks.
Research limitations/implications
This research was limited to C-17 procedures and efficiency improvements specifically, although it suggests that other military aircraft could benefit from these findings as is evident in the commercial airline industry.
Practical implications
This research recommends coordination with the original equipment manufacturer to rework checklists and flight manuals, development of a fleet-wide training program and evaluation of future aircraft recapitalization requirements intended to exploit and maximize aircraft surface operation savings.
Originality/value
If implemented, the proposed changes would benefit the society as government resources could be spent elsewhere and the impact on the environment would be reduced. This research conducted a rigorous analysis of the suitability of implementing a civilian airline’s best practice into US Air Force operations.
Details
Keywords
Tamara Apostolou, Ioannis N. Lagoudis and Ioannis N. Theotokas
This paper aims to identify the interplay of standard Capesize optimal speeds for time charter equivalent (TCE) maximization in the Australia–China iron ore route and the optimal…
Abstract
Purpose
This paper aims to identify the interplay of standard Capesize optimal speeds for time charter equivalent (TCE) maximization in the Australia–China iron ore route and the optimal speeds as an operational tool for compliance with the International Maritime Organization (IMO) carbon intensity indicator (CII).
Design/methodology/approach
The TCE at different speeds have been calculated for four standard Capesize specifications: (1) standard Capesize with ecoelectronic engine; (2) standard Capesize with non-eco engine (3) standard Capesize vessel with an eco-electronic engine fitted with scrubber and (4) standard Capesize with non-eco engine and no scrubber fitted.
Findings
Calculations imply that in a highly inflationary bunker price context, the dollar per ton freight rates equilibrates at levels that may push optimal speeds below the speeds required for minimum CII compliance (C Rating) in the Australia–China trade. The highest deviation of optimal speeds from those required for minimum CII compliance is observed for non-eco standard Capesize vessels without scrubbers. Increased non-eco Capesize deployment would see optimal speeds structurally lower at levels that could offer CII ratings improvements.
Originality/value
While most of the studies have covered the use of speed as a tool to improve efficiency and emissions in the maritime sector, few have been identified in the literature to have examined the interplay between the commercial and operational performance in the dry bulk sector stemming from the freight market equilibrium. The originality of this paper lies in examining the above relation and the resulting optimal speed selection in the Capesize sector against mandatory environmental targets.
Details
Keywords
Miroslav Šplíchal, Miroslav Červenka and Jaroslav Juracka
This study aims to focus on verifying the possibility of monitoring the condition of a turboprop engine using data recorded by on-board avionics Garmin G1000. This approach has…
Abstract
Purpose
This study aims to focus on verifying the possibility of monitoring the condition of a turboprop engine using data recorded by on-board avionics Garmin G1000. This approach has potential benefits for operators without the need to invest in specialised equipment. The main focus was on the inter-turbine temperature (ITT). An unexpected increase in temperature above the usual value may indicate an issue with the engine. The problem lies in the detection of small deviations when the absolute value of the ITT is affected by several external variables.
Design/methodology/approach
The ITT is monitored by engine sensors and stored by avionics 1× per second onto an SD card. This process generates large amount of data that needs to be processed. Therefore, an algorithm was created to detect the steady states of the engine parameters. The ITT value also depends on the flight parameters and surrounding environment. As a solution to these effects, the division of data into clusters that represent the usual flight profiles was tested. This ensures a comparison at comparable ambient pressures. The dominant environmental influence then remain at the ambient air temperature (OAT). Three OAT compensation methods were tested in this study. Compensation for the standard atmosphere, compensation for the standard temperature of the given flight level and compensation for the speed of the generator, where the regression analysis proved the dependence between the ambient temperature and the speed of the generator.
Findings
The influence of ambient temperature on the corrected ITT values is noticeable. The best method for correcting the OAT appears to be the use of compensation through the revolutions of the compressor turbine NG. The speed of the generator depends on several parameters, and can refine the corrected ITT value. During the long-term follow-up, the ITT differences (delta values) were within the expected range. The tested data did not include the behaviour of the engine with a malfunction or other damage that would clearly verify this approach. Therefore, the engine monitoring will continue.
Practical implications
This study presents a possible approach to turbine engine condition monitoring using limited on board avionic data. These findings can support the development of an engine condition monitoring system with automatic abnormality detection and low operating costs.
Originality/value
This article represent a practical description of problems in monitoring the condition of a turboprop engine in an aircraft with variable flight profiles. The authors are not aware of a similar method that uses monitoring of engine parameters at defined flight levels. Described findings should limit the influence of ambient air pressure on engine parameters.
Details
Keywords
Dimitra Topali and Harilaos N. Psaraftis
The International Maritime Organization has decided that as of 1.1.2020, SOx content in a ship’s emissions should be no more than 0.5 per cent. The purpose of this paper is to…
Abstract
Purpose
The International Maritime Organization has decided that as of 1.1.2020, SOx content in a ship’s emissions should be no more than 0.5 per cent. The purpose of this paper is to address the various challenges expected to arise from the enforcement of the global cap sulfur regulation.
Design/methodology/approach
The authors outline various enforcement options and present a model that calculates the profits from noncompliance in the high seas, so as to help determine the level of fines that could be imposed in case of violation.
Findings
The main finding is that a harmonized system of fines, which are more than potential savings from cheating, would be a strong deterrent for compliance.
Originality/value
To the authors’ knowledge, no paper in the maritime literature on sulfur regulations has focused on enforcement as of yet.
Details
Keywords
Jaeyoung Cha, Juyeol Yun and Ho-Yon Hwang
The purpose of this paper is to analyze and compare the performances of novel roadable personal air vehicle (PAV) concepts that meet established operational requirements with…
Abstract
Purpose
The purpose of this paper is to analyze and compare the performances of novel roadable personal air vehicle (PAV) concepts that meet established operational requirements with different types of engines.
Design/methodology/approach
The vehicle configuration was devised considering the dimensions and operational restrictions of the roads, runways and parking lots in South Korea. A folding wing design was adopted for road operations and parking. The propulsion designs considered herein use gasoline, diesel and hybrid architectures for longer-range missions. The sizing point of the roadable PAV that minimizes the wing area was selected, and the rate of climb, ground roll distance, cruise speed and service ceiling requirements were met. For various engine types and mission profiles, the performances of differently sized PAVs were compared with respect to the MTOW, wing area, wing span, thrust-to-weight ratio, wing loading, power-to-weight ratio, brake horsepower and fuel efficiency.
Findings
Unlike automobiles, the weight penalty of the hybrid system because of the additional electrical components reduced the fuel efficiency considerably. When the four engine types were compared, matching the total engine system weight, the internal combustion (IC) engine PAVs had better fuel efficiency rates than the hybrid powered PAVs. Finally, a gasoline-powered PAV configuration was selected as the final design because it had the lowest MTOW, despite its slightly worse fuel efficiency compared to that of the diesel-powered engine.
Research limitations/implications
Although an electric aircraft powered only by batteries most capitalizes on the operating cost, noise and emissions benefits of electric propulsion, it also is most hampered by range limitations. Air traffic integration or any safety, and noise issues were not accounted in this study.
Practical implications
Aircraft sizing is a critical aspect of a system-level study because it is a prerequisite for most design and analysis activities, including those related to the internal layout as well as cost and system effectiveness analyses. The results of this study can be implemented to design a PAV.
Social implications
This study can contribute to the establishment of innovative PAV concepts that can alleviate today’s transportation problems.
Originality/value
This study compared the sizing results of PAVs with hybrid engines with those having IC engines.
Details
Keywords
S.V. Khandal, T.M. Yunus Khan, Sarfaraz Kamangar, Maughal Ahmed Ali Baig and Salman Ahmed N J
The different performance tests were conducted on diesel engine compression ignition (CI) mode and CRDi engine.
Abstract
Purpose
The different performance tests were conducted on diesel engine compression ignition (CI) mode and CRDi engine.
Design/methodology/approach
The CI engine was suitably modified to CRDi engine with Toroidal re-entrant combustion chamber (TRCC) and was run in dual-fuel (DF) mode. Hydrogen (H2) was supplied at different flow rates during the suction stroke, and 0.22 Kg/h of hydrogen fuel flow rate (HFFR) was found to be optimum. Diesel and biodiesel were used as pilot fuels. The CRDi engine with DF mode was run at various injection pressures, and 900 bar was found to be optimum injection pressure (IP) with 10o before top dead center (bTDC) as fuel injection timing (IT).
Findings
These operating engine conditions increased formation of oxides of nitrogen (NOx), which were reduced by exhaust gas recycle (EGR). With EGR of 15%, CRDi engine resulted in 12.6% lower brake thermal efficiency (BTE), 5.5% lower hydrocarbon (HC), 7.7% lower carbon monoxide (CO), 26% lower NOx at 80% load as compared to the unmodified diesel engine (CI mode).
Originality/value
The current research is an effort to study and evaluate the performance of CRDi engine in DF mode with diesel-H2 and BCPO-H2 fuel combinations with TRCC.
Details
Keywords
As a relatively new computing paradigm, crowdsourcing has gained enormous attention in the recent decade. Its compliance with the Web 2.0 principles, also, puts forward…
Abstract
Purpose
As a relatively new computing paradigm, crowdsourcing has gained enormous attention in the recent decade. Its compliance with the Web 2.0 principles, also, puts forward unprecedented opportunities to empower the related services and mechanisms by leveraging humans’ intelligence and problem solving abilities. With respect to the pivotal role of search engines in the Web and information community, this paper aims to investigate the advantages and challenges of incorporating people – as intelligent agents – into search engines’ workflow.
Design/methodology/approach
To emphasize the role of the human in computational processes, some specific and related areas are studied. Then, through studying the current trends in the field of crowd-powered search engines and analyzing the actual needs and requirements, the perspectives and challenges are discussed.
Findings
As the research on this topic is still in its infancy, it is believed that this study can be considered as a roadmap for future works in the field. In this regard, current status and development trends are delineated through providing a general overview of the literature. Moreover, several recommendations for extending the applicability and efficiency of next generation of crowd-powered search engines are presented. In fact, becoming aware of different aspects and challenges of constructing search engines of this kind can shed light on the way of developing working systems with respect to essential considerations.
Originality/value
The present study was aimed to portrait the big picture of crowd-powered search engines and possible challenges and issues. As one of the early works that provided a comprehensive report on different aspects of the topic, it can be regarded as a reference point.
Details
Keywords
Joanna Grochowalska, Piotr Jaworski, Łukasz Jan Kapusta and Jerzy Kowalski
In the cylinders of a marine diesel engine, self-ignition occurs in a very short time after the fuel injection into the combustion chamber. Therefore, this paper aims to develop a…
Abstract
Purpose
In the cylinders of a marine diesel engine, self-ignition occurs in a very short time after the fuel injection into the combustion chamber. Therefore, this paper aims to develop a model of diesel fuel spray for the early stage of fuel spray in the marine diesel engine. The main technical aspects such as nozzle diameter of the marine engine injector and backpressure in the combustion chamber were taken into consideration.
Design/methodology/approach
In this paper, laboratory experimental studies were carried out to determine parameters of fuel spray in an early stage of injection in the marine diesel engine. The optical measuring Mie scattering technique was used to record the fuel injection process. The working space was a constant volume chamber. The backpressure parameters in the constant volume chamber were the same as during the operation of the marine diesel engine. Based on the experimental studies and important Hiroyasu and Arai models of fuel spray presented in literature was proposed new model of fuel spray parameters for marine diesel injectors.
Findings
In this paper, the proposed new model of the two main parameters described fuel spray evolution”: new model of spray tip penetration (STP) and spray cone angle (SCA). New model propagation of fuel STP in time was included the influence of nozzle diameter and backpressure. The proposed model has a lower error, about 15%–34%, than the model of Hiroyasu and Arai. Moreover, a new model of the evolution over time of the SCA is developed.
Research limitations/implications
In the future research of fuel spray process must be taken influence of the fuel temperature. Diesel fuel has a different density and viscosity in dependence of fuel temperature. Therefore are predicted of the expansion about influence of fuel temperature, new model of fuel spray for a marine diesel engine. The main limitations occurring in the research are not possible to carry out the research while real operation marine diesel engine.
Originality/value
An experimental test was carried out for a real fuel injector of a marine diesel engine. Design parameters and fuel injection parameters were selected on the basis of the actual one. In the literature, SCA is defined as a constant parameter for the specific preliminary data. A new model for the early stage of fuel spray of SCA propagation in time has been proposed. The early stage of fuel spray is especially important, because in this time comes in there to fuel self-ignition.
Details
Keywords