Search results

The purpose of this paper is to compare twin engine civil turboprop aircraft with their jet engine counterparts; to simplify the preliminary design process and the initial evaluation of twin civil turboprop aircraft; to include noise level consideration in the preliminary design; and to form a current database of design parameters for representative civil turboprop aircraft.

The paper finds linear correlations between key design parameters. It compares the corresponding correlations for turboprop and jet engine aircraft.

The paper finds direct linear relationships between design parameters including noise levels; simplified preliminary design process; and differences in the sensitivity of design parameters between turboprop and jet aircraft.

The turboprop aircraft database needs to be expanded. Also, investigation of non‐linear relations between design parameters is a next step.

Quick assessment and comparisons of existing designs is an outcome. Also, the preliminary design process is simplified and expedited. Lastly, noise regulations can affect the design right from the beginning and not at a later stage.

New correlations which simplify the current procedures for preliminary design of twin civil turboprop aircraft. In addition, the noise is included right from the beginning of the design. Direct comparison between turboprop and jet aircraft afforded via their correlated preliminary design parameters. Finally, a database of twin turboprops is formed with specially selected aircraft that are current and cover a wide spectrum of sizes.

This paper aims to set up and assess a new method to collaboratively mature the requirements for engine development in a more efficient way during the preliminary design phase.

A collaborative process has been set up in which detailed information on the behaviour of designed engines has been integrated into the aircraft preliminary sizing process by means of surrogate modelling.

The engine surrogate model has been invoked as a black box from within the aircraft preliminary design optimisation loops. The surrogate model reduces the uncertainty of coarse-grain formulas and may result in more competitive aircraft and engine designs. The surrogate model has been integrated in a collaborative cross-organisational workflow between aircraft manufacturer, engine manufacturer and simulation service providers to prepare for its deployment in industrial preliminary design processes.

The new collaborative way of working between aircraft manufacturer, engine manufacturer and simulation service providers could contribute to remove time consuming rework cycles in early and later design stages within delivering the optimal aircraft-engine combination.

The assessed process, based on an innovative collaboration standard, provides the opportunity to introduce useful design iterations with much more enriched information than in the classical design process as performed today. Specifically, the application of an engine surrogate model is advantageous, as it allows for extensive trade-off studies on aircraft level because of the low computational effort, while the intellectual property of the engine manufacturer (the engine preliminary design process) is respected and kept in-house.

The purpose of this paper is to present the results of the preliminary design and optimization of the air-intake system and the engine nacelle. The work was conducted as part of an integration process of a turboprop engine in a small aircraft in a tractor configuration.

The preliminary design process was performed using a parametric, interactive design approach. The parametric model of the aircraft was developed using the PARADES™ in-house software. The model assumed a high level of freedom concerning shaping all the components of aircraft important from the point of view of the engine integration. Additionally, the software was used to control the fulfillment of design constraints and to analyze selected geometrical properties. Based on the developed parametric model, the preliminary design was conducted using the interactive design and optimization methodology. Several concepts of the engine integration were investigated in the process. All components of the aircraft propulsion system were designed simultaneously to ensure their compliance with each other.

The concepts of the engine integration were modified according to changes in the design and technological constraints in the preliminary design process. For the most promising configurations, computational fluid dynamics (CFD) computations were conducted using commercial Reynolds-averaged Navier–Stokes solver FLUENT™ (ANSYS). The simulations tested the flow around the nacelle and inside the air-delivery system which consists of the air-intake duct, the foreign-particles separator and the auxiliary ducts delivering air to the cooling and air-conditioning systems. The effect of the working propeller was modeled using the Virtual Blade Model implemented in the FLUENT code. The flow inside the air-intake system was analyzed from the point of view of minimization of pressure losses in the air-intake duct, the quality of air stream delivered to the engine compressor and the effectiveness of the foreign particles separator.

Based on results of the CFD analyses, the final concept of the turboprop engine integration has been chosen.

The presented results of preliminary design process are valuable to achieve the final goal in the ongoing project.

The purpose of this paper is to simplify the preliminary design process as well as the initial evaluation of existing design parameters of civil jet aircraft; to include noise level consideration right from the start of the design process; and to form a current database of civil jet aircraft design parameters.

Simple (linear) correlations are found between key design parameters.

Direct linear relationships are found between design parameters including noise levels. Simplified preliminary design process.

New correlations which simplify the current procedures for preliminary design. In addition, the noise is included right from the beginning of the design. Finally, a new database is formed with specially selected aircraft that is current and covers a wide spectrum of sizes.

Integrating the aspects of sustainability into facilities design has become a designers’ challenge, and the early design phase is seen as the most important in implementing sustainability into facilities design. Therefore, this paper aims to analyze the factors that influence sustainability assessment of preliminary design of facilities and predicts sustainability assessment depending on those factors.

Data were collected by survey questionnaire distributed to project managers using a six-point Likert scale. Obtained data were modeled with general regression neural network (GRNN) using DTREG software. In total, 27 factors were chosen for determining the most accurate predictive model, and their importance was computed.

The six most important factors for sustainability assessment of facilities design are: work experience, work on several outline design proposals, resolving issues between stakeholders, prioritization of participants in the design phase, procurement management and defining projects’ program and goals. The predictive model that was used for prediction of the sustainability assessment was shown to be highly accurate, with MAPE (mean absolute percentage error) amounting to 2.58 per cent.

Using the same approach, assessment of every other factor for the preliminary design can be predicted and the factors that are most influential to its sustainability can be obtained.

The paper supports the sustainability improvement of the preliminary design of future facilities’ projects, as well as support during the decision-making process.

Discusses a solution to a growing need for Industry Knowledge Base in the construction industry. This paper shows a Case Based Reasoning model based on the Rough Sets Theory and applied as a decision support in the preliminary design phase of construction projects.

Dimensional variation management is a major challenge in multi‐station sheet metal assembly processes involving complex products such as automotive body and aircraft fuselage assemblies. Very few studies have explored it at a preliminary design phase taking into consideration effects of part deformation on variation propagation, since early design phase involves the development of imprecise design models with scant or incomplete product and process knowledge. The objective of this paper is to present a variation model which can be built into the preliminary design phase taking into consideration all of the existing interactions between flexible parts and tools in multi‐station sheet metal assembly process.

The paper addresses this problem by first, presenting a beam‐based product and process model which shares the same data structure of the B‐Rep CAD models, and therefore can be embedded in CAD systems for automatic product skeletal design; second, determining the influence of part deformation, for various, differing joining and releasing schemes, on variation propagation; and third, utilizing this information to generate a vector‐based variation propagation model for multistation sheet metal assemblies.

This paper presents a beam‐based product and process model which shares the same data structure of the B‐Rep CAD models, and therefore can be embedded in CAD systems for automatic product skeletal design; determines the influence of part deformation, for various, differing joining and releasing schemes, on variation propagation; and utilizes this information to generate a vector‐based variation propagation model for multistation sheet metal assemblies.

A truck cab assembly is presented to demonstrate the advantages of the proposed model over the state‐of‐the‐art approach used in industry for sheet metal assemblies.

The purpose of this paper is the development of a new turbocharger compressor is a challenging task particularly when both wider operating range and higher efficiency are required. However, the cumbersome design effort and the inherent calculus burden can be significantly reduced by using appropriate design optimization approaches as an alternative to conventional design techniques.

This paper presents an optimization-based preliminary-design (OPD) approach based on a judicious coupling between evolutionary optimization techniques and a modified one-dimensional mean-line model. Two optimization strategies are considered. The first one is mono-objective and is solved using genetic algorithms. The second one is multi-objective and it is handled using the non-dominated sorting genetic algorithm-II. The proposed approach constitutes an automatic search process to select the geometrical parameters of the compressor, ensuring the most common requirements of the preliminary-design phase, with a minimum involvement of the designer.

The obtained numerical results demonstrate that the proposed tool can rapidly produce nearly optimal designs as an excellent basis for further refinement in the phase by using more complex analysis methods such as computational fluid dynamics and meta-modeling.

This paper outlines a new fast OBPD approach for centrifugal compressor turbochargers. The proposal adopts an inverse design method and consists of two main phases: a formulation phase and a solution phase. The complexity of the formulated problem is reduced by using a sensitivity analysis. The solution phase requires to link, in an automatic way, three processes, namely, optimization, design and analysis.

A combustor design is a particularly important and difficult task in the development of gas turbine engines. During studies for accurate and easy combustor design, reasonable design methodologies have been established and used in engine development. The purpose of this paper is to review the design methodology for combustor in development of advanced gas turbine engines. The advanced combustor development task can be successfully achieved in less time and at lower cost by adopting new and superior design methodologies.

The review considers the main technical problems (combustion, cooling, fuel injection and ignition technology) in the development of modern combustor design and deals with combustor design methods by dividing it into preliminary design, performance evaluation, optimization and experiment. The advanced combustion and cooling technologies mainly used in combustor design are mentioned in detail. In accordance with the modern combustor design method, the design mechanisms are considered and the methods used in every stage of the design are reviewed technically.

The improved performances and strict emission limits of gas turbine engines require the application of advanced technologies when designing combustors. The optimized design mechanism and reasonable performance evaluation methods are very important in reducing experiments and increasing the effectiveness of the design.

This paper provides a comprehensive review of the design methodology for the advanced gas turbine engine combustor.

Major changes of an aircraft configuration are conducted during the early design stage. It is important to include the airworthiness regulations at this stage while there is extensive freedom for designing. The purpose of this paper is to introduce an efficient design framework that integrates airworthiness guidelines and documentation at the early design stage.

A new design and optimization process is proposed that logically includes the airworthiness regulations as design parameters and constraints by constructing a certification database. The design framework comprises requirements analysis, preliminary sizing, conceptual design synthesis and loads analysis. A design certification relation table (DCRT) describes the legal regulations in terms of parameters and values suitable for use in design optimization.

The developed framework has been validated and demonstrated for the design of a Federal Aviation Regulations (FAR) 23 four-seater small aircraft. The validation results show an acceptable level of accuracy to be applied during the early design stage. The total mass minimization problem has been successfully solved while satisfying all the design requirements and certification constraints specified in the DCRT. Moreover, successful compliance with FAR 23 subpart C is demonstrated. The proposed method is a useful tool for design optimization and compliance verifications during the early stages of aircraft development.

The new certification database proposed in this research makes it simpler for engineers to access a large amount of legal documentation related to airworthiness regulations and provides a link between the regulation text and actual design parameters and their bounds.

The proposed design optimization framework integrates the certification database that is built of several types of legal documents such as regulations, advisory circulars and standards. The Engineering Requirements and Guide summarizes all the documents and design requirements into a single document. The DCRT is created as a summary table that indicates the design parameters affected by a given regulation(s), the design stage at which the parameter can be evaluated and its value bounds. The introduction of the certification database into the design optimization framework significantly reduces the engineer’s load related for airworthiness regulations.