Search results

In a dual-robot system, the relative position error is a superposition of errors from each mono-robot, resulting in deteriorated coordination accuracy. This study aims to enhance relative accuracy of the dual-robot system through direct compensation of relative errors. To achieve this, a novel calibration-driven transfer learning method is proposed for relative error prediction in dual-robot systems.

A novel local product of exponential (POE) model with minimal parameters is proposed for error modeling. And a two-step method is presented to identify both geometric and nongeometric parameters for the mono-robots. Using the identified parameters, two calibrated models are established and combined as one dual-robot model, generating error data between the nominal and calibrated models’ outputs. Subsequently, the calibration-driven transfer, involving pretraining a neural network with sufficient generated error data and fine-tuning with a small measured data set, is introduced, enabling knowledge transfer and thereby obtaining a high-precision relative error predictor.

Experimental validation is conducted, and the results demonstrate that the proposed method has reduced the maximum and average relative errors by 45.1% and 30.6% compared with the calibrated model, yielding the values of 0.594 mm and 0.255 mm, respectively.

First, the proposed calibration-driven transfer method innovatively adopts the calibrated model as a data generator to address the issue of real data scarcity. It achieves high-accuracy relative error prediction with only a small measured data set, significantly enhancing error compensation efficiency. Second, the proposed local POE model achieves model minimality without the need for complex redundant parameter partitioning operations, ensuring stability and robustness in parameter identification.

This study aims to propose an efficient dual-robot task collaboration strategy to address the issue of low work efficiency and inability to meet the production needs of a single robot during construction operations.

A hybrid task allocation method based on integer programming and auction algorithms, with the aim of achieving a balanced workload between two robots has been proposed. In addition, while ensuring reasonable workload allocation between the two robots, an improved dual ant colony algorithm was used to solve the dual traveling salesman problem, and the global path planning of the two robots was determined, resulting in an efficient and collision-free path for the dual robots to operate. Meanwhile, an improved fast Random tree rapidly-exploring random tree algorithm is introduced as a local obstacle avoidance strategy.

The proposed method combines randomization and iteration techniques to achieve an efficient task allocation strategy for two robots, ensuring the relative optimal global path of the two robots in cooperation and solving complex local obstacle avoidance problems.

This method is applied to the scene of steel bar tying in construction work, with the workload allocation and collaborative work between two robots as evaluation indicators. The experimental results show that this method can efficiently complete the steel bar banding operation, effectively reduce the interference between the two robots and minimize the interference of obstacles in the environment.

The purpose of this paper is to illustrate the growing role of robots in environmental monitoring.

Following an introduction, this first considers aerial robots for monitoring atmospheric pollution. It then discusses the role of aerial, surface and underwater robots to monitor aquatic environments. Some examples are then provided of the robotic monitoring of the terrestrial environment, and finally, brief conclusions are drawn.

Robots are playing an important role in numerous environmental monitoring applications and have overcome many of the limitations of traditional methodologies. They operate in all media and frequently provide data with enhanced spatial and temporal coverage. In addition to detecting pollution and characterising environmental conditions, they can assist in locating illicit activities. Drones have benefited from the availability of small and lightweight imaging devices and sensors that can detect airborne pollutants and also characterise certain features of aquatic and terrestrial environments. As with other robotic applications, environmental drone imagery is benefiting from the use of AI techniques. Ranging from short-term local deployments to extended-duration oceanic missions, aquatic robots are increasingly being used to monitor and characterise freshwater and marine environments.

This provides a detailed insight into the growing number of ways that robots are being used to monitor the environment.

The study proposed a human–robot interaction (HRI) framework to enable operators to communicate remotely with robots in a simple and intuitive way. The study focused on the situation when operators with no programming skills have to accomplish teleoperated tasks dealing with randomly localized different-sized objects in an unstructured environment. The purpose of this study is to reduce stress on operators, increase accuracy and reduce the time of task accomplishment. The special application of the proposed system is in the radioactive isotope production factories. The following approach combined the reactivity of the operator’s direct control with the powerful tools of vision-based object classification and localization.

Perceptive real-time gesture control predicated on a Kinect sensor is formulated by information fusion between human intuitiveness and an augmented reality-based vision algorithm. Objects are localized using a developed feature-based vision algorithm, where the homography is estimated and Perspective-n-Point problem is solved. The 3D object position and orientation are stored in the robot end-effector memory for the last mission adjusting and waiting for a gesture control signal to autonomously pick/place an object. Object classification process is done using a one-shot Siamese neural network (NN) to train a proposed deep NN; other well-known models are also used in a comparison. The system was contextualized in one of the nuclear industry applications: radioactive isotope production and its validation were performed through a user study where 10 participants of different backgrounds are involved.

The system was contextualized in one of the nuclear industry applications: radioactive isotope production and its validation were performed through a user study where 10 participants of different backgrounds are involved. The results revealed the effectiveness of the proposed teleoperation system and demonstrate its potential for use by robotics non-experienced users to effectively accomplish remote robot tasks.

The proposed system reduces risk and increases level of safety when applied in hazardous environment such as the nuclear one.

The contribution and uniqueness of the presented study are represented in the development of a well-integrated HRI system that can tackle the four aforementioned circumstances in an effective and user-friendly way. High operator–robot reactivity is kept by using the direct control method, while a lot of cognitive stress is removed using elective/flapped autonomous mode to manipulate randomly localized different configuration objects. This necessitates building an effective deep learning algorithm (in comparison to well-known methods) to recognize objects in different conditions: illumination levels, shadows and different postures.

The purpose of this paper is to propose a method for selecting the position and attitude trajectory of error measurement to improve the kinematic calibration efficiency of a one translational and two rotational (1T2R) parallel power head and to improve the error compensation effect by improving the properties of the error identification matrix.

First, a general mapping model between the endpoint synthesis error is established and each geometric error source. Second, a model for optimizing the position and attitude trajectory of error measurement based on sensitivity analysis results is proposed, providing a basis for optimizing the error measurement trajectory of the mechanism in the working space. Finally, distance error measurement information and principal component analysis (PCA) ideas are used to construct an error identification matrix. The robustness and compensation effect of the identification algorithm were verified by simulation and through experiments.

Through sensitivity analysis, it is found that the distribution of the sensitivity coefficient of each error source in the plane of the workspace can approximately represent its distribution in the workspace, and when the end of the mechanism moves in a circle with a large nutation angle, the comprehensive influence coefficient of each sensitivity is the largest. Residual analysis shows that the robustness of the identification algorithm with the idea of PCA is improved. Through experiments, it is found that the compensation effect is improved.

A model for optimizing the position and attitude trajectory of error measurement is proposed, which can effectively improve the error measurement efficiency of the 1T2R parallel mechanism. In addition, the PCA idea is introduced. A least-squares PCA error identification algorithm that improves the robustness of the identification algorithm by improving the property of the identification matrix is proposed, and the compensation effect is improved. This method has been verified by experiments on 1T2R parallel mechanism and can be extended to other similar parallel mechanisms.