Search results

Online fashion retailers offer body measurement guidance, alongside their target consumer body size charts and fit information, to help consumers select the right size garment as the garment cannot be tried on. Its use by retailers suggests it can act as a means of mitigating garment returns as there has been a noted increase in returns due to incorrect size selection even though body measurement instructions are provided online. The purpose of this research is to determine how consumers interact with body measurement guidance, how they interpret it and use it, thereby interrogating its efficacy.

An exploratory investigation was undertaken. Thirty participants were recruited and given a choice of fashion retailers' body measurement guidance and a tape measure. They took their body measurements over their clothes. A technician repeated the task, thereby providing two sets of body measurements. A paired t-test determined if there was a significant difference in both values in terms of their mean. Technicians also documented their observations of how the participants interacted with the task. The content of the fashion retailer measurement guidance was then compared to that of published anthropometric guidance for surveys.

Participants were familiar with the guidance and tape-measure; they were able to self-measure. The fashion retailer measurement guidance, however, lacked detail/clarity in visuals and written content when compared to anthropometric guidance. Interpretation of the guidance differed between participant and technician. This resulted in a significant difference in circumference measurements for the bust/chest and hips, yet no significant difference in waist and inside-leg measurements. For measurements that were difficult to take unaided, participants devised novel practices which resulted in little divergence from the technician taken body measurements. The results question the guidance efficacy in its current form.

There has been no study which addresses how consumers interpret and interact with fashion retailers' online measurement guidance. This is important as this can mitigate garment returns. This research provides insight to influence fashion retailers' measurement guidance policy. It also adds to the existing body of knowledge surrounding anthropometric practice for clothing.

The findings indicated that fashion retailers need to revise their body measurement guidance content. The content needs to be more comprehensive but still use accessible language and visuals. The broader implications of this study highlight that traditional anthropometrics for self-taken body measurement needs developing as an emerging concept through clothing-related academic study.

Fashion retailers' measurement guidance needs to be more comprehensive but still use accessible language and visuals. The broader implications of this study highlight that traditional anthropometrics for self-taken body measurement needs further investigation and documentation as an emerging concept through clothing-related academic study.

This paper aims to investigate fit problems with some ready-to-wear garments, analyse the body measurements of Ethiopian young female consumers and draw implications for the improvement of ready-to-wear garment fit.

A random sample of 970 university students aged 18–35 years were interviewed, and their 35 body dimensions were measured manually according to the procedures in ISO 8559: 2017. The fit problems and body measurements were examined with the body mass index (BMI) and ethnicity of the subjects. Moreover, 15 body dimensions were compared with that of Chinese and US females of similar age.

The results showed that fit problems are frequent in lower garments for underweight consumers. Nearly consistent and smaller differences in body measurements were observed with BMIs and ethnicity of the subjects, while inconsistent and larger differences were found among the subjects from the three countries. The Ethiopian subjects were smaller than the Chinese in height and weight, between the Chinese and US females in most body measurements, and larger than the US subjects in across shoulder and arm and shoulder lengths. The results alarm the need for the development of Ethiopian national garment size standards.

The paper relates ready-to-wear garment fit issues to demographic factors and demographic factors to body measurements. Moreover, it considers young female consumers in Ethiopia, an African country with less explored consumer needs for clothing.

The circular economy (CE) has been endorsed as representing a model that is able to achieve environmental protection through decreased use of raw materials, together with changing economic values and social inclusion thanks to its demand for a wide variety of skill profiles. This has motivated many policy initiatives to support the implementation of the CE. The purpose of this study is to follow such policy initiatives in three geographically anchored industry-specific networks.

The study contributes to the research debate on the CE through a spatial approach with a focus on how the implementation of the CE is conditioned by spatial and regional contexts. The authors investigate three different networks in Sweden for CE with different locations and industrial profiles.

The findings reveal the difficulty that exist in relation to the implementation of the CE. The network and support functions in combination with private industry are vital. The risk of sustaining an uneven regional economic development is evident.

Although research on the development of the CE has proliferated, geographical approaches to this development are comparably rare to date. The authors seek to contextualise the strategy development and policy implementation of a CE policy.

This research paper aims to provide a comprehensive analysis of the ergonomic risks faced by employees in the IT industry who work from home (WFH). With the increasing prevalence of remote work, understanding and addressing ergonomic challenges are crucial to ensure the well-being, productivity and long-term health of IT professionals.

The data are gathered through a survey questionnaire which includes demographic factors, job-related factors, quick video display terminal (VDT) workspace evaluation factors, quick chair design usability evaluation factors and the Cornell Musculoskeletal Discomfort Questionnaire (CMDQ) in order to measure the ergonomic risks among them. The risk factors associated with each body part are determined using ordinal logistic regression.

Highest occurrence of musculoskeletal disorders was observed in the neck, hip and lower back among WFH employees. By identifying and prioritizing these risks, organizations and individuals can implement effective strategies to promote a healthy and ergonomic work environment for remote IT employees.

This research contributes new insights that will be helpful for researchers and practitioners working in the areas of ergonomic risks, improving performance of work from home employees and provides suggestions for future research to explore and enrich the existing knowledge base.

The purpose of this paper is to determine the effect of clothing fabrics, sizes and air ventilation rate on the volume and thickness of the air gap under the air ventilation garments (AVGs).

The geometric models of the human body and clothing were obtained by using a 3D body scanner. Then the distribution of the volume and thickness of the air gap for four clothing fabrics and three air ventilation rates (0L/S, 12L/S and 20L/S) were calculated by Geomagic software. Finally, a more suitable fabric was selected from the analysis to compare the distribution of the air gap entrapped for four clothing sizes (S, M, L and XL) and the three air ventilation rates.

The results show that the influence of air ventilation rate on the air gap volume and thickness is more obvious than that of the clothing fabrics and sizes. The higher is the air ventilation rate, the thicker is the air gap entrapped, and more evenly distributed is the air gap. It can be seen that the thickness of the air gap in the chest does not change significantly with the changes of the air ventilation rates, clothing fabrics and sizes, while the air gap in the waist is affected significantly.

This research provides a better understanding of the distribution of the air gap entrapped in ventilated garments, which can help in designing the optimal air gap dimensions and thus provide a basis and a reference for the design of the AVGs.

Researchers have tried analysing how the organizations’ practices of doing good can help improve their employees’ satisfaction over the past couple of decades. Employee satisfaction has a complicated relationship with a company’s corporate social responsibility (CSR) activities. Subsequently, the purpose of this paper is to conduct a bibliometric analysis and a literature review to trace the links between CSR and employee satisfaction, summarize and analyse the advances in this field, the knowledge gaps, publishing trends and further directions for future research.

The authors conducted a bibliometric analysis followed by a literature review of papers indexed in the Scopus database and published between 2000 and 2022. A total of 233 papers were identified, while 152 of them met the inclusion criteria for the analysis.

The subsequent analysis sheds light on the overlaps and connections between the two phenomena in human resource management (HRM). The authors outline potential avenues for future research and practical insight into how to leverage CSR activities for increasing work satisfaction.

By detailing the different ways CSR and employee satisfaction impact one another, analysing their relations and other supporting constructs, the authors contribute to the academic discourse by synthesizing prevailing literature and introducing practical guides for human resource (HR) professionals, managers and executives to manage turbulent surroundings more effectively, considering the major disruptions post-COVID-19 and the adoption of advanced technologies.

Sex and age estimation is important, particularly when information about the deceased is unavailable. There are limited radiological studies investigating side, sex and age differences in normal ankle morphometric parameters. The authors’ goal was to evaluate different ankle joint morphometric measurements and document variations among Egyptians.

A prospective study was conducted throughout 23 months on 203 (100 males and 103 females) adult Egyptians, aged between 20-69 years old, who were referred for a plain x-ray of bilateral normal ankle joints.

Ankle parameters showed no statistical difference between both sides, except for tarsal width (TaW) which was significantly higher on right than left side (26.92 ± 2.66 vs 26.18 ± 2.65 mm). Males showed significantly higher morphometric values except for anteroposterior gap (APG) and talus height (TaH) which were significantly higher in females (2.29 ± 0.80 vs 1.80 ± 0.61 mm and 13.01 ± 1.68 vs 11.87 ± 1.91 mm, respectively). There was significant increase in tibial arc length, APG, distance of level of MTiTh from anterior limit of mortise, distance of level of MTiTh from vertex of mortise, sagittal distance between tibial and talar vertices and sagittal radius of trochlea tali arc in old age group compared to young one. A significant decrease in tibial width, malleolar width, TaW and TaH was noted in old age group compared to young one.

Ankle joints of both sides are mostly symmetrical; however, there are significant differences in most morphometric values due to sex and age factors. These findings may be essential during side, sex and age determination.

This research explored the intersection of cognitive processes, emotions and their impacts on digital game-based vocabulary learning (DGVL) among university students. Recognizing the scant research in this area, especially with integrating innovative technologies, this study aims to understand the influence of these elements using advanced monitoring tools.

This inquiry was carried out as an observational study involving 44 university students segmented into three English language proficiency levels: high, intermediate and low based on their English course scores. The methodological tools included a portable eye tracker to observe visual behaviors and deep learning technology to identify and analyze the participants’ emotional responses and engagement with the DGVL during the learning process.

The results showed that distinct fixation sequences and variations in visual attention during DGVL were correlated with different levels of competency, suggesting a direct correlation between visual engagement and language competence. In addition, emotional transitions, predominantly from engagement (“flow”) to challenge (“frustration”), were common among participants, reflecting the emotional dynamics of learning. Furthermore, all participants consistently focused on the English vocabulary definitions, indicative of their targeted approach to understanding and test preparation. These findings highlighted the intricate dynamics between emotions and cognitive processes in learning environments.

Contribution of this study shows the interplay of cognitive engagement and emotional experiences in the context of DGVL. It underscored the complex nature of these factors and their collective influence on learners’ visual and emotional engagement, offering valuable implications for educational strategies and technological applications in language learning.

This study aims to create and deform 3D garment apparel in an immersive virtual reality using head-mounted display and controllers. For this, adequate design methods for immersive virtual environment were explored and developed in order to confirm the suitability of the developed methods.

An immersive virtual environment was prepared using Unreal Engine (UE) version 5.1 and Meta Human Lexi to create template garment that corresponds to the sizes of a human model. Dual quaternion skinning was adopted for pose deformation. For size deformation, patches were constructed with the measurement lines defined on Lexi. This patch-based approach was adopted not only for automatic generation but also for flat pattern projection of the template garment.

The research found that garment-making process can be brought into immersive virtual reality. Free use of one's hands and body made apparel deformation in an immersive environment conform with the real garment draping process.

Simulating garment making in an immersive virtual reality has not previously been explored in detail. This research discovered, implemented and tested methods that best suit the environment where head-mounted display and controllers are essential in detail.

Sizing system is a fundamental topic in garment fitting. The purpose of this study was to assess the fit of existing police uniforms (shirt, jacket, overcoat and trousers) and develop a sizing system for upper and lower body uniforms of Amhara policemen in Ethiopia.

In total, 35 body dimensions of 889 policemen were taken through a manual anthropometric survey following the procedures in ISO 8559:1989 after each subject was interviewed on issues related to garment fit. The anthropometric data were pre-processed, key body dimensions were identified by principal components analysis and body types were clustered by the agglomerative hierarchical clustering algorithm and verified by the XGBoost classifier in a Python programming environment. The developed size charts were validated statistically using aggregate loss and accommodation rate.

About 44% of the subjects encountered fit problems every time they own new readymade uniforms. Lengths and side seams of shirts, and lengths and waist girths of trousers are the most frequently altered garment sites. Analysis of the anthropometric measurements resulted in 13 and 15 sizes for the upper and lower bodies, respectively. Moreover, the comparison of the developed upper garment size chart with the existing size chart for a shirt showed a considerable difference. This indicates that inappropriate size charts create fit problems.

The study considers the analysis of fit problems and sizing system development in a less researched country. Moreover, the proposed data mining procedure and its application for size chart development is unique and workable.