Search results
1 – 10 of over 1000The purpose of this paper is to investigate aerosol evolution in a planar mixing layer from a Lagrangian point of view. After using Monte Carlo (MC) method to simulate the…
Abstract
Purpose
The purpose of this paper is to investigate aerosol evolution in a planar mixing layer from a Lagrangian point of view. After using Monte Carlo (MC) method to simulate the evolution of aerosol dynamics along particles trajectories, the particles size distributions are obtained, which are unavailable in mostly used methods of moments.
Design/methodology/approach
Nucleation and growth of dibutyl phthalate (DBP) particles are simulated using the quadrature method of moments in a planar mixing layer, where a fast hot stream with DBP vapor is mixing with a slow cool stream without vapor. Trajectories of aerosol particles are recorded. MC method is used to simulate the aerosol evolution along trajectories.
Findings
Investigation on aerosol evolution along the trajectories prompts to classify these trajectories into three groups: first, trajectories away from the active nucleation zone; second, trajectories starting from the active nucleation zone; and third, trajectories crossing over the active nucleation zone. Particle size distributions (psds) along selected representative trajectories are investigated. The psd evolution exhibits interesting behavior due to the synthetic effects of nucleation and condensation. Condensation growth tends to narrow down the psd, and form a sharp front on the side of big particle size. Nucleation is able to broaden the psd through generating the smallest particles. The duration and strength of nucleation have significant effect on the shape of psd.
Originality/value
As far as the authors knowledge, it is the first simulation of aerosol evolution that takes a Lagrangian point of view, and uses MC simulation along particles trajectories to provide the particles size distribution.
Details
Keywords
Aerosols play an important role in the radiative balance of the atmosphere. While sulphate aerosols are recognized as the dominant contributor of tropospheric aerosols over and…
Abstract
Aerosols play an important role in the radiative balance of the atmosphere. While sulphate aerosols are recognized as the dominant contributor of tropospheric aerosols over and near industrialized regions, smoke aerosols containing soot or elemental carbon are regarded with increasing importance on a global basis. The fate of carbonaceous aerosols is at present poorly understood as a result of various atmospheric processes. This paper examines the effect of morphology on the physical and chemical properties of atmospheric aerosols, in the context of fractal theory. The use of a fractal dimension to describe aggregate morphology enables more accurate modelling of sedimentation and optical characteristics.
Details
Keywords
Gregory R. Carmichael, Adrian Sandu, Chul H. Song, Shan He, Mahesh J. Phadnis, Dacian Daescu, Valeriu Damian‐Iordache and Florian A. Potra
Discusses computational challenges in air quality modelling (as viewed by the authors). The focus of the paper will be on Di, the “current” state‐of‐affairs. Owing to limitation…
Abstract
Discusses computational challenges in air quality modelling (as viewed by the authors). The focus of the paper will be on Di, the “current” state‐of‐affairs. Owing to limitation of space the discussion will focus on only a few aspects of air quality modelling: i.e. chemical integration, sensitivity analysis and computational framework, with particular emphasis on aerosol issues.
Details
Keywords
The purpose of this paper is to study the complex aerosol dynamic processes by using this newly developed stochastically weighted operator splitting Monte Carlo (SWOSMC) method.
Abstract
Purpose
The purpose of this paper is to study the complex aerosol dynamic processes by using this newly developed stochastically weighted operator splitting Monte Carlo (SWOSMC) method.
Design/methodology/approach
Stochastically weighted particle method and operator splitting method are coupled to formulate the SWOSMC method for the numerical simulation of particle-fluid systems undergoing the complex simultaneous processes.
Findings
This SWOSMC method is first validated by comparing its numerical simulation results of constant rate coagulation and linear rate condensation with the corresponding analytical solutions. Coagulation and nucleation cases are further studied whose results are compared with the sectional method in excellent agreement. This SWOSMC method has also demonstrated its high numerical simulation capability when used to deal with simultaneous aerosol dynamic processes including coagulation, nucleation and condensation.
Originality/value
There always exists conflict and tradeoffs between computational cost and accuracy for Monte Carlo-based methods for the numerical simulation of aerosol dynamics. The operator splitting method has been widely used in solving complex partial differential equations, while the stochastic-weighted particle method has been commonly used in numerical simulation of aerosol dynamics. However, the integration of these two methods has not been well investigated.
Details
Keywords
Hongmei Liu and Tat Leung Chan
The purpose of this paper is to study the evolution and growth of aerosol particles in a turbulent planar jet by using the newly developed large eddy simulation…
Abstract
Purpose
The purpose of this paper is to study the evolution and growth of aerosol particles in a turbulent planar jet by using the newly developed large eddy simulation (LES)-differentially weighted operator splitting Monte Carlo (DWOSMC) method.
Design/methodology/approach
The DWOSMC method is coupled with LES for the numerical simulation of aerosol dynamics in turbulent flows.
Findings
Firstly, the newly developed and coupled LES-DWOSMC method is verified by the results obtained from a direct numerical simulation-sectional method (DNS-SM) for coagulation occurring in a turbulent planar jet from available literature. Then, the effects of jet temperature and Reynolds number on the evolution of time-averaged mean particle diameter, normalized particle number concentration and particle size distributions (PSDs) are studied numerically on both coagulation and condensation processes. The jet temperature and Reynolds number are shown to be two important parameters that can be used to control the evolution and pattern of PSD in an aerosol reactor.
Originality/value
The coupling between the Monte Carlo method and turbulent flow still encounters many technical difficulties. In addition, the relationship between turbulence, particle properties and collision kernels of aerosol dynamics is not yet well understood due to the theoretical limitations and experimental difficulties. In the present study, the developed and coupled LES-DWOSMC method is capable of solving the aerosol dynamics in turbulent flows.
Details
Keywords
Fangjie Yu, Yunfei Liu, Longqing Fan, Linhua Li, Yong Han and Ge Chen
In this paper, a light-weight, low-power atmospheric multi-parameter sensor (AMPS), which could be mounted on small flying platforms such as a tethered balloon, a quad-rotor…
Abstract
Purpose
In this paper, a light-weight, low-power atmospheric multi-parameter sensor (AMPS), which could be mounted on small flying platforms such as a tethered balloon, a quad-rotor unmanned aerial vehicle (UAV), a UAV helicopter, etc., is implemented and integrated to sample vertical distribution of aerosols with integrated parameters of aerosol particle concentration, temperature, relative humidity and atmospheric pressure.
Design/methodology/approach
The AMPS integrates three kinds of probes in an embedded system. A synchronous method based on GPS is proposed to drive the laser aerosol particle sensor, the temperature and humidity probe and the pressure probe to sample four channels approximately simultaneously. Different kinds of housing are designed to accommodate various flying platforms, and the weight is controlled to adapt the payload of each platform.
Findings
A series of validation tests show that while the AMPS achieves high precision, its power consumption is less than 1.3 W, which is essential for light flying platforms. The AMPS was mounted on different flying platforms and the difference was evaluated. For three times every five days, vertical profiles of PM2.5 and PM10 concentrations were observed by the AMPS mounted on a quad-rotor UAV, which revealed the significant correlation between the aerosol particle concentration and atmospheric parameters.
Originality/value
A new light-weight and low-power AMPS for small flying platforms is designed and tested, which provides an effective way to explore the properties of aerosol vertical distribution, and to monitor pollutants flexibly.
Details
Keywords
Ingmar J. Ackermann, Heinz Hass, Benedikt Schell and Francis S. Binkowski
Describes the development and application of an aerosol model for regional air quality simulations. The aerosol model MADE is based on a modal concept and describes the chemical…
Abstract
Describes the development and application of an aerosol model for regional air quality simulations. The aerosol model MADE is based on a modal concept and describes the chemical composition and the size distribution of atmospheric particulate matter. Primary as well as secondary aerosol components are considered in the model, which is fully integrated into the photochemical transport model EURAD. The model system has been applied to a European domain with different resolutions, using a one‐way nesting procedure. Simulations show the potential importance of secondary organics of anthropogenic and biogenic origin for the tropospheric particle loading. In addition it is shown that a reduction in precursor emissions for the inorganic ion fraction of PM (sulphate, nitrate and ammonium) does not necessarily lead to an equivalent reduction in PM2.5 mass concentrations, as for example a reduction in sulphate aerosol caused by reduced SO2 emissions might be compensated by enhanced formation of nitrate aerosols in certain regions.
Details
Keywords
Zhihua Zhang, Andy Jones and M. James C. Crabbe
Currently, negotiation on global carbon emissions reduction is very difficult owing to lack of international willingness. In response, geoengineering (climate engineering…
Abstract
Purpose
Currently, negotiation on global carbon emissions reduction is very difficult owing to lack of international willingness. In response, geoengineering (climate engineering) strategies are proposed to artificially cool the planet. Meanwhile, as the harbor around one-third of all described marine species, coral reefs are the most sensitive ecosystem on the planet to climate change. However, until now, there is no quantitative assessment on the impacts of geoengineering on coral reefs. This study aims to model the impacts of stratospheric aerosol geoengineering on coral reefs.
Design/methodology/approach
The HadGEM2-ES climate model is used to model and evaluate the impacts of stratospheric aerosol geoengineering on coral reefs.
Findings
This study shows that (1) stratospheric aerosol geoengineering could significantly mitigate future coral bleaching throughout the Caribbean Sea; (2) Changes in downward solar irradiation, sea level rise and sea surface temperature caused by geoengineering implementation should have very little impacts on coral reefs; (3) Although geoengineering would prolong the return period of future hurricanes, this may still be too short to ensure coral recruitment and survival after hurricane damage.
Originality/value
This is the first time internationally to quantitatively assess the impacts of geoengineering on coral reefs.
Details
Keywords
Young Kag Kim and Sang Soo Kim
We present the equations for condensation in cooled upward laminar flowin tubes and consider their solution for low vapour concentrations andvariable vapour‐gas thermodynamic…
Abstract
We present the equations for condensation in cooled upward laminar flow in tubes and consider their solution for low vapour concentrations and variable vapour‐gas thermodynamic properties. We treated the full problem, including coupling with the aerosol size distribution, by using the PSI‐CELL (Particle Source in Cell) method. The particle trajectories start from the point where the particles are generated homogeneous nucleation. Particle size distribution and vapour scavenging by particles are obtained in forced convection and mixed convection regions. Calculations were also conducted with respect to tube diameters.
Details
Keywords
Renee Fleming, Katherine Maslak Madson and Bradley Perkins
The purpose of this study was to examine how data from the World Health Organization, United States Environmental Protection Agency and Center for Disease Control have evolved…
Abstract
Purpose
The purpose of this study was to examine how data from the World Health Organization, United States Environmental Protection Agency and Center for Disease Control have evolved with relation to engineering controls for heating, ventilation and air-conditioning (HVAC) systems to mitigate the spread of spread of aerosols (specifically related to the COVID-19 pandemic) in occupied buildings.
Design/methodology/approach
A document analysis of the pandemic-focused position documents from the aforementioned public health agencies and national HVAC authorities was performed. This review targeted a range of evidence from recommendations, best practices, codes and regulations and peer-reviewed publications and evaluated how they cumulatively evolved over time. Data was compared between 2020 and 2021.
Findings
This research found that core information provided early in the pandemic (i.e. early 2020) for engineering controls in building HVAC systems did not vary greatly as knowledge of the pandemic evolved (i.e. in June of 2021). This indicates that regulating agencies had a good, early understanding of how airborne viruses spread through building ventilation systems. The largest evolution in knowledge came from the broader acceptance of building ventilation as a transmission route and the increase in publications and ease of access to the information for the general public over time.
Originality/value
The promotion of the proposed controls for ventilation in buildings, as outlined in this paper, is another step toward reducing the spread of COVID-19 and future aerosol spread viruses by means of ventilation.
Details