Search results

Thermal power plants have many problems regarding noise and vibration. Previous studies have shown that such problems are often related to the fans. However, the internal flows are difficult to analyze to find the cause of vibration and noise in fans in actual tests. Therefore, the unsteady internal flow field in a centrifugal fan was simulated numerical to identify the source. This paper aims to present these issues.

The unsteady Reynolds‐averaged Navier‐Stokes equations with the SST k‐ω turbulence model were solved to simulate the flow within the entire flow path of the fan. The conservation of mass and moment and energy equations were used to solve the flow field distribution. The time‐dependent pressure pulsations on the impeller were analyzed for the dynamics problem. The finite volume method with the SIMPLEC algorithm was used to discretize the time‐dependent equations. The second‐order upwind scheme was used for the convection terms and the central difference scheme was chosen for the diffusion terms in the momentum and transport equations.

The numerical simulations illustrated the flow characteristics inside the double suction centrifugal fan. The predicted efficiency is almost the same as the experimental value. The estimated pressure and temperature fields are quite reasonable. The results showed that the interaction between the non‐uniform impeller flow and the fixed volute aroused the significant pressure fluctuations, which is an important source of vibration and noise in centrifugal machinery.

It is assumed that there is no change in the density in the whole flow passage, and the predicted outlet temperature is about 1.15 per cent lower than the experimental result.

The simulation study indicates that the prediction of noise is possible by using pressure pulsation. It is recommended to control the pressure pulsation in the fans, to decrease the vibration and noise of thermal power plants.

“It should also be noted that the objective of convergence and equal distribution, including across under-performing areas, can hinder efforts to generate growth. Contrariwise, the objective of competitiveness can exacerbate regional and social inequalities, by targeting efforts on zones of excellence where projects achieve greater returns (dynamic major cities, higher levels of general education, the most advanced projects, infrastructures with the heaviest traffic, and so on). If cohesion policy and the Lisbon Strategy come into conflict, it must be borne in mind that the former, for the moment, is founded on a rather more solid legal foundation than the latter” European Commission (2005, p. 9)Adaptation of Cohesion Policy to the Enlarged Europe and the Lisbon and Gothenburg Objectives.

Aim of the present monograph is the economic analysis of the role of MNEs regarding globalisation and digital economy and in parallel there is a reference and examination of some legal aspects concerning MNEs, cyberspace and e‐commerce as the means of expression of the digital economy. The whole effort of the author is focused on the examination of various aspects of MNEs and their impact upon globalisation and vice versa and how and if we are moving towards a global digital economy.

A computational procedure based on a hybrid Lagrangian‐Eulerian discrete‐vortical element formulation and conformal transformation schemes are employed in this study to simulate the interaction of an air jet with swirling air flow inside a two‐dimensional cylinder. Such an investigation is of importance to many flow‐related industrial and environmental problems, such as mixing, cooling, combustion and dispersion of air‐borne or water‐borne contaminants because of the role of vortices in the global transport of matter and heat. The basis for the simulation is discussed and numerical results compared with theoretical results for the velocity field and streamfunction obtained by the method of images. The swirling air motion and the features of a real jet are well simulated and numerical results are validated by predictions of theory to within 20 per cent. To illustrate the merging and interaction processes of vortices and the formation of large eddies, velocity vectors, particle trajectories and streamline contours are presented.

This study aims to present the analysis of methods for cavitaion surge obstruction in water pump systems with particular focus on the two different inlet geometry configurations.

A cavitating flow field was simulated by RANS based computational fluid dynamics (CFD) program for different pump configurations operating in the unstable cavitation regime, inducing surging process. Numerical simulation results were compared to visualization and measurements results.

Presented results show that a hydro dynamically induced surging regime could be limited and further advantages regarding operating characteristics of radial pumps could be achieved with presented geometry modifications.

This study provides insight into complicated transient cavitation flow patterns in conventional centrifugal pumps and introduces effective geometry optimization ideas useful to researchers and engineers in the area of fluid dynamics and hydromachinery.

The purpose of this paper is to bring in and clarify the performance of the Vreman and dynamic Vreman models (VM and DVM) in simulating the internal flow of the centrifugal pump impeller.

Four subgrid scale (SGS) models, including the Smagorinsky model, the dynamic Smagorinsky model, the VM and the DVM are chosen to study the performance in predicting the flow field in the centrifugal pump impeller at design load. The velocity and turbulent kinetic energy distributions are compared. Also, the temporal variation of the model coefficient of the DVM is studied.

The results of all the four models show agreement with both the PIV and LDV data. It is clarified that the VM and the DVM are adaptive in simulating the turbulent flow in the centrifugal pump at design load, and the DVM shows even better performance in predicting the velocity distribution. Additionally, the temporal variation of the model coefficient of the DVM is about 0.01, which is the optimal value for VM in this study. It is verified that VM can perform as good as the dynamic models when an appropriate model coefficient is chosen.

The applicability of the VM and the DVM in simulating the internal flow of the centrifugal pump has been proven at design load. The introducing of the two models into centrifugal pump’s simulation can provide some new ideas in constructing more adaptive SGS models for this kind of high-rotating flow.

The purpose of this paper is the development of a new turbocharger compressor is a challenging task particularly when both wider operating range and higher efficiency are required. However, the cumbersome design effort and the inherent calculus burden can be significantly reduced by using appropriate design optimization approaches as an alternative to conventional design techniques.

This paper presents an optimization-based preliminary-design (OPD) approach based on a judicious coupling between evolutionary optimization techniques and a modified one-dimensional mean-line model. Two optimization strategies are considered. The first one is mono-objective and is solved using genetic algorithms. The second one is multi-objective and it is handled using the non-dominated sorting genetic algorithm-II. The proposed approach constitutes an automatic search process to select the geometrical parameters of the compressor, ensuring the most common requirements of the preliminary-design phase, with a minimum involvement of the designer.

The obtained numerical results demonstrate that the proposed tool can rapidly produce nearly optimal designs as an excellent basis for further refinement in the phase by using more complex analysis methods such as computational fluid dynamics and meta-modeling.

This paper outlines a new fast OBPD approach for centrifugal compressor turbochargers. The proposal adopts an inverse design method and consists of two main phases: a formulation phase and a solution phase. The complexity of the formulated problem is reduced by using a sensitivity analysis. The solution phase requires to link, in an automatic way, three processes, namely, optimization, design and analysis.

Radial vibration of horizontal centrifugal pump has a close association with radial exciting forces. The purpose of this paper is to analyze the unsteady radial force in multistage centrifugal pump with double volute in detail and investigate the relevance of static pressure, radial force and radial vibration.

The unsteady numerical simulation with realizable k-ε turbulence model was carried out for a multistage centrifugal pump with double volute using computational fluid dynamics codes Fluent. The performance tests were conducted by use of a closed loop system and performance curves from numerical simulation agree with that of experiment. Vibration tests were carried out by vibration probes instrumented on the bearing cover of pump near no-driven end. Fast Fourier transform was used to obtain the frequency components of radial forces on the impellers from numerical simulation, which are compared with ones of radial vibration from experiment in Y and Z direction. And the static pressure distributions in the impeller were analyzed under different flow rates.

The symmetrical double volute can effectively balance radial forces. The maximum radial force and vibration velocity appear at 0.6 Q among the three flow rates 0.6 Q, Q and 1.2 Q. The frequencies corresponding to relatively large amplitude of vibration velocities and radial forces on the impellers in Y direction are blade passing frequency of the impellers. Blade passing frequency of first-stage impeller and shaft frequency are predominating in Z direction. It indicates that the radial vibration of centrifugal pump is closely related to the unsteady radial force.

The unsteady radial forces of the impeller in multistage centrifugal pump with double volute were comprehensively analyzed. The radial forces should be considered to balance during the design of multistage centrifugal pump.

The purpose of this study is to analyze an unsteady MHD Darcy flow of nonNewtonian hybrid nanoliquid past an exponentially accelerated vertical plate under the influence of velocity slip, Hall and ion slip effects in a rotating frame of reference. The fluids in the flow domain are assumed to be viscously incompressible electrically conducting. Sodium alginate (SA) has been taken as a base Casson liquid. A strong uniform magnetic field is applied under the assumption of low magnetic Reynolds number. Effect of Hall and ion-slip currents on the flow field is examined. The ramped heating and time-varying concentration at the plate are taken into consideration. First-order homogeneous chemical reaction and heat absorption are also considered. Copper and alumina nanoparticles are dispersed in base fluid sodium alginate to be formed as hybrid nanoliquid.

The model problem is first formulated in terms of partial differential equations (PDEs) with physical conditions. Laplace transform method (LTM) is used on the nondimensional governing equations for their closed-form solution. Based on these results, expressions for nondimensional shear stresses, rate of heat and mass transfer are also determined. Graphical presentations are chalked out to inspect the impacts of physical parameters on the pertinent physical flow characteristics. Numerical values of the shear stresses, rate of heat and mass transfer at the plate are tabulated for various physical parameters.

Numerical exploration reveals that a significant increase in the secondary flow (i.e. crossflow) near the plate is guaranteed with an augmenting in Hall parameter or ion slip parameter. MHD and porosity have an opposite effect on velocity component profiles for both types of nanoliquids. Result addresses that both shear stresses are strongly enhanced by the Casson effect. Also, hybrid nanosuspension in Casson fluid (sodium alginate) exhibits a lower rate of heat transfer than usual nanoliquid.

This model may be pertinent in cooling processes of metallic infinite plate in bath and hybrid magnetohydrodynamic (MHD) generators, metallurgical process, manufacturing dynamics of nanopolymers, magnetic field control of material processing, synthesis of smart polymers, making of paper and polyethylene, casting of metals, etc.

The originality of this study is to obtain an analytical solution of the modeled problem by using the Laplace transform method (LTM). Such an exact solution of nonNewtonian fluid flow, heat and mass transfer is rare in the literature. It is also worth remarking that the influence of Hall and ion slip effects on the flow of nonNewtonian hybrid nanoliquid is still an open question.