Search results

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

Safety management plays an important part in coal mine construction. Due to complex data, the implementation of the construction safety knowledge scattered in standards poses a challenge. This paper aims to develop a knowledge extraction model to automatically and efficiently extract domain knowledge from unstructured texts.

Bidirectional encoder representations from transformers (BERT)-bidirectional long short-term memory (BiLSTM)-conditional random field (CRF) method based on a pre-training language model was applied to carry out knowledge entity recognition in the field of coal mine construction safety in this paper. Firstly, 80 safety standards for coal mine construction were collected, sorted out and marked as a descriptive corpus. Then, the BERT pre-training language model was used to obtain dynamic word vectors. Finally, the BiLSTM-CRF model concluded the entity’s optimal tag sequence.

Accordingly, 11,933 entities and 2,051 relationships in the standard specifications texts of this paper were identified and a language model suitable for coal mine construction safety management was proposed. The experiments showed that F1 values were all above 60% in nine types of entities such as security management. F1 value of this model was more than 60% for entity extraction. The model identified and extracted entities more accurately than conventional methods.

This work completed the domain knowledge query and built a Q&A platform via entities and relationships identified by the standard specifications suitable for coal mines. This paper proposed a systematic framework for texts in coal mine construction safety to improve efficiency and accuracy of domain-specific entity extraction. In addition, the pretraining language model was also introduced into the coal mine construction safety to realize dynamic entity recognition, which provides technical support and theoretical reference for the optimization of safety management platforms.

The purpose of this study is to evaluate the effect of graphene, basalt flakes and their synergy on the corrosion resistance of zinc-rich coatings. As the important heavy-duty anticorrosion coatings, zinc-rich coatings provided cathodic protection for the substrate. However, to ensure cathodic protection, a large number of zinc powder made the penetration resistance known as the weakness of zinc-rich coatings. Therefore, graphene and basalt flakes were introduced into zinc-rich coatings to coordinate its cathodic protection and shielding performance.

Three kinds of coatings were prepared; they were graphene modified zinc-rich coatings, basalt flakes modified zinc-rich coatings and graphene-basalt flakes modified zinc-rich coatings. The anticorrosion behavior of painted steel was studied by using the electrochemical impedance spectroscopy (EIS) technique in chloride solutions. The equivalent circuit methods were used for EIS analysis to obtain the electrode process structure of the coated steel system. Simultaneously, the corrosion resistance of the three coatings was evaluated by water resistance test, salt water resistance test and salt spray test.

The study found that the addition of a small amount of graphene and basalt flakes significantly improved the anticorrosion performance of coatings by enhancing their shielding ability against corrosive media and increasing the resistance of the electrochemical reaction. The modified coatings exhibited higher water resistance, salt water resistance and salt spray resistance. The graphene-basalt flakes modified zinc-rich coatings demonstrated the best anticorrosion effect. The presence of basalt scales and graphene oxide in the coatings significantly reduced the water content and slowed down the water penetration rate in the coatings, thus prolonging the coating life and improving anticorrosion effects. The modification of zinc-rich coatings with graphene and basalt flakes improved the utilization rate of zinc powder and the shielding property of coatings against corrosive media, thus strengthening the protective effect on steel structures and prolonging the service life of anticorrosion coatings.

The significance of developing graphene-basalt flakes modified zinc-rich coatings lies in their potential to offer superior performance in corrosive environments, leading to prolonged service life of metallic structures, reduced maintenance costs and a safer working environment. Furthermore, such coatings can be used in various industrial applications, including bridges, pipelines and offshore structures, among others.

As after-hours technology-mediated work (ATW) becomes common in organizations, the increased workload and interference to life caused by ATW has induced employee turnover. This research develops a mediated moderation model to explain how employees' intrinsic and extrinsic motivations for ATW affect their turnover intention through work–life conflict.

A survey was conducted to collect data of 484 employees from Chinese companies. Partial Least Square was used to perform data analysis.

The results show that intrinsic motivation for ATW has an indirect negative impact on turnover intention via work–life conflict, whereas extrinsic motivation for ATW has both a positive direct impact and a positive indirect impact (via work–life conflict) on turnover intention. This study also helps find that time spent on ATW can strengthen the positive impact of extrinsic motivation for ATW on turnover intention but has no moderation effect on the impact of intrinsic motivation for ATW. Furthermore, this study reveals that the interaction effect of time spent on ATW and extrinsic motivation on turnover intention is mediated by employees' perceived work–life conflict.

By discovering the distinct impact of employees' intrinsic and extrinsic motivations for ATW on turnover intention, this research provides a contingent view regarding the impact of ATW and offers guidance to managers regarding how to mitigate ATW-induced turnover intention through fostering different motivations.

Positive reviews can enrich the favorable impression of peer-to-peer accommodation products, and seizing this impression is vital for hosts. This study aims to focus on hosts’ response strategies to positive reviews and their effects.

This study categorizes hosts’ response strategies to positive reviews into cordial and tailoring responses. This study empirically analyzes the influence of these response strategies on subsequent review volumes using 1,283 valid listings and zero-inflation negative binomial regression models.

While hosts use cordial responses more, tailoring responses are more likely to drive subsequent reviews. In addition, when the host chooses entirely shared accommodation or sets a high price, the facilitating effect of the two response strategies on subsequent reviews weakens.

This study enriches the knowledge system on managerial responses by proposing two specific response strategies to positive reviews that can be adopted by peer-to-peer accommodation hosts and by finding the promoting impact of these strategies on subsequent review volumes.

This study recommends that peer-to-peer accommodation hosts adopt cordial and tailoring responses to encourage subsequent consumer reviewing behavior.

As an early attempt to explore hosts’ responses to positive reviews and their impacts on subsequent review volumes, this study provides valuable insights into further research on positive review response strategies in the digital space.

As it is known, the electrostatic discharge (ESD) protection design of integrated circuit is very important, among which the silicon controlled rectifier (SCR) is one of the most commonly used ESD protection devices. However, the traditional SCR has the disadvantages of too high trigger voltage, too low holding voltage after the snapback and longer turn-on time. The purpose of this paper is to design a high-performance SCR in accordance with the design window under 0.25 µm process, and provide a new scheme for SCR design to reduce the trigger voltage, improve the holding voltage and reduce the turn-on time.

Based on the traditional SCR, an RC-INV trigger circuit is introduced. Through theoretical analysis, TCAD simulation and tape-out verification, it is shown that RC-INV triggering SCR can reduce the trigger voltage, increase the holding voltage and reduce the turn-on time of the device on the premise of maintaining good robustness.

The RC-INV triggering SCR has great performance, and the test shows that the transmission line pulse curve with almost no snapback can be obtained. Compared with the traditional SCR, the trigger voltage decreased from 32.39 to 16.24 V, the holding voltage increased from 3.12 to 14.18 V and the turn-on time decreased from 29.6 to 16.6 ns, decreasing by 43.9% the level of human body model reached 18 kV+.

Under 0.25 µm BCD process, this study propose a high-performance RC-INV triggering SCR ESD protection device. The work presented in this paper has a certain guiding significance for the design of SCR ESD protection devices.

The grasping task of robots in dense cluttered scenes from a single-view has not been solved perfectly, and there is still a problem of low grasping success rate. This study aims to propose an end-to-end grasp generation method to solve this problem.

A new grasp representation method is proposed, which cleverly uses the normal vector of the table surface to derive the grasp baseline vectors, and maps the grasps to the pointed points (PP), so that there is no need to add orthogonal constraints between vectors when using a neural network to predict rotation matrixes of grasps.

Experimental results show that the proposed method is beneficial to the training of the neural network, and the model trained on synthetic data set can also have high grasping success rate and completion rate in real-world tasks.

The main contribution of this paper is that the authors propose a new grasp representation method, which maps the 6-DoF grasps to a PP and an angle related to the tabletop normal vector, thereby eliminating the need to add orthogonal constraints between vectors when directly predicting grasps using neural networks. The proposed method can generate hundreds of grasps covering the whole surface in about 0.3 s. The experimental results show that the proposed method has obvious superiority compared with other methods.

The purpose of this study is to investigate the application of non-destructive testing methods in measuring bearing oil film thickness to ensure that bearings are in a normal lubrication state. The oil film thickness is a crucial parameter reflecting the lubrication status of bearings, directly influencing the operational state of bearing transmission systems. However, it is challenging to accurately measure the oil film thickness under traditional disassembly conditions due to factors such as bearing structure and working conditions. Therefore, there is an urgent need for a nondestructive testing method to measure the oil film thickness and its status.

This paper introduces methods for optically, electrically and acoustically measuring the oil film thickness and status of bearings. It discusses the adaptability and measurement accuracy of different bearing oil film measurement methods and the impact of varying measurement conditions on accuracy. In addition, it compares the application scenarios of other techniques and the influence of the environment on detection results.

Ultrasonic measurement stands out due to its widespread adaptability, making it suitable for oil film thickness detection in various states and monitoring continuous changes in oil film thickness. Different methods can be selected depending on the measurement environment to compensate for measurement accuracy and enhance detection effectiveness.

This paper reviews the basic principles and latest applications of optical, electrical and acoustic measurement of oil film thickness and status. It analyzes applicable measurement methods for oil film under different conditions. It discusses the future trends of detection methods, providing possible solutions for bearing oil film thickness detection in complex engineering environments.

This paper studies the optimal decision-making and coordination problem of a dual-channel fresh agricultural product (FAP) supply chain. The purpose is to analyze the impact of information sharing on optimal decisions and propose a coordination mechanism to encourage supply chain members to share information.

The two-echelon dual-channel FAP supply chain includes a manufacturer and a retailer. By using the Stackelberg game theory and the backward induction method, the optimal decisions are obtained under information symmetry and asymmetry and the coordination contract is designed.

The results show that supply chain members should comprehensively evaluate the specific situation of product attributes, coefficient of freshness-keeping cost and network operating costs to make decisions. Asymmetric information can exacerbate the deviation of optimal decisions among supply chain members and information sharing is always beneficial to manufacturers but not to retailers. The improved revenue-sharing and cost-sharing contract is an effective coordination mechanism.

The conclusions can provide theoretical guidance for supply chain managers to deal with information asymmetry and improve the competitiveness of the supply chain.

This paper combines the three characteristics that are most closely related to the reality of supply chains, including horizontal and vertical competition of different channels, the perishable characteristics of FAPs and the uncertainty generated by asymmetric demand information.

This study aims to investigate how sports customers adopted over-the-top (OTT) services to consume sport content. Inspired by the technology acceptance model (TAM), the study aims to understand users' behavior when consuming sporting events and users' perceptions toward OTT services.

The participants of the study are Chinese sports consumers that use streaming services to watch live sport content. An online survey was distributed through HUPU Sports, a Chinese online communication community where sports fans can share opinions. To make sure all responses qualified to take part in the study, skip logic questions were added at the beginning of the questionnaire to ask participants to answer whether they used streaming services for watching sports. A total of 352 responses were received and there were 327 useable questionnaires.

The results revealed that viewing convenience, free of commercials and viewing quality were the main reasons impacting them to adopt OTT services. In terms of users' perceptions, paid users rated higher in perceived enjoyment, perceived value, perceived usefulness (PU) and ease of use than nonpaid users. OTT users' fandom and PU could predict the time the users spent on using these services, while the users' fandom and perceived value are positively related to the money users spent on these services. In addition, this study also found that users' fandom, perceived value, content quality, and ease of use are positively associated with users' intention to continue to use the service.

The study is one of the first attempts to explore how sports audiences adopted OTT services to consume sport content and explore the audiences' perceptions toward OTT usage. Previous studies have already investigated how users adopted music streaming services (Fernandes and Guerra, 2019) and other online streaming services (Shin and Park, 2021), but little attention has been given to sports streaming services specifically. Therefore, the findings of the study fill the gap in the extant knowledge of sport consumers' behavior and provide more insights to their online behaviors. Moreover, the authors also contribute to the growing digital media literature by advancing our understanding perceptional differences between paid users and unpaid users. The streaming services literature has primarily focused on general users (Fernandes and Guerra, 2019), but the services neglect to understand the differences in between paid and unpaid users.