Search results

An effective chemical conditioning technique was successfully tested and investigated to control and minimize the chemistry-related damages within mixed metallurgy steam and water cycle of Heller dry cooled combined cycle power plants (CCPPs), in which cooling water and condensate are completely mixed in direct contact condenser. This study aims to perform a comprehensive experimental research in four mixed metallurgy steam and water cycle.

A comprehensive experimental study was carried out in four mixed metallurgy steam and water cycle fabricated with ferrous- and aluminum-based alloys which have various corrosion resistance capabilities in contact with water. Chemical conditioning was conducted using both volatile and non-volatile alkalizing agents, and, to perform chemical conditioning effectively, quality parameters (pH, conductivity, dissolved oxygen, sodium, silica, iron, aluminum and phosphate) were monitored by analyzing grab and online samples taken at eight key sampling points.

Results indicated that pH was the most critical parameter which was not mainly within the recommended ranges of widely used standards and guidelines at all key sampling points that generally increases the occurrence of chemistry-related damages. The other quality parameters were mostly satisfactory.

In this research, the development of a suitable chemical conditioning technique in mixed metallurgy steam and water cycle, fabricated with ferrous and aluminum-based alloys, was studied. The obtained results in this thorough research work was evaluated by comparison with the chemistry limits of the widely used standards and guidelines, and combined use of volatile and solid alkalizing agents was considered as a promising chemical conditioning technique for utilization in mixed metallurgy units of Heller dry cooled CCPPs.

Examines the fourteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Several countries have carried out air quality monitoring in professional workplaces where chemicals are used. Health-care spaces have been less investigated. This paper aims to define a protocol, as developed by a research group, for inpatient rooms to understand the state of the art and to suggest design and management strategies for improving process quality.

Starting from the ISO-16000 standard and guidelines for monitoring activities, a protocol is defined for a one year investigation, with passive samplers. Through data analysis of the investigations and analysis of the cleaning and finishing products, heating, ventilation and air conditioning and maintenance activities, etc., it is possible to highlight the potential influences of chemical pollution.

A methodology is defined for understanding the chemical pollution and the possible factors related to construction materials, cleaning products and maintenance activities.

The paper analyzes only a limited number of case studies because the monitoring activity is still in progress.

The investigation offers a starting point for a wide tool for the definition of design, maintenance and management strategies in health-care facilities.

The research project, aimed at improving the knowledge of indoor air quality (IAQ) in inpatient rooms, is a starting point for a supporting tool for future regulations concerning health-care facilities.

IAQ is an issue on which many governments are focusing. Several health-care researchers have reported studies that aim at improving users’ health. Most investigations are about biological and physical risks, but chemical risks have been less studied. The paper suggests some design and management strategies for inpatient room.

Examines the thirteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Compiled by K.G.B. Bakewell covering the following journals published by MCB University Press: Facilities Volumes 8‐18; Journal of Property Investment & Finance Volumes 8‐18; Property Management Volumes 8‐18; Structural Survey Volumes 8‐18.

Index by subjects, compiled by K.G.B. Bakewell covering the following journals: Facilities Volumes 8‐18; Journal of Property Investment & Finance Volumes 8‐18; Property Management Volumes 8‐18; Structural Survey Volumes 8‐18.

Compiled by K.G.B. Bakewell covering the following journals published by MCB University Press: Facilities Volumes 8‐18; Journal of Property Investment & Finance Volumes 8‐18; Property Management Volumes 8‐18; Structural Survey Volumes 8‐18.

Compiled by K.G.B. Bakewell covering the following journals published by MCB University Press: Facilities Volumes 8‐18; Journal of Property Investment & Finance Volumes 8‐18; Property Management Volumes 8‐18; Structural Survey Volumes 8‐18.

Examines the fifthteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

The purpose of this paper is to implement the corrosion protection method for steel pipes used in a municipal water-pipe network. Results of an inhibitor protection system installed on the system are presented. Inhibitor protection was required due to the high corrosivity of the water collected by a surface intake, which had resulted in a large number of failures and low water quality, due to the presence of corrosion products.

To assess the effectiveness of protection and to control the optimum dose of the inhibitor dispensed, an automatic system of corrosion monitoring was used, together with an assessment of water corrosiveness based on measurements of physical and chemical properties of water.

Calcium polyphosphate, in the role of a non-toxic corrosion inhibitor, showed significant effectiveness as a anticorrosive and its results were fully noticeable after several years following the commencement of protection. Corrosion monitoring has shown that the effectiveness of inhibitor protection is highest in the summer season, when the water is characterised as being in its most corrosive form.

A reduction in the corrosion rate improves the quality of water and its chemical parameters fall within the standard range for water intended for consumption. The corrosion inhibitor action accelerates the formation of a layer limiting the corrosion rate. In this case, stable corrosion rates may be obtained after only the first year. In terms of the designing systems for monitoring corrosion in water systems, this is very important information as reliable results can be obtained for a long period after the launch of the system.