Search results

This paper aims to present the analytical investigation on an unsteady magneto-convective rotation of an electrically conducting non-Newtonian Casson hybrid nanoliquid past a vertical porous plate. The effects of thermal radiation, heat source/sink and hydrodynamic slip phenomenon are also taken into account. Ethylene glycol (EG) is adopted as a base Casson fluid. The Casson fluid model is accounted for to describe the rheological characteristics of non-Newtonian fluid. EG with copper and alumina nanoparticles is envisaged as a non-Newtonian Casson hybrid nanoliquid. The copper-alumina-ethylene glycol hybrid nanoliquid is considered as the regenerative coolant.

The perturbation method is implemented to develop the analytical solution of the modeled equations. Acquired solutions are used to calculate the shear stresses and the rate of heat transfer in terms of amplitudes and phase angles. Numerical results are figured out and tabled to inspect the physical insights of various emerging parameters on the pertinent flow characteristics.

This exploration discloses that the velocity profiles are strongly diminished by the slip parameter. Centrifugal and Coriolis forces caused by the plate rotation are found to significantly change the entire flow regime. The supplementation of nanoparticles is to lessen the amplitude of the heat transfer rate. A comparative study is carried out to understand the improvement of heat transfer characteristics of Casson hybrid nanoliquid and Casson nanoliquid. However, the Casson hybrid nanoliquid exhibits a lower rate of heat transfer than the usual Casson nanoliquid.

This proposed model would be pertinent in oceanography, meteorology, atmospheric science, power engineering, power and propulsion generation, solar energy transformation, thermoelectric and sensing material processing, tumbler in polymer manufacturing, etc. Motivated by such practical implications, the proposed study has been unfolded.

The novelty of this paper is to examine the simultaneous effects of the magnetic field, Coriolis force, suction/injection, slip condition and thermal radiation on non-Newtonian Casson hybrid nanoliquid flow past an oscillating vertical plate subject to periodically heating in a rotating frame of reference. A numerical comparison is also made with the existing published results under some limiting cases and it is found that the results are in good agreement with them. An in-depth review of the literature and the author’s best understanding find that such aspects of the problem have so far remained unexplored.

The purpose of this study is to analyze an unsteady MHD Darcy flow of nonNewtonian hybrid nanoliquid past an exponentially accelerated vertical plate under the influence of velocity slip, Hall and ion slip effects in a rotating frame of reference. The fluids in the flow domain are assumed to be viscously incompressible electrically conducting. Sodium alginate (SA) has been taken as a base Casson liquid. A strong uniform magnetic field is applied under the assumption of low magnetic Reynolds number. Effect of Hall and ion-slip currents on the flow field is examined. The ramped heating and time-varying concentration at the plate are taken into consideration. First-order homogeneous chemical reaction and heat absorption are also considered. Copper and alumina nanoparticles are dispersed in base fluid sodium alginate to be formed as hybrid nanoliquid.

The model problem is first formulated in terms of partial differential equations (PDEs) with physical conditions. Laplace transform method (LTM) is used on the nondimensional governing equations for their closed-form solution. Based on these results, expressions for nondimensional shear stresses, rate of heat and mass transfer are also determined. Graphical presentations are chalked out to inspect the impacts of physical parameters on the pertinent physical flow characteristics. Numerical values of the shear stresses, rate of heat and mass transfer at the plate are tabulated for various physical parameters.

Numerical exploration reveals that a significant increase in the secondary flow (i.e. crossflow) near the plate is guaranteed with an augmenting in Hall parameter or ion slip parameter. MHD and porosity have an opposite effect on velocity component profiles for both types of nanoliquids. Result addresses that both shear stresses are strongly enhanced by the Casson effect. Also, hybrid nanosuspension in Casson fluid (sodium alginate) exhibits a lower rate of heat transfer than usual nanoliquid.

This model may be pertinent in cooling processes of metallic infinite plate in bath and hybrid magnetohydrodynamic (MHD) generators, metallurgical process, manufacturing dynamics of nanopolymers, magnetic field control of material processing, synthesis of smart polymers, making of paper and polyethylene, casting of metals, etc.

The originality of this study is to obtain an analytical solution of the modeled problem by using the Laplace transform method (LTM). Such an exact solution of nonNewtonian fluid flow, heat and mass transfer is rare in the literature. It is also worth remarking that the influence of Hall and ion slip effects on the flow of nonNewtonian hybrid nanoliquid is still an open question.

The purpose of this study is to investigate the Cattaneo-Christov double diffusion, multiple slips and Darcy-Forchheimer’s effects on entropy optimized and thermally radiative flow, thermal and mass transport of hybrid nanoliquids past stretched cylinder subject to viscous dissipation and Arrhenius activation energy.

The presented flow problem consists of the flow, heat and mass transportation of hybrid nanofluids. This model is featured with Casson fluid model and Darcy-Forchheimer model. Heat and mass transportations are represented with Cattaneo-Christov double diffusion and viscous dissipation models. Multiple slip (velocity, thermal and solutal) mechanisms are adopted. Arrhenius activation energy is considered. For graphical and numerical data, the bvp4c scheme in MATLAB computational tool along with the shooting method is used.

Amplifying curvature parameter upgrades the fluid velocity while that of porosity parameter and velocity slip parameter whittles down it. Growing mixed convection parameter, curvature parameter, Forchheimer number, thermally stratified parameter intensifies fluid temperature. The rise in curvature parameter and porosity parameter enhances the solutal field distribution. Surface viscous drag gets controlled with the rising of the Casson parameter which justifies the consideration of the Casson model. Entropy generation number and Bejan number upgrades due to growth in diffusion parameter while that enfeeble with a hike in temperature difference parameter.

To the best of the authors’ knowledge, this research study is yet to be available in the existing literature.

This paper aims to study numerically the steady natural convective heat transfer of a hybrid nanosuspension (Ag-MgO/H2O) within a partially heated/cooled trapezoidal region with linear temperature profiles at inclined walls under an effect of uniform Lorentz force. This investigation is useful for researchers studying in the area of cavity flows to know features of the flow structures and nature of hybrid nanofluid characteristics. In addition, a detailed entropy generation analysis has been performed to highlight possible regimes with minimal entropy generation rates.

The governing equations formulated using the Oberbeck–Boussinesq approach and single-phase nanoliquid model are transformed to a non-dimensional form by using non-dimensional variables. The obtained equations with appropriate boundary conditions are resolved by the finite difference technique. The developed code has been validated comprehensively. Analysis has been performed for a wide range of governing parameters, including Rayleigh number (Ra = 105), Prandtl number (Pr = 6.82), Hartmann number (Ha = 0–100), magnetic field inclination angle (φ = 0–?/2) and nanoparticles volume fraction (φ_hnf = 0 and 2%).

It has been shown that inclined magnetic field can be used to manage the energy transport performance. An inclusion of nanoparticles without Lorentz force influence allows forming more stable convective regime with descending heat plume in the central zone, while such a regime was performed for clear fluid only for moderate and high Hartmann numbers. Moreover, the average overall entropy generation can be decreased with a growth of the Hartmann number, while an addition of hybrid nanoparticles allows reducing this parameter for Ha = 30 and 50. The average Nusselt number can be increased with a growth of the nanoparticles concentration for low values of the magnetic field intensity.

Governing equations written using the conservation laws and dimensionless non-primitive variables have been resolved by the finite difference approach. The created numerical code has been verified by applying the grid independence test and computational outcomes of other researchers. The comprehensive analysis for various key parameters has been performed.

Thermal features of hybrid nanoliquid consist of Cu–Ti, CuO–TiO₂ and C71500–Ti₆Al₄V/H₂O as hybrid mixtures of nano-sized particles in a base fluid through a microchannel are inspected. In this study, flow model of Darcy–Forchheimer is hired to examine the flow of hybrid composition.

The equations which delineate the physical occurrence of the flow are resolved via Runge–Kutta–Fehlberg scheme united through shooting procedure.

It is established that flow velocity of hybrid nano composition satisfies the identity U_(_{CuO-TiO2/water})>U_(_{Cu–Ti/water})>U_(_{C71500–Ti6Al4V/water}).

Hybrid nanofluid flow of Cu–Ti, CuO–TiO₂ and C71500–Ti₆Al₄V/H₂O hybrid mixtures in a base fluid through a microchannel are inspected.

This paper aims to consider the heat transportation together with irreversibility analysis for the flow of couple stress hybrid nanofluid past over a stretching surface. The innovative characteristics of this paper include electro-magnetohydrodynamic (EMHD) term, viscous dissipation, Joule heating and heat absorption\omission. The hybrid nanofluid is prepared due to the suspension of the solid nanoparticles of the single wall and multi-wall carbon nanotubes (SWCNTs and MWCNTs) in the blood for the testing purpose of heat transfer and drug deliveries. The experimental value of the Prandtl number used for the blood is 21 from the available literature and very large as compared to the Prandtl number of the other base fluids. Appropriate transformations are incorporated to convert the modeled partial differential equations into the nonlinear ordinary differential equations. The homotopy analysis method (HAM) is used to obtain the solution. The explanation for velocity, energy and entropy are exposed under the influence of various parameters such as E, M, k, Q, S and Ec. The numerical values are calculated and summarized for dimensionless Cf and Nu.

In this investigation, heat transportation together with irreversibility analysis for the flow of couple stress hybrid nanofluid past over a stretching surface is considered. The innovative characteristics of this paper include EMHD term, viscous dissipation, Joule heating and heat absorption\omission. The hybrid nanofluid is prepared due to the suspension of the solid nanoparticles of the SWCNTs and MWCNTs in the blood for the testing purpose of heat transfer and drug deliveries. The experimental value of the Prandtl number used for the blood is 21 from the available literature and very large as compared to the Prandtl number of the other base fluids. Appropriate transformations are incorporated to convert the modeled partial differential equations into the nonlinear ordinary differential equations. The HAM is used to obtain the solution. The explanation for velocity, energy and entropy are exposed under the influence of various parameters such as E, M, k, Q, S and Ec. The numerical values are calculated and summarized for dimensionless Cf and Nu.

The explanation for velocity, energy and entropy are exposed and the flow against various influential factors is discussed graphically. The numerical values are calculated and summarized for dimensionless In addition, the current study is compared for various values of to that published literature and an impressive agreement in terms of finding is reported. It has also been noticed that the and factors retards the hybrid nanofluid flow, while the temperature of fluid becomes upsurges by the rise in these factors.

This is examined while evaluating the previously discussed publications that study on EMHD aspects of magnetized Casson type hybrid nanofluid via entropy generation research is innovative but also acknowledging that the couple stress model challenged bilaterally on stretching surface has not yet been studied. So, there is an ongoing attempt to bridge such a space.

This study comprehensively examines entropy generation and thermosolutal performance of a ternary hybrid nanofluid in a partially active porous cabinet. The purpose of this study is to comprehend the intricate phenomena of double diffusion by investigating the dispersion behavior of Al₂O₃, CuO, and Ag nanoparticles in water.

The cabinet design consists of two horizontal walls and two curved walls with the lower border divided into a heated and concentrated region of length b and the remaining sections are adiabatic. The vertical borders are cold and low concentration, while the upper border is adiabatic. Two cavity configurations such as convex and concave are considered. A uniform porous medium is taken within the ternary hybrid nanofluid. This has been characterized by the Brinkman-extended Darcy model. Thermosolutal phenomena are governed by the Navier-Stokes equations and are solved by adopting a higher-order compact scheme.

The present study focuses on exploring the influence of several well-defined parameters, including Rayleigh number, Darcy number, Lewis number, Buoyancy ratio number, nanoparticle volume concentration and heater size. The results indicate that the ternary hybrid nanofluid outperforms both the mono and hybrid nanofluids in all considered aspects.

This study brings forth a significant contribution by uncovering novel flow features that have previously remained unexplored. By addressing a well-defined problem, the work provides valuable insights into the enhancement of thermal transport, with direct implications for diverse engineering devices such as solar collectors, heat exchangers and microelectronics.

The purpose of this paper is to address the impact of induced magnetic field in mixed convective stagnation flow of TiO₂-Cu-water hybrid nanofluid towards a stretchable sheet. Non-linear thermal radiation and heat source/sink are accounted. Flow of hybrid nanofluid is discussed. Non-linear partial differential expressions are converted to ordinary ones through appropriate transformations.

The obtained systems are solved for convergence solutions via homotopy analysis method. Graphical results are discussed for different physical variables on the velocity, induced magnetic field and temperature fields for both Cu water nanofluid and TiO₂-Cu-water hybrid nanofluid. Finally, the effect of different physical variables on skin friction coefficient (C_fx) and Nusselt number Nu_x in the presence of water nanofluid and TiO₂-Cu-water hybrid nanofluid are discussed.

Velocities and induced magnetic field are increasing functions of mixed convection parameter and nanoparticle volume fraction. Temperature rises for higher radiation parameter. Skin friction is greater in case of Cu-water nanoliquid, while Nusselt number is less for Cu-water nanofluid when they are compared with hybrid nanoliquid TiO₂-Cu-water.

No such work is not yet present in the literature.

A novel type of heat transfer fluid known as hybrid nanofluids is used to improve the efficiency of heat exchangers. It is observed from literature evidence that hybrid nanofluids outperform single nanofluids in terms of thermal performance. This study aims to address the stagnation point flow induced by Williamson hybrid nanofluids across a vertical plate. This fluid is drenched under the influence of mixed convection in a Darcy–Forchheimer porous medium with heat source/sink and entropy generation.

By applying the proper similarity transformation, the partial differential equations that represent the leading model of the flow problem are reduced to ordinary differential equations. For the boundary value problem of the fourth-order code (bvp4c), a built-in MATLAB finite difference code is used to tackle the flow problem and carry out the dual numerical solutions.

The shear stress decreases, but the rate of heat transfer increases because of their greater influence on the permeability parameter and Weissenberg number for both solutions. The ability of hybrid nanofluids to strengthen heat transfer with the incorporation of a porous medium is demonstrated in this study.

The findings may be highly beneficial in raising the energy efficiency of thermal systems.

The originality of the research lies in the investigation of the Darcy–Forchheimer stagnation point flow of a Williamson hybrid nanofluid across a vertical plate, considering buoyancy forces, which introduces another layer of complexity to the flow problem. This aspect has not been extensively studied before. The results are verified and offer a very favorable balance with the acknowledged papers.

The purpose of this paper is to study the steady biomagnetic hybrid nanofluid (HNF) of oxytactic microorganisms taking place over a thin needle with a magnetic field using the modified Buongiorno’s nanoliquid model.

On applying the appropriate similarity transformations, the governing partial differential equations were transformed into a set of ordinary differential equations. These equations have been then solved numerically using Runge–Kutta–Fehlberg method of fourth–fifth order programming in MAPLE software. Features of the velocity profiles, temperature distribution, reduced skin friction coefficient, reduced Nusselt number and microorganisms’ flux, for different values of the governing parameters were analyzed and discussed.

It was observed that as the needle thickness and solid volume fraction increase, the temperature rises, but the velocity field decreases. For a higher Peclet number, the motile microorganism curve increases, and for a higher Schmidt number, the concentration curve rises.

On applying the modified Buongiorno’s model, the present results are original and new for the study of HNF flow and heat transfer past a permeable thin needle.