Search results

This paper aims to study the reliability of the high-speed train operation control system in the Chinese Train Control System Level 3 (CTCS-3) operating mode.

Dynamic fault tree and Bayesian network method are adopted to analyze the reliability and weakness of the CTCS-3 system.

First, a physical architecture and data flow diagram of the CTCS-3 system are established according to the typical structure and functions of the CTCS-3 system. Second, the dynamic fault tree of the CTCS-3 system is constructed. Considering the prior probability of the bottom event and the existence of dynamic redundancy, the dynamic fault tree is transformed into a Bayesian net. The reliability of the CTCS-3 system is carried out based on the prior probability and the weakness that affects the reliability of the system based on the posterior probability is also analyzed by the Bayesian network. Finally, it is disclosed that the impact of the on-board subsystem on the reliability of the CTCS-3 system is generally greater than that of the ground subsystem. The two weakest modules in the onboard subsystem are the driver-machine interface (DMI) and balise transmission module (BTM) and the weakest one in the ground subsystem is Balise. The analysis results are generally consistent with the malfunctions in the field operation of China’s high-speed railway.

(1) By reasoning, the reliability of the train operation control system in the CTCS-3 operating mode meets the standard requirements.

(2) Through backward reasoning, it is found that the failure of the onboard subsystem leads to a greater probability of failure of the train control system.

(3) The DMI, BTM and automatic train protection computer unit modules are weak components in the onboard subsystem. Vital digit input&output, train interface unit and train security gateway are rarely involved in previous research, the result in this paper shows that these three modules are also weak components in the subsystem, which requires attention.

An unreliable supply of grid electricity has a strong negative impact on industrial and commercial profitability as well as on household activities and government services that rely on electricity supply. This unreliable grid electricity could be a result of technical and security factors affecting the grid network. Therefore, this study aims to investigate the effects of technical and security factors on the transmission and distribution of grid electricity in Uganda.

This study used the ordinary least squares (OLS) and autoregressive distributed lag (ARDL) models to examine the effects of technical and security factors on grid electricity reliability in Uganda. The study draws upon secondary time series monthly data sourced from the Uganda Electricity Transmission Company Limited (UETCL) government utility, which transmits electricity to both distributors and grid users. Additionally, data from Umeme Limited, the largest power distribution utility in Uganda, were incorporated into the analysis.

The findings revealed that technical faults, failed grid equipment, system overload and theft and vandalism affected grid electricity reliability in the transmission and distribution subsystems of the Ugandan power grid network. The effect was computed both in terms of frequency and duration of power outages. For instance, the number of power outages was 116 and 2,307 for transmission and distribution subsystems, respectively. In terms of duration, the power outages reported on average were 1,248 h and 5,826 h, respectively, for transmission and distribution subsystems.

This paper investigates the effects of technical and security factors on the transmission and distribution grid electricity reliability, specifically focusing on frequency and duration of power outages, in the Ugandan context. It combines both OLS and ARDL models for analysis and adopts the systems reliability theory in the area of grid electricity reliability research.

This article aims to establish a dynamic Energy Performance Contract (EPC) risk allocation model for commercial buildings based on the theory of Incomplete Contract. The purpose is to fill the policy vacuum and allow stakeholders to manage risks in energy conservation management by EPCs to better adapt to climate change in the building sector.

The article chooses a qualitative research approach to depict the whole risk allocation picture of EPC projects and establish a dynamic EPC risk allocation model for commercial buildings in China. It starts with a comprehensive literature review on risks of EPCs. By modifying the theory of Incomplete Contract and adopting the so-called bow-tie model, a theoretical EPC risk allocation model is developed and verified by interview results. By discussing its application in the commercial building sector in China, an operational EPC three-stage risk allocation model is developed.

This study points out the contract incompleteness of the risk allocation for EPC projects and offered an operational method to guide practice. The reasonable risk allocation between building owners and Energy Service Companies can realize their bilateral targets on commercial building energy-saving benefits, which makes EPC more attractive for energy conservation.

Existing research focused mainly on static risk allocation. Less research was directed to the phased and dynamic risk allocation. This study developed a theoretical three-stage EPC risk allocation model, which provided the theoretical support for dynamic EPC risk allocation of EPC projects. By addressing the contract incompleteness of the risk allocation, an operational method is developed. This is a new approach to allocate risks for EPC projects in a dynamic and staged way.

Digital twin (DT) is an emerging technology that enables sophisticated interaction between physical objects and their virtual replicas. Although DT has recently gained significant attraction in both industry and academia, there is no systematic understanding of DT from its development history to its different concepts and applications in disparate disciplines. The majority of DT literature focuses on the conceptual development of DT frameworks for a specific implementation area. Hence, this paper provides a state-of-the-art review of DT history, different definitions and models, and six types of key enabling technologies. The review also provides a comprehensive survey of DT applications from two perspectives: (1) applications in four product-lifecycle phases, i.e. product design, manufacturing, operation and maintenance, and recycling and (2) applications in four categorized engineering fields, including aerospace engineering, tunneling and underground engineering, wind engineering and Internet of things (IoT) applications. DT frameworks, characteristic components, key technologies and specific applications are extracted for each DT category in this paper. A comprehensive survey of the DT references reveals the following findings: (1) The majority of existing DT models only involve one-way data transfer from physical entities to virtual models and (2) There is a lack of consideration of the environmental coupling, which results in the inaccurate representation of the virtual components in existing DT models. Thus, this paper highlights the role of environmental factor in DT enabling technologies and in categorized engineering applications. In addition, the review discusses the key challenges and provides future work for constructing DTs of complex engineering systems.

This work aims at proposing a novel Internet of Things (IoT)-based and cloud-assisted monitoring architecture for smart manufacturing systems able to evaluate their overall status and detect eventual anomalies occurring into the production. A novel artificial intelligence (AI) based technique, able to identify the specific anomalous event and the related risk classification for possible intervention, is hence proposed.

The proposed solution is a five-layer scalable and modular platform in Industry 5.0 perspective, where the crucial layer is the Cloud Cyber one. This embeds a novel anomaly detection solution, designed by leveraging control charts, autoencoders (AE) long short-term memory (LSTM) and Fuzzy Inference System (FIS). The proper combination of these methods allows, not only detecting the products defects, but also recognizing their causalities.

The proposed architecture, experimentally validated on a manufacturing system involved into the production of a solar thermal high-vacuum flat panel, provides to human operators information about anomalous events, where they occur, and crucial information about their risk levels.

Thanks to the abnormal risk panel; human operators and business managers are able, not only of remotely visualizing the real-time status of each production parameter, but also to properly face with the eventual anomalous events, only when necessary. This is especially relevant in an emergency situation, such as the COVID-19 pandemic.

The monitoring platform is one of the first attempts in leading modern manufacturing systems toward the Industry 5.0 concept. Indeed, it combines human strengths, IoT technology on machines, cloud-based solutions with AI and zero detect manufacturing strategies in a unified framework so to detect causalities in complex dynamic systems by enabling the possibility of products’ waste avoidance.

At present numerical simulation of seismicity, used in mining and hydraulic fracturing practice, is quite time expensive what hampers its combined employing with observed seismicity in real time. The purpose of this paper is to suggest a mean for drastic speeding up numerical modeling seismic and aseismic events.

The authors propose the means to radically decrease the time expense for the bottleneck stage of simulation: calculations of stresses, induced by a large group of already activated flaws (sources of events), at locations of flaws of another large group, which may be activated by the stresses. This is achieved by building a hierarchical tree and properly accounting for the sizes of activated flaws, excluding check of their influence on flaws, which are beyond strictly defined near-regions of strong interaction.

Comparative simulations of seismicity by conventional and improved methods demonstrate high efficiency of the means developed. When applied to practical mining and hydrofracturing problems, it requires some two orders less time to obtain practically the same output results as those of conventional methods.

The proposed improvement provides a means for simulation of seismicity in real time of mining steps and hydrofracture propagation. It can be also used in other applications involving seismic and aseismic events and acoustic emission.

This paper aims to examine the integration of lateral transshipment and road vulnerability into the humanitarian relief chain in light of affected area priority to address equitable distribution and assess the impact of various parameters on the total average inflated distance traveled per relief item.

After identifying comprehensive critical criteria and subcriteria, a hybrid multi-criteria decision-making framework was applied to obtain the demand points’ weight and ranking in a real-life earthquake scenario. Direct shipment and lateral transshipment models were then presented and compared. The developed mathematical models are formulated as mixed-integer programming models, considering facility location, inventory prepositioning, road vulnerability and quantity of lateral transshipment.

The study found that the use of prioritization criteria and subcriteria, in conjunction with lateral transshipment and road vulnerability, resulted in a more equitable distribution of relief items by reducing the total average inflated distance traveled per relief item.

To the best of the authors’ knowledge, this study is one of the first research on equity in humanitarian response through prioritization of demand points. It also bridges the gap between two areas that are typically treated separately: multi-criteria decision-making and humanitarian logistics.

This is the first scholarly work in Shiraz focused on the equitable distribution system by prioritization of demand points and assigning relief items to them after the occurrence of a medium-scale earthquake scenario considering lateral transshipment in the upper echelon.

The paper clarifies how to prioritize demand points to promote equity in humanitarian logistics when the authors have faced multiple factors (i.e. location of relief distribution centers, inventory level, distance, lateral transshipment and road vulnerability) simultaneously.

Multinational business deliver value via multiple sites with similar operational capacities. The age of the Fourth Industrial Revolution (4IR) delivers significant opportunities for the deployment of digital tools for business optimization. Therefore, this study aims to study the Industry 4.0 implementation for multinationals.

The key objective of this research is multi-site systems integration using a reproducible, modular and standardized “Cyber Physical System (CPS) as-a-Service”.

A best practice reference architecture is adopted to guide the design and delivery of a pioneering CPS multi-site deployment. The CPS deployed is a cloud-based platform adopted to enable all manufacturing areas within a multinational energy and petrochemical company. A methodology is developed to quantify the system environmental and sustainability benefits focusing on reduced carbon dioxide (CO₂) emissions and energy consumption. These results demonstrate the benefits of standardization, replication and digital enablement for multinational businesses.

The research illustrates the ability to design a single system, reproducible for multiple sites. This research also illustrates the beneficial impact of system reuse due to reduced environmental impact from lower CO₂ emissions and energy consumption. The paper assists organizations in deploying complex systems while addressing multinational systems implementation constraints and standardization.

The operation safety of the high-speed railway has been widely concerned. Due to the joint influence of the environment, equipment, personnel and other factors, accidents are inevitable in the operation process. However, few studies focused on identifying contributing factors affecting the severity of high-speed railway accidents because of the difficulty in obtaining field data. This study aims to investigate the impact factors affecting the severity of the general high-speed railway.

A total of 14 potential factors were examined from 475 data. The severity level is categorized into four levels by delay time and the number of subsequent trains that are affected by the accident. The partial proportional odds model was constructed to relax the constraint of the parallel line assumption.

The results show that 10 factors are found to significantly affect accident severity. Moreover, the factors including automation train protection (ATP) system fault, platform screen door and train door fault, traction converter fault and railway clearance intrusion by objects have an effect on reducing the severity level. On the contrary, the accidents caused by objects hanging on the catenary, pantograph fault, passenger misconducting or sudden illness, personnel intrusion of railway clearance, driving on heavy rain or snow and train collision against objects tend to be more severe.

The research results are very useful for mitigating the consequences of high-speed rail accidents.

The purpose of this study is to develop a method to assess social performance. Traditionally, environment, social and governance (ESG) rating providers use subjectively weighted arithmetic averages to combine a set of social performance (SP) indicators into one single rating. To overcome this problem, this study investigates the preconditions for a new methodology for rating the SP component of the ESG by applying machine learning (ML) and artificial intelligence (AI) anchored to social controversies.

This study proposes the use of a data-driven rating methodology that derives the relative importance of SP features from their contribution to the prediction of social controversies. The authors use the proposed methodology to solve the weighting problem with overall ESG ratings and further investigate whether prediction is possible.

The authors find that ML models are able to predict controversies with high predictive performance and validity. The findings indicate that the weighting problem with the ESG ratings can be addressed with a data-driven approach. The decisive prerequisite, however, for the proposed rating methodology is that social controversies are predicted by a broad set of SP indicators. The results also suggest that predictively valid ratings can be developed with this ML-based AI method.

This study offers practical solutions to ESG rating problems that have implications for investors, ESG raters and socially responsible investments.

The proposed ML-based AI method can help to achieve better ESG ratings, which will in turn help to improve SP, which has implications for organizations and societies through sustainable development.

To the best of the authors’ knowledge, this research is one of the first studies that offers a unique method to address the ESG rating problem and improve sustainability by focusing on SP indicators.