Search results

The purpose of this study is to simulate the tensile and shear types of fractures using the mixed fracture criteria considering the energy evolution based on the dual bilinear cohesive zone model and investigate the dynamic propagation of tensile and shear fractures induced by an impact load in rock. The propagation of tension and shear at different scales induced by the impact load is also an important aspect of this study.

In this study, based on the well-developed dual bilinear cohesive zone model and combined finite element-discrete element method, the dynamic propagation of tensile and shear fractures induced by the impact load in rock is investigated. Some key technologies, such as the governing partial differential equations, fracture criteria, numerical discretisation and detection and separation, are introduced to form the global algorithm and procedure. By comparing with the tensile and shear fractures induced by the impact load in rock disc in typical experiments, the effectiveness and reliability of the proposed method are well verified.

The dynamic propagation of tensile and shear fractures in the laboratory- and engineering-scale rock disc and rock strata are derived. The influence of mesh sensitivity, impact load velocities and load positions are investigated. The larger load velocities may induce larger fracture width and entire failure. When the impact load is applied near the left support constraint boundary, concentrated shear fractures appear around the loading region, as well as induced shear fracture band, which may induce local instability. The proposed method shows good applicability in studying the propagation of tensile and shear fractures under impact loads.

The proposed method can identify fracture propagation via the stress and energy evolution of rock masses under the impact load, which has potential to be extended into the investigation of the mixed fractures and disturbance of in-situ stresses during dynamic strata mining in deep energy development.

With the development of fracturing technology, the research of multi-well hydrofracturing becomes the key issue. Frac-hits in multi-well hydrofracturing has an important effect on fracture propagation and final production of fractured well; in the process of hydrofracturing, there are many implement parameters that can affect frac-hits, and previous studies in this area have not systematically targeted the influence of a single parameter on multi-well hydrofracturing. Therefore, it is of great significance to study the occurrence rule and influence of frac-hits for optimizing the design of fracturing wells.

Based on the proposed numerical models, the effects of different fracturing implement parameters (perforation cluster spacing, well spacing and injection rate) on frac-hits are compared in numerical cases. Through the analysis of fracture network, stress field and microseismic, the effects of different fracturing implement parameters on frac-hits and connections are compared.

The simulation results show that the effect of perforation cluster spacing and well spacing on frac-hits is greater than that of injection rate. Smaller well spacing makes it easier for fractures between adjacent wells to interact with each other, which increases the risk of frac-hits and reduces the risk of fracture connections. Smaller perforation cluster spacing results in larger individual fracture lengths and greater deflection angles, which makes the possibility of frac-hits and connections greater. The lower the injection rate, the lower the probability of frac-hits.

In this study, the influence of different fracturing implement parameters on frac-hits and connections in multi-well hydrofracturing is studied, and the mechanism of frac-hits and connections is analyzed through fracture network, stress field and microseismic analysis. Different simulation results are compared to optimize fracturing well parameter design and provide reference for engineering application.

This study aims to extend the known design guidelines for the polymer-based fused filament fabrication (FFF) 3D printing process with the focus on function-integrated components, specifically optomechanical parts. The potential of this approach is demonstrated by manufacturing function-integrated optomechanics for a low-power solid-state laser system.

For the production of function-integrated additively manufactured optomechanics using the FFF process, essential components and subsystems have been identified for which no design guidelines are available. This includes guidelines for integrating elements, particularly optics, into a polymer structure as well as guidelines for printing functional threads and ball joints. Based on these results, combined with prior research, a function-integrated low-power solid-state laser optomechanic was fabricated via the FFF process, using a commercial 3D printer of the type Ultimaker 3. The laser system's performance was assessed and compared to a reference system that employed commercial optomechanics, additionally confirming the design guidelines derived from the study.

Based on the design goal of function integration, the existing design guidelines for the FFF process are systematically extended. This success is demonstrated by the fabrication of an integrated optomechanic for a solid-state laser system.

Based on these results, scientists and engineers will be able to use the FFF process more extensively and benefit from the possibilities of function-integrated manufacturing.

Extensive research has been published on additive manufacturing of optomechanics. However, this research often emphasizes only cost reduction and short-term availability of components by reprinting existing parts. This paper aims to explore the capabilities of additive manufacturing in the production of function-integrated components to reduce the number of individual parts required, thereby decreasing the workload for system assembly and leading to an innovative production process for optical systems. Consequently, where needed, it provides new design guidelines or extends existing ones and verifies them by means of test series.

This paper develops a neural network surrogate model based on a discrete lattice approach to investigate the influence of complex microstructures on the emergent behavior of biological networks.

The adaptability of network-forming organisms, such as, slime molds, relies on fluid-to-solid state transitions and dynamic behaviors at the level of the discrete microstructure, which continuum modeling methods struggle to capture effectively. To address this challenge, we present an optimized approach that combines lattice spring modeling with machine learning to capture dynamic behavior and develop nonlinear constitutive relationships.

This integrated approach allows us to predict the dynamic response of biological materials with heterogeneous microstructures, overcoming the limitations of conventional trial-and-error lattice design. The study investigates the microstructural behavior of biological materials using a neural network-based surrogate model. The results indicate that our surrogate model is effective in capturing the behavior of discrete lattice microstructures in biological materials.

The combination of numerical simulations and machine learning endows simulations of the slime mold Physarum polycephalum with a more accurate description of its emergent behavior and offers a pathway for the development of more effective lattice structures across a wide range of applications.

The novelty of this research lies in integrating lattice spring modeling and machine learning to explore the dynamic behavior of biological materials. This combined approach surpasses conventional methods, providing a more holistic and accurate representation of emergent behaviors in organisms.

The purpose of this paper reporting an exploratory pilot study is to examine how participant engagement in design thinking varies when playing and fixing (playfixing) three partially complete games (broken games).

The data for this study consist of transcripts of five playfixing sessions with a total of 16 participants. Each session focused on one of three games. The authors used Winn’s (2009) design-play-experience framework to analyze features of each game that might relate to differences in design thinking. Next, the authors coded each playfixing session’s transcript to identify patterns of design thinking. Finally, these findings were used to make conjectures about how design features and flaws might encourage particular forms of design thinking.

The findings indicate how playfixing tabletop games with varied levels of complexity, playability and rule definition lead to different patterns of design thinking.

This is a first step toward understanding how the constraints associated with various elements of broken games might direct participants toward desired modes of design thinking and more broadly, contributes to the literature on the educational uses of game making.

This study aims to propose and numerically assess different ways of discretising a very weak formulation of the Poisson problem.

We use integration by parts twice to shift smoothness requirements to the test functions, thereby allowing low-regularity data and solutions.

Various conforming discretisations are presented and tested, with numerical results indicating good accuracy and stability in different types of problems.

This is one of the first articles to propose and test concrete discretisations for very weak variational formulations in primal form. The numerical results, which include a problem based on real MRI data, indicate the potential of very weak finite element methods for tackling problems with low regularity.

The purpose of this study is to develop a new numerical algorithm to simulate the phase-field model.

First, the derivative of the temporal direction is discretized by a second-order linearized finite difference scheme where it conserves the energy stability of the mathematical model. Then, the isogeometric collocation (IGC) method is used to approximate the derivative of spacial direction. The IGC procedure can be applied on irregular physical domains. The IGC method is constructed based upon the nonuniform rational B-splines (NURBS). Each curve and surface can be approximated by the NURBS. Also, a map will be defined to project the physical domain to a simple computational domain. In this procedure, the partial derivatives will be transformed to the new domain by the Jacobian and Hessian matrices. According to the mentioned procedure, the first- and second-order differential matrices are built. Furthermore, the pseudo-spectral algorithm is used to derive the first- and second-order nodal differential matrices. In the end, the Greville Abscissae points are used to the collocation method.

In the numerical experiments, the efficiency and accuracy of the proposed method are assessed through two examples, demonstrating its performance on both rectangular and nonrectangular domains.

This research work introduces the IGC method as a simulation technique for the phase-field crystal model.

Multilayer composite liner structures are the primary structural form of hydraulic tunnels. However, the bearing mechanism of multilayer composite liners has not been investigated thoroughly. Many existing design schemes do not properly achieve a balance between structural safety, anti-seepage capacity, and cost effectiveness. Thus, a new composite liner structure type and its theoretical model was proposed.

A novel hydraulic tunnel composite liner structure with a polyurea spray coating interlayer was proposed in this study. A theoretical model based on the state-space method was developed and verified using FEM models and existing theoretical models. Parametric analysis was conducted based on the theoretical model to investigate the influence of various variables, including interfacial shear stiffness, inner liner thickness, and outer liner elastic modulus.

It was concluded that the proposed theoretical model can be used successfully to calculate multilayer composite liner structures with high calculation efficiency. The overall deformation stiffness of the composite liner system increased with the interfacial shear stiffness. The sprayed coating interlayer significantly affects the residual force distribution between the outer and inner liners, which can also be affected by the adjustment of the thickness of the outer and inner liners. Thus, attention should be paid to these factors in the rational design of the proposed composite liner system.

With the development of China’s water conservancy projects, complex geological conditions, high surrounding rock stress, high internal and external water pressures, and other unique application scenarios have gradually increased. This places higher requirements on the bearing performance and impermeability of hydraulic tunnel lining structures. On the other hand, conventional hydraulic tunnel lining structures can hardly achieve a satisfactory balance between economy, structural safety, and impermeability. Thus, the proposed structure has the potential to be used in a wide range of applications.

Visual sustainability has gained significant relevance for both firms and consumers. While the importance of perceived sustainability in package design is well researched, there is a research gap regarding divergent responses of consumers to perceived visual sustainability. This research aims to close this gap by providing deeper insights into the underlying mechanisms of perceived visual sustainability in package design. As a boundary condition, this work also investigates gender differences in response to a design’s visual sustainability.

To explore the mediating influences of cognitive (i.e. a product’s gentleness and power) versus emotional (i.e. moral satisfaction) attributes as well as the role of consumer gender in the perceived visual sustainability–purchase intention relationship, the authors extend previous research through three experiments.

Study 1 provides initial evidence supporting the main effect of perceived visual sustainability on purchase intention. Findings of Study 2 show that moral satisfaction serves as a significant driver of purchase intention for females, while power-related attributes are more influential for males. Study 3 provides additional evidence for the main effect, the interaction effect with consumer gender and underlying mechanisms.

These findings have important implications for marketers and designers aiming to design packages that appeal to different consumer groups based on their (gender-specific) values regarding visual sustainability.

This work extends the literature on green behavior by highlighting the importance of perceived visual sustainability as a factor that influences purchase intention and the role of cognitive versus affective mechanisms in shaping consumer responses to design sustainability.

While research on privacy concerns is rich in understanding and depth, there is still not a clear understanding of why people express having privacy concerns, but do not behave consistently with their concern. We propose that this misalignment derives from a diverse set of privacy boundaries, depending on the user. This research builds on prior Communication Privacy Management Theory research to further define individual privacy boundaries. Beyond that, we evaluate the relationship between the privacy boundaries people set, and their ability to protect themselves.

A survey was conducted to assess how private individuals find twenty items. Along with measuring the sensitivity of information, we collected responses on the Online Privacy Information Literacy test to measure differences in sensitivity based on privacy knowledge. 285 participant’s responses were evaluated using exploratory factor analysis and K-means clustering.

We identify five different groups of privacy indicators. Our findings also suggest that users have limited understanding of how to keep data private, even if they have high privacy concerns.

We contribute to theory by offering guidance on how to better apply theoretical understanding, based on our results. More explicitly, we offer analysis that suggests boundary conditions might be absent from current theoretical understanding. Practically, we offer guidance for understanding privacy differences, which is important to understanding how to implement privacy protection laws.