Search results

For prefabricated building construction, improper handling of the production scheduling for prefabricated components is one of the main reasons that affect project performance, which causes overspending, schedule overdue and quality issues. Prior research on prefabricated components production schedule has shown that optimizing the flow shop scheduling problem (FSSP) is the basis for solving this issue. However, some key resources and the behavior of the participants in the context of actual prefabricated components production are not considered comprehensively.

This paper characterizes the production scheduling of the prefabricated components problem into a permutation flow shop scheduling problem (PFSSP) with multi-optimization objectives, and limitation on mold and buffers size. The lean construction principles of value-based management (VBM) and just-in-time (JIT) are incorporated into the production process of precast components. Furthermore, this paper applies biogeography-based optimization (BBO) to the production scheduling problem of prefabricated components combined with some improvement measures.

This paper focuses on two specific scenarios: production planning and production rescheduling. In the production planning stage, based on the production factor, this study establishes a multi-constrained and multi-objective prefabricated component production scheduling mathematical model and uses the improved BBO for prefabricated component production scheduling. In the production rescheduling stage, the proposed model allows real-time production plan adjustments based on uncertain events. An actual case has been used to verify the effectiveness of the proposed model and the improved BBO.

With respect to limitations, only linear weighted transformations are used for objective optimization. In regards to research implications, this paper considers the production of prefabricated components in an environment where all parties in the supply chain of prefabricated components participate to solve the production scheduling problem. In addition, this paper creatively applies the improved BBO to the production scheduling problem of prefabricated components. Compared to other algorithms, the results show that the improved BBO show optimized result.

The proposed approach helps prefabricated component manufacturers consider complex requirements which could be used to formulate a more scientific and reasonable production plan. The proposed plan could ensure the construction project schedule and balance the reasonable requirements of all parties. In addition, improving the ability of prefabricated component production enterprises to deal with uncertain events. According to actual production conditions (such as the occupation of mold resources and storage resources of completed components), prefabricated component manufacturers could adjust production plans to reduce the cost and improve the efficiency of the whole prefabricated construction project.

The value of this article is to provide details of the procedures and resource constraints from the perspective of the precast components supply chain, which is closer to the actual production process of prefabricated components. In addition, developing the production scheduling for lean production will be in line with the concept of sustainable development. The proposed lean production scheduling could establish relationships between prefabricated component factory manufacturers, transportation companies, on-site contractors and production workers to reduce the adverse effects of emergencies on the prefabricated component production process, and promote the smooth and efficient operation of construction projects.

Metaheuristic algorithms based on biology, evolutionary theory and physical principles, have been widely developed for complex global optimization. This paper aims to present a new hybrid optimization algorithm that combines the characteristics of biogeography-based optimization (BBO), invasive weed optimization (IWO) and genetic algorithms (GAs).

The significant difference between the new algorithm and original optimizers is a periodic selection scheme for offspring. The selection criterion is a function of cyclic discharge and the fitness of populations. It differs from traditional optimization methods where the elite always gains advantages. With this method, fitter populations may still be rejected, while poorer ones might be likely retained. The selection scheme is applied to help escape from local optima and maintain solution diversity.

The efficiency of the proposed method is tested on 13 high-dimensional, nonlinear benchmark functions and a homogenous slope stability problem. The results of the benchmark function show that the new method performs well in terms of accuracy and solution diversity. The algorithm converges with a magnitude of 10-4, compared to 102 in BBO and 10-2 in IWO. In the slope stability problem, the safety factor acquired by the analogy of slope erosion (ASE) is closer to the recommended value.

This paper introduces a periodic selection strategy and constructs a hybrid optimizer, which enhances the global exploration capacity of metaheuristic algorithms.

This paper aims to address a distributed assembly permutation flow-shop scheduling problem (DAPFSP) considering budget constraints and factory eligibility. The first stage of the considered production system is composed of several non-identical factories with different technology levels and so the factories' performance is different in terms of processing time and cost. The second stage is an assembly stage wherein there are some parallel work stations to assemble the ready parts into the products. The objective function is to minimize the maximum completion time of products (makespan).

First, the problem is formulated as mixed-integer linear programing (MIP) model. In view of the nondeterministic polynomial (NP)-hard nature, three approximate algorithms are adopted based on variable neighborhood search (VNS) and the Johnsons' rule to solve the problem on the practical scales. The proposed algorithms are applied to solve some test instances in different sizes.

Comparison result to mathematical model validates the performance accuracy and efficiency of three proposed methods. In addition, the result demonstrated that the proposed two-level self-adaptive variable neighborhood search (TLSAVNS) algorithm outperforms the other two proposed methods. Moreover, the proposed model highlighted the effects of budget constraints and factory eligibility on the makespan. Supplementary analysis was presented by adjusting different amounts of the budget for controlling the makespan and total expected costs. The proposed solution approach can provide proper alternatives for managers to make a trade-off in different various situations.

The problem of distributed assembly permutation flow-shop scheduling is traditionally studied considering identical factories. However, processing factories as an important element in the supply chain use different technology levels in the real world. The current paper is the first study that investigates that problem under non-identical factories condition. In addition, the impact of different technology levels is investigated in terms of operational costs, quality levels and processing times.

Optimum utilization of investments has always been considered one of the most crucial aspects of capital markets. Investment into various securities is the subject of portfolio optimization intent to maximize return at minimum risk. In this series, a population-based evolutionary approach, stochastic fractal search (SFS), is derived from the natural growth phenomenon. This study aims to develop portfolio selection model using SFS approach to construct an efficient portfolio by optimizing the Sharpe ratio with risk budgeting constraints.

This paper proposes a constrained portfolio optimization model using the SFS approach with risk-budgeting constraints. SFS is an evolutionary method inspired by the natural growth process which has been modeled using the fractal theory. Experimental analysis has been conducted to determine the effectiveness of the proposed model by making comparisons with state-of-the-art from domain such as genetic algorithm, particle swarm optimization, simulated annealing and differential evolution. The real datasets of the Indian stock exchanges and datasets of global stock exchanges such as Nikkei 225, DAX 100, FTSE 100, Hang Seng31 and S&P 100 have been taken in the study.

The study confirms the better performance of the SFS model among its peers. Also, statistical analysis has been done using SPSS 20 to confirm the hypothesis developed in the experimental analysis.

In the recent past, researchers have already proposed a significant number of models to solve portfolio selection problems using the meta-heuristic approach. However, this is the first attempt to apply the SFS optimization approach to the problem.

This study aims to modify a nature-based numerical method named the invasive weed optimization (IWO) method for mobile robot path planning in various complex environments.

The existing IWO method is quick in converging to a feasible solution but in a complex environment; it takes more time as well as computational resources. So, in this paper, the computational part of this artificial intelligence technique is modified with the help of recently developed evolution algorithms like particle swarm optimization, genetic algorithm, etc. Some conditional logic statements were used while doing sensor-based mapping for exploring complex paths. Implementation of sensor-based exploration, mathematical IWO method and prioritizing them for better efficiency made this modified IWO method take complex dynamic decisions.

The proposed modified IWO is better for dynamic obstacle avoidance and navigating a long complex map. The deviation of results in simulation and experiments is less than 5.5%, which validates a good agreement between simulation and real-time testing platforms.

As per a deep literature review, it has found that the proposed approach has not been implemented on the Khepera-III robot for smooth motion planning. Here a dynamic obstacle mapping feature is implemented. A method to selectively distribute seeds instead of a random normal distribution is also implemented in this work. The modified version of IWO is coded in MATLAB and simulated through V-Rep simulation software. The integration of sensors was done through logical conditioning. The simulation results are validated using real-time experiments.

As a strand in industrialization movement in architecture, engineering and construction (AEC) industry, prefabricated construction (PC) has gained widespread popularity due to high efficiency, energy saving, low environmental impacts, safety and other advantages of PC. Well-managed supply chain can further leverage the advantages of PC. However, there is a lack of more systematically overview of the prefabricated construction supply chain (PCSC). This paper aims to comb the current status and look into the future direction of PCSC by reviewing the existing research.

In total, 131 articles related to prefabricated construction supply chain management (PCSCM) from 2000 to 2022 have been collated to (1) conduct a bibliometric analysis by using VOSviewer, including the literature sources, keywords co-occurrence, co-authorships, authorship citation and country active in the field of PCSCM; (2) classify and summarize the status of research in PCSCM through qualitative discussion and (3) point out the future research directions.

In total, 131 articles are carried out for bibliometric analysis and in-depth qualitative discussion, the visualization maps and the main research themes in the field of PCSCM are obtained. The results show that supply chain intelligentization and informatization are hot topics. Finally, future research directions that should be paid attention to in the field of PCSCM are pointed out.

This study can help project managers understand the current status and problems of PCSC operations and provide a basis for future management decisions.

Compared with previous studies, this study adds the dimension of “article authorship” to the quantitative analysis and discusses the research themes in the field of PCSCM in a comprehensive manner. In addition, this paper deeply discusses the main research topics from both the specific contents and research methods adopted.

Phonecards were largely used in African countries for telephone services. They have been collected by people around the world as a hobby. Images from several themes were printed in phonecards, including insects (beetles, butterflies, dragonflies, etc.). We hypothesized that the display of butterfly images in phonecards aimed to arise issues associated with butterfly endangerment and conservation status by protecting their natural habitat and/or butterfly beautifulness, and that they present “extinct” or “threatened” conservation status classification. The purpose of this study is to describe how butterfly images were used in African phonecards; to identify the butterfly species name through their images and information available in all African phonecards; and to record the most recent known geographical distribution and conservation status of butterflies.

Colnect database was assessed to identify all butterfly-themed African phonecards. International Union for Conservation of Nature database was also assessed to obtain information on the most recent known geographical distribution and conservation status of butterflies.

The species name of butterflies was identified from 6 out of 18 African phonecards. The most recent known geographical distribution of butterflies was wide across Africa and conservation status of most genera is classified as “least concern”.

The display of butterfly images in African phonecards is mostly associated with their beautifulness and least related with butterfly conservation, protection and endangerment status.

The purpose of this study is to establish whether all the dimensions of entrepreneurship skills matter for sustainable business start-up among the youths, using evidence from a developing economy.

This was cross-sectional study which utilized a quantitative approach. Data were collected using a self-administered questionnaire from 254 youths who undertook skills training at the various government-supported business skills training centers in the Greater Kampala Metropolitan Area (GKMA), that is to say, Kampala, Mukono and Wakiso. Data collected were analyzed using the Statistical Package for the Social Sciences (SPSS) to derive descriptive, correlational and hierarchical regression.

Study findings indicate that unlike entrepreneurial skills, management, technical and personal maturity skills matter for the sustainability of business start-up of youths in Uganda. However, when all skills are compared, management skills matter most as compared to technical and personal maturity skills.

This study strengthens the existing literature on the sustainable business start-up of youths in Uganda. It is also relevant for policy decision-making and policy reversal because it demonstrates that skilling is pertinent and should be encouraged and rolled out across the country to encourage sustainable youth business start-ups. To increase sustainable business start-up among youths, management skills should be prioritized, together with technical and personal maturity skills, compared to entrepreneurial skills, which should only be emphasized at the idea generation, planning, resource mobilization and business implementation stages.

In this research paper, the authors delve into the ethnography and socioeconomic status of the Chenchu tribal community that resides in Telangana's Nallamalla forest. The authors also examine the initiatives undertaken by the government to create fair entrepreneurial opportunities while preserving their unique culture. Additionally, the authors analyse potential entrepreneurial and business opportunities using the environmental, social and governance (ESG) framework.

To gain insight into the current socio-economic development and living standards of the Chenchu tribal people, the authors conducted interviews in nine different villages with 177 individual respondents. Statistical analysis was then used to determine the relationship between business opportunities and their impact on socio-economic development based on the data collected.

The Chenchu tribal community has faced significant challenges, including vulnerability, poverty and debt. To promote the development of the tribe, it is essential to provide equal opportunities in education, healthcare and means of subsistence. The government has implemented various social and developmental programs to support sustainable development and entrepreneurial opportunities while preserving the tribe's unique culture and improving their education and standard of living. These initiatives are aimed at benefiting the entire community.

The Chenchu tribal people are eager for progress but hesitant to leave their forest homes and integrate into modern society. This creates challenges for efficiently implementing welfare programs. It is crucial to strike a balance between forest regulations and the rights of indigenous communities to ensure their protection and prevent any hindrance to development efforts.

To promote sustainable development and preserve tribal cultures, the government should implement various social and developmental programs. These programs should improve living conditions and socioeconomic development while exploring business opportunities. Maintaining these communities' unique identities while striving for progress is essential.

Cloud computing (CC) refers to the usage of virtualization technology to share computing resources through the internet. Task scheduling (TS) is used to assign computational resources to requests that have a high volume of pending processing. CC relies on load balancing to ensure that resources like servers and virtual machines (VMs) running on real servers share the same amount of load. VMs are an important part of virtualization, where physical servers are transformed into VM and act as physical servers during the process. It is possible that a user’s request or data transmission in a cloud data centre may be the reason for the VM to be under or overloaded with data.

VMs are an important part of virtualization, where physical servers are transformed into VM and act as physical servers during the process. It is possible that a user’s request or data transmission in a cloud data centre may be the reason for the VM to be under or overloaded with data. With a large number of VM or jobs, this method has a long makespan and is very difficult. A new idea to cloud loads without decreasing implementation time or resource consumption is therefore encouraged. Equilibrium optimization is used to cluster the VM into underloaded and overloaded VMs initially in this research. Underloading VMs is used to improve load balance and resource utilization in the second stage. The hybrid algorithm of BAT and the artificial bee colony (ABC) helps with TS using a multi-objective-based system. The VM manager performs VM migration decisions to provide load balance among physical machines (PMs). When a PM is overburdened and another PM is underburdened, the decision to migrate VMs is made based on the appropriate conditions. Balanced load and reduced energy usage in PMs are achieved in the former case. Manta ray foraging (MRF) is used to migrate VMs, and its decisions are based on a variety of factors.

The proposed approach provides the best possible scheduling for both VMs and PMs. To complete the task, improved whale optimization algorithm for Cloud TS has 42 s of completion time, enhanced multi-verse optimizer has 48 s, hybrid electro search with a genetic algorithm has 50 s, adaptive benefit factor-based symbiotic organisms search has 38 s and, finally, the proposed model has 30 s, which shows better performance of the proposed model.

User’s request or data transmission in a cloud data centre may cause the VMs to be under or overloaded with data. To identify the load on VM, initially EQ algorithm is used for clustering process. To figure out how well the proposed method works when the system is very busy by implementing hybrid algorithm called BAT–ABC. After the TS process, VM migration is occurred at the final stage, where optimal VM is identified by using MRF algorithm. The experimental analysis is carried out by using various metrics such as execution time, transmission time, makespan for various iterations, resource utilization and load fairness. With its system load, the metric gives load fairness. How load fairness is worked out depends on how long each task takes to do. It has been added that a cloud system may be able to achieve more load fairness if tasks take less time to finish.