Search results

This study aims to provide a microfluidic blood glucose sensing platform based on integrated interdigitated electrode arrays (IDEAs) on a flexible quartz glass substrate, adhering closely to pertinent electrochemical characterizations.

Sensors are the key elements of the modern electronics era through which all the possible physical quantities can be detected and converted into their equivalent electrical form and processed further. But to make the sensing environment better, various types of innovative architectures are being developed nowadays and among them interdigitated electrodes are quite remarkable in terms of their sensing capability. They are a well-qualified candidate in the field of gas sensing and biosensing, but even their sensitivities are getting saturated due to their physical dimensions. Most of the thin film IDEAs fabricated by conventional optical lithographic techniques do not possess a high surface-to-volume ratio to detect the target specified and that reduces their sensitivity factor. In this context, a classic conductive carbon-based highly sensitive three dimensional (3D) IDEA-enabled biosensing system has been conceived on a transparent and flexible substrate to measure the amount of glucose concentration present in human blood. 3D IDEA possesses a way better capacitive sensing behavior compared to conventional thin film microcapacitive electrodes. To transmit the target biological analyte sample property for the detection purpose to the interdigitated array-based sensing platform, the design of a microfluidic channel is initiated on the same substrate. The complex 3D Inter Digital array structure improves the overall capacitance of the entire sensing platform and the reactive surface area as well. The manufactured integrated device displays a decent value of sensitivity in the order of 5.6 µA mM⁻¹ cm⁻².

Development of a low-cost array-based integrated and highly flexible microfluidic biochip to extract the quantity of glucose present in human blood.

Potential future research opportunities in the realm of integrated miniaturized, low-cost smart biosensing systems may arise from this study.

Ultracapacitors find extensive applications in various fields because of their high energy density and long cycling periods. However, due to the movement of ions and the arrangement patterns on rough/irregular electrode surfaces during the charge and discharge process of ultracapacitors, the parameters of ultracapacitors usually change with the variation of operating conditions. The purpose of this study is to accurately and quickly identify the parameters of ultracapacitors.

A variable forgetting factor recursive least square (VFFRLS) algorithm is proposed in this paper for online identifying the equivalent series resistance and capacitance C of ultracapacitors. In this work, a real-time error-based strategy is developed to adaptively regulate the value of the forgetting factor of traditional forgetting factor recursive least square (FFRLS) algorithm. The strategy uses the square of the average time autocorrelation estimation of the prior error and the posterior error between the predicted output and the actual output as the adjustment basis of forgetting factors.

Experiments were conducted using the proposed scheme, and the results were compared with the estimation results obtained by the recursive least squares (RLS) algorithm and the traditional FFRLS algorithm. The maximum root mean square error between the estimated values and actual values for VFFRLS is 3.63%, whereas for FFRLS it is 9.61%, and for RLS it is 19.33%.

By using the proposed VFFRLS algorithm, a relatively high precision can be achieved for the online parameter estimation of ultracapacitors. Besides, the dynamic balance between parameter stability and tracking performance can be validated by dynamically adjusting the forgetting factor.

This paper numerically investigates the effect of cavity radiation on the thermal response of hollow aluminium tubes and facade systems subjected to fire.

Finite element simulations were performed using ABAQUS 6.14. The accuracy of the numerical model was established through experimental and numerical results available in the literature. The proposed numerical model was utilised to study the effect of cavity radiation on the thermal response of aluminium hollow tubes and facade system. Different scenarios were considered to assess the applicability of the commonly used lumped capacitance heat transfer model.

The effects of cavity radiation were found to be significant for non-uniform fire exposure conditions. The maximum temperature of a hollow aluminium tube with 1-sided fire exposure was found to be 86% greater when cavity radiation was considered. Further, the time to attain critical temperature under non-uniform fire exposure, as calculated from the conventional lumped heat capacity heat transfer model, was non-conservative when compared to that predicted by the proposed simulation approach considering cavity radiation. A metal temperature of 550 °C was attained about 18 min earlier than what was calculated by the lumped heat capacitance model.

The present study will serve as a basis for the study of the effects of cavity radiation on the thermo-mechanical response of aluminium hollow tubes and facade systems. Such thermo-mechanical analyses will enable the study of the effects of cavity radiation on the failure mechanisms of facade systems.

Cavity radiation was found to significantly affect the thermal response of hollow aluminium tubes and façade systems. In design processes, it is essential to consider the potential consequences of non-uniform heating situations, as they can have a significant impact on the temperature of structures. It was also shown that the use of lumped heat capacity heat transfer model in cases of non-uniform fire exposure is unsuitable for the thermal analysis of such systems.

This is the first detailed investigation of the effects of cavity radiation on the thermal response of aluminium tubes and façade systems for different fire exposure conditions.

The purpose of this paper is to investigate the effect of plasma electrolytic oxidation (PEO) coatings and sealed PEO coatings on the corrosion resistance and cytocompatibility of a novel Mg-1Zn-0.45Ca alloy in simulated body fluid (SBF).

The microstructure, corrosion resistance and cytocompatibility of PEO coatings and phosphate conversion-treated PEO coatings were investigated and was compared with the bare Mg alloy.

The hot-extruded Mg-Zn-Ca alloy exhibit inhomogeneous microstructure and suffered from localized corrosion in the SBF. The PEO coating after phosphate conversion treatment offers enhanced protectiveness to the Mg alloy within an immersion period of up to 60 days, which is significantly improved compared with the performance of the PEO-coated Mg alloy, but the cytocompatibility was slightly decreased.

This work offers new perspective in balancing the protectiveness and cytocompatibility of bio-materials.

The purpose of this study is to provide ideas and theoretical guidance for green, environmentally friendly and efficient “bacteriostasis with bacteria” technology.

In this paper, a beneficial strain of bacteria was extracted and purified from marine mud. Weight-loss test, morphological observation and electrochemical test were used to systematically study the effect of sulfate-reducing bacteria (SRB)-induced corrosion inhibition on X65 steel in simulated offshore oil field production water.

The results showed that a beneficial strain was selected and identified as Vibrio alginolyticus. Under the condition of co-culture of SRB, the average corrosion rate of X65 steel was significantly reduced. In the mixed bacterial system, the surface of X65 steel samples was relatively flat, and the structure of biofilm and corrosion product film was dense. The number of corrosion pits, the average diameter and depth of corrosion pits were significantly reduced. The localized corrosion of X65 steel was significantly inhibited.

The complex and changing marine environment makes the corrosion problem of marine steel increasingly severe, and the microbiologically influenced corrosion (MIC) caused by SRB is particularly serious. The research and development of environmentally friendly corrosion protection technology is a long-term and difficult problem. The use of beneficial microorganisms to control MIC is a green and efficient anticorrosion measure. Compared with terrestrial microorganisms, marine microorganisms can adapt to complex environments, and their metabolites exhibit special biological activities. The use of marine beneficial bacteria can inhibit SRB activity to achieve the corrosion inhibition effect.

Early prediction of any type of cancer is important for the treatment of this type of disease, therefore, our target to evaluate whether monitoring early changes in plasma human epidermal growth factor receptor 2 (HER2) levels (using EIS), could help in the treatment of breast cancer or not? Human epidermal growth factor receptor 2 (HER2) overexpression is an important biomarker for treatment selection in earlier stages of cancers. The combined detection of the HER2 gene in plasma for blood cancer provides an important reference index for the prognosis of metastasis to other tissues. For this purpose, the authors fabricated and characterized a model wireless biosensor-based electrochemical impedance spectroscopy (EIS) for detecting HER2 plasma as therapeutics.

Most sensors generally are fabricated based on a connection between component of the sensors and the external circuits through wires. Although these types of sensors provide suitable sensitivities and also quick responses, the connection wires can be limited to the sensing ability in various devices approximately. Therefore, the authors designed a wireless sensor, which can provide the advantages of in vivo sensing and also long-distance sensing, quickly.

The biosensor structure was designed for detection of HER2, HER3 and HER-4 from lab-on-chip approach with six units of screen-printed electrode (SPE), which is built of an electrochemical device of gold/silver, silver/silver or carbon electrodes. The results exhibited that the biosensor is completely selective at low concentrations of the plasma and HER2 detection via the standard addition approach has a linearity plot, therefore, by using this type of biosensors HER2 in plasma can be detected.

This is then followed by detecting HER2 in real plasma using standard way which proved to have great linearity (R² = 0.991) proving that this technique can be used to detect HER2 solution in real patients.

The effect of viscosity on the performance of disk-shaped electromechanical resonators has been studied and investigated in the past. The vibration frequency of a disk-shaped resonator changes according to the viscosity of the liquid which the resonator is in contact with. Therefore, the purpose of this paper is based on design a sensor for measuring the viscosity of liquids using a disk-shaped electromechanical resonator. The viscosity of liquids is of interest to researchers in industry and medicine.

In this paper, a viscosity sensor for liquids is proposed, which is designed based on a disk-shaped electromechanical resonator. In this proposed sensor, two comb drives are used as electrostatic actuators to stimulate the resonator. Also, two other comb drives are used as electrostatic sensors to monitor the frequency changes of the proposed resonator. The resonance frequency of the resonator in response to different fluids under test varies according to their viscosity.

After calibration of the proposed sensor by nonlinear weights, the viscosity of some liquids are calculated using this sensor and results confirm its accuracy according to the liquids real viscosity.

The design of the proposed sensor and its simulated performance are reported. Also, the viscosity of several different liquids are evaluated with simulations of the proposed sensor and presented.

The purpose of this study is to provide a highly efficient method to obtain the kinetics of the hydrogen evolution reaction (HER) on metal electrodes in an alkaline solution and to analyze the effect of thiourea addition on HER under the same cathodic overpotential.

A novel method based on hydrogen permeation tests, potentiodynamic polarization tests and electrochemical impedance spectroscopy was put forward to characterize the HER kinetics on metal electrode.

The study found that adding thiourea accelerated the Volmer, Heyrovsky and Tafel reactions associated with HER. In addition, it reduced the hydrogen surface coverage and increased the hydrogen permeation steady-state current density. As a result, thiourea facilitated HER, promoted the diffusion of hydrogen atoms into iron and reduced the number of hydrogen atoms in the adsorbed state.

This work provides novel insights into the influence of thiourea on HER kinetics, demonstrating that thiourea addition can significantly enhance HER efficiency by altering reaction dynamics and promoting hydrogen atom diffusion into iron. This has implications for hydrogen energy applications, cathodic protection and understanding hydrogen embrittlement mechanisms.

This study aims to report the development and experimental evaluation of two kinds of PANI@semiconductor based photocathodic anti-corrosion coating, for application on stainless steel substrates.

PANI was in situ chemical polymerized on TiO₂ and BiVO₄ particles, and FT-IR and SEM/EDS were used to understand the characteristics and elemental distribution of the composite particles. Composite coatings, which consisted of epoxy, PANI@TiO₂ or PANI@BiVO₄ and graphene, were prepared on the 304L stainless steel. Photoelectrochemical response measurement, electrochemical tests and immersion tests were used to assess the anti-corrosion performance of the prepared coatings in 45°C 3.5 wt.% NaCl solution. And the corrosion protection mechanism was further explained by combining with surface observation.

The photoelectrochemical response tests revealed the good photocathodic effect of the coatings, and the reversible oxidation-reduction properties of PANI (pseudocapacitive effect) leading to the repeated usage of the coatings. Consequently, the anti-corrosion mechanism of the composite coating is attributed to the physical barrier effect of the coating, the anodic protection effect of PANI and the photocathodic and energy store effect.

These kind coatings could prevent corrosion from day to night for stainless steel, which has great engineering application prospects on stainless steel corrosion protection.

This paper aims to numerically examine the impact of gyrotactic microorganisms and radiation on heat transport features of magnetic nanoliquid within a closed cavity. Thermophoresis, chemical reaction and Brownian motion are also considered in flow geometry for the moment of nanoparticles.

Finite element method (FEM) was depleted to numerically approximate the temperature, momentum, concentration and microorganisms concentration of the nanoliquid. The present simulation was unsteady state, and the resulting transformed equations are simulated by FEM-based Mathematica algorithm.

It has been found that isotherm patterns get larger with increasing values of the magnetic field parameter. Additionally, numerical codes for rate of heat transport impedance inside the cavity with an increasing Brownian motion parameter values.

To the best of the authors’ knowledge, the research work carried out in this paper is new, and no part is copied from others’ works.