Search results

Automatic dependent surveillance-broadcast (ADS-B) is the foundational technology of the next generation air transportation system defined by Federal Aviation Authority and is one of the most precise ways for tracking aircraft position. ADS-B is intended to provide greater situational awareness to the pilots by displaying the traffic information like aircraft ID, altitude, speed and other critical parameters on the Cockpit Display of Traffic Information displays in the cockpit. Unfortunately, due to the initial proposed nature of ADS-B protocol, it is neither encrypted nor has any other innate security mechanisms, which makes it an easy target for malicious attacks. The system is vulnerable to various active and passive attacks like message ingestion, message deletion, eavesdropping, jamming, etc., which has become an area of concern for the aviation industry. The purpose of this study is to propose a method based on modified advanced encryption standard (AES) algorithm to secure the ADS=B messages and increase the integrity of ADS-B data transmissions.

Though there are various cryptographic and non-cryptographic methods proposed to secure ADS-B data transmissions, it is evident that most of these systems have limitations in terms of cost, implementation or feasibility. The new proposed method implements AES encryption techniques on the ADS-B data on the sender side and correlated decryption mechanism at the receiver end. The system is designed based on the flight schedule data available from any flight planning systems and implementing the AES algorithm on the ADS-B data from each aircraft in the flight schedule.

The suitable hardware was developed using Raspberry pi, ESP32 and Ra-02. Several runs were done to verify the original message, transmitted data and received data. During transmission, encryption algorithm was being developed, which has got very high secured transmission, and during the reception, the data was secured. Field test was conducted to validate the transmission and quality. Several trials were done to validate the transmission process. The authors have successfully shown that the ADS-B data can be encrypted using AES algorithm. The authors are successful in transmitting and receiving the ADS-B data packet using the discussed hardware and software methodology. One major advantage of using the proposed solution is that the information received is encrypted, and the receiver ADS-B system can decrypt the messages on the receiving end. This clearly proves that when the data is received by an unknown receiver, the messages cannot be decrypted, as the receiver is not capable of decrypting the AES-authenticated messages transmitted by the authenticated source. Also, AES encryption is highly unlikely to be decrypted if the encryption key and the associated decryption key are not known.

Implementation of the developed solution in actual onboard avionics systems is not within the scope of this research. Hence, assessing in the real-time distances is not covered.

The authors propose to extend this as a software solution to the onboard avionics systems by considering the required architectural changes. This solution can also bring in positive results for unmanned air vehicles in addition to the commercial aircrafts. Enhancement of security to the key operational and navigation data elements is going to be invaluable for future air traffic management and saving lives of people.

The proposed solution has been practically implemented by developing the hardware and software as part of this research. This has been clearly brought out in the paper. The implementation has been tested using the actual ADS-B data/messages received from using the ADS-B receiver. The solution works perfectly, and this brings immense value to the aircraft-to-aircraft and aircraft-to-ground communications, specifically while using ADS-B data for communicating the position information. With the proposed architecture and minor software updates to the onboard avionics, this solution can enhance safety of flights.

This study presents a systematic literature review (SLR) of the interdisciplinary literature on drones in last-mile delivery (LMD) to extrapolate pertinent insights from and into the logistics management field.

Rooting their analytical categories in the LMD literature, the authors performed a deductive, theory refinement SLR on 307 interdisciplinary journal articles published during 2015–2022 to integrate this emergent phenomenon into the field.

The authors derived the potentials, challenges and solutions of drone deliveries in relation to 12 LMD criteria dispersed across four stakeholder groups: senders, receivers, regulators and societies. Relationships between these criteria were also identified.

This review contributes to logistics management by offering a current, nuanced and multifaceted discussion of drones' potential to improve the LMD process together with the challenges and solutions involved.

The authors provide logistics managers with a holistic roadmap to help them make informed decisions about adopting drones in their delivery systems. Regulators and society members also gain insights into the prospects, requirements and repercussions of drone deliveries.

This is one of the first SLRs on drone applications in LMD from a logistics management perspective.

This study aims to identify the main challenges to achieving humanitarian logistics in the context of United Nations peace missions in sub-Saharan Africa and to present suggestions for overcoming the logistical gaps encountered.

The methodological approach of the work focuses on the comparative case study of the United Nations Mission in South Sudan, the United Nations Multidimensional Integrated Stabilisation Mission in the Central African Republic and The United Nations Organisation Stabilisation Mission in the Democratic Republic of Congo from 2014 to 2021. The approach combined a systematic literature review with the authors’ empirical experience as participant observers in each mission, combining theory and practice.

As a result, six common challenges were identified for carrying out humanitarian logistics in the three peace missions. Each challenge revealed a logistical gap for which an appropriate solution was suggested based on the best practices found in the case study of each mission.

This paper presents limitations when addressing the logistical analysis based on only three countries under the UN mission as a case study, as well as conceiving that certain flaws in the system, in the observed period, are already in the process of correction with the adoption of the 2016–2021 strategy by the UN Global Logistic Cluster. The authors suggest that further studies can be carried out by expanding the number of cases or using countries where other bodies (AU, NATO or EU) work.

To the best of the authors’ knowledge, this study is the first comparative case study of humanitarian logistics on the three principal missions of the UN conducted by academics and practitioners.

The purpose of this paper is to present a wall-climbing robot platform for heavy-load with negative pressure adsorption, which could be equipped with a six-degree of freedom (DOF) collaborative robot (Cobot) and detection device for inspecting the overwater part of concrete bridge towers/piers for large bridges.

By analyzing the shortcomings of existing wall-climbing robots in detecting concrete structures, a wall-climbing mobile manipulator (WCMM), which could be compatible with various detection devices, is proposed for detecting the concrete towers/piers of the Hong Kong-Zhuhai-Macao Bridge. The factors affecting the load capacity are obtained by analyzing the antislip and antioverturning conditions of the wall-climbing robot platform on the wall surface. Design strategies for each part of the structure of the wall-climbing robot are provided based on the influencing factors. By deriving the equivalent adsorption force equation, analyzed the influencing factors of equivalent adsorption force and provided schemes that could enhance the load capacity of the wall-climbing robot.

The adsorption test verifies the maximum negative pressure that the fan module could provide to the adsorption chamber. The load capacity test verifies it is feasible to achieve the expected bearing requirements of the wall-climbing robot. The motion tests prove that the developed climbing robot vehicle could move freely on the surface of the concrete structure after being equipped with a six-DOF Cobot.

The development of the heavy-load wall-climbing robot enables the Cobot to be installed and equipped on the wall-climbing robot, forming the WCMM, making them compatible with carrying various devices and expanding the application of the wall-climbing robot.

A heavy-load wall-climbing robot using negative pressure adsorption has been developed. The wall-climbing robot platform could carry a six-DOF Cobot, making it compatible with various detection devices for the inspection of concrete structures of large bridges. The WCMM could be expanded to detect the concretes with similar structures. The research and development process of the heavy-load wall-climbing robot could inspire the design of other negative-pressure wall-climbing robots.

This study aims to chart the impact of technological advancements on tourism from the post–Second World War era to the present and forecast their influence until 2050. It assesses how technologies have reshaped travel experiences and operations, with a focus on upcoming innovations such as the metaverse, Web 3.0 and AI, and their implications for sustainable and ethical tourism.

This study uses a hybrid approach, combining historical analysis and future projections. It analyzes archival data, industry reports and academic literature.

This study identifies crucial technological milestones that have significantly impacted tourism, including the rise of commercial aviation, the internet and AI. Future trends suggest emerging technologies will further transform the sector. Challenges in sustainability, ethics and inclusivity are highlighted as critical considerations for future development.

This paper offers a unique longitudinal perspective on technology’s influence on tourism, bridging past trends with future projections.

本研究采取混合方法, 融合历史分析与未来趋势预测。研究分析了丰富的档案数据、行业报告以及学术文献。

旨在勾勒从二战后至今技术进步对旅游业的影响, 并展望至2050年的潜在影响。本研究着重评估技术如何重塑旅游体验和运作, 特别是对元宇宙、网络3.0和人工智能等即将到来的创新技术及其对可持续和伦理旅游的意义。

识别了旅游业中关键的技术里程碑, 包括商业航空、互联网和人工智能的崛起。研究指出, 未来趋势显示新兴技术将继续深刻改变旅游业。同时强调, 可持续性、伦理和包容性是未来发展中不可忽视的关键要素。

本文从独特的纵向视角出发, 深入探讨了技术对旅游业的历史与未来影响, 将过去发展趋势与未来展望紧密结合。

Este estudio emplea un enfoque híbrido que combina el análisis histórico y las proyecciones de futuro. Analiza datos de archivo, informes del sector y bibliografía académica.

La investigación pretende trazar el impacto de los avances tecnológicos en el turismo desde la era posterior a la Segunda Guerra Mundial hasta la actualidad y prever su influencia hasta 2050. Evalúa cómo las tecnologías han reconfigurado las experiencias y las operaciones de viaje, centrándose en las próximas innovaciones como el Metaverso, la Web 3.0 y la IA, y sus implicaciones para un turismo sostenible y ético.

El estudio identifica hitos tecnológicos cruciales que han tenido un impacto significativo en el turismo, como el auge de la aviación comercial, Internet y la IA. Las tendencias futuras sugieren que las tecnologías emergentes transformarán aún más el sector. Los retos en sostenibilidad, ética e inclusividad se destacan como consideraciones críticas para el desarrollo futuro.

Este artículo ofrece una perspectiva longitudinal única sobre la influencia de la tecnología en el turismo, tendiendo un puente entre las tendencias pasadas y las proyecciones futuras.

Climate change is a problem that concerns all of us. Despite the information produced by organizations such as the Expert Team on Climate Change Detection and Indices and the United Nations, only a few cities have been planned taking into account the climate changes indices. This paper aims to study climatic variations, how climate conditions might change in the future and how these changes will affect the activities and living conditions in cities, specifically focusing on Mexico city.

In this approach, two distinct machine learning regression models, k-Nearest Neighbors and Support Vector Regression, were used to predict variations in climate change indices within select urban areas of Mexico city. The calculated indices are based on maximum, minimum and average temperature data collected from the National Water Commission in Mexico and the Scientific Research Center of Ensenada. The methodology involves pre-processing temperature data to create a training data set for regression algorithms. It then computes predictions for each temperature parameter and ultimately assesses the performance of these algorithms based on precision metrics scores.

This paper combines a geospatial perspective with computational tools and machine learning algorithms. Among the two regression algorithms used, it was observed that k-Nearest Neighbors produced superior results, achieving an R² score of 0.99, in contrast to Support Vector Regression, which yielded an R² score of 0.74.

The full potential of machine learning algorithms has not been fully harnessed for predicting climate indices. This paper also identifies the strengths and weaknesses of each algorithm and how the generated estimations can then be considered in the decision-making process.

The aim of this paper is to provide a narrative review of previous research on tourism demand modelling and forecasting and potential future developments.

A narrative approach is taken in this review of the current body of knowledge.

Significant methodological advancements in tourism demand modelling and forecasting over the past two decades are identified.

The distinct characteristics of the various methods applied in the field are summarised and a research agenda for future investigations is proposed.

本文旨在对先前关于旅游需求建模和预测的研究进行叙述性回顾并对未来潜在发展进行展望。

本文采用叙述性回顾方法对当前知识体系进行了评论。

本文确认了过去二十年旅游需求建模和预测方法论方面的重要进展。

本文总结了该领域应用的各种方法的独特特征, 并对未来研究提出了建议。

El objetivo de este documento es ofrecer una revisión narrativa de la investigación previa sobre modelización y previsión de la demanda turística y los posibles desarrollos futuros.

En esta revisión del marco actual de conocimientos sobre modelización y previsión de la demanda turística y los posibles desarrollos futuros,se adopta un enfoque narrativo.

Se identifican avances metodológicos significativos en la modelización y previsión de la demanda turística en las dos últimas décadas.

Se resumen las características propias de los diversos métodos aplicados en este campo y se propone una agenda de investigación para futuros trabajos.