Search results

When implemented effectively and systematically across a curriculum, high impact practices (HIP) have the potential to increase student engagement and result in higher student achievement. The United States Air Force Academy (USAFA) is a four-year military university with a large liberal education core curriculum that provides the foundation for service and officership in the United States Air or Space Forces. Building on the liberal education core, the civil engineering (CE) major’s courses begin with the cornerstone field engineering course, paired with a two-week co-curricular experience for students at an Air or Space Force installation. With its motto “construct first, design later,” the field engineering course is an HIP and quintessential experiential learning course that gives students a practical frame-of-reference for future analysis and design courses. The CE major culminates with another HIP, the capstone design course, which gives students the opportunity to demonstrate their skills, building confidence in their ability to successfully apply those skills to the increasingly complex problems they will face after graduation. This book chapter provides a case study of the CE major at the USAFA, documenting the HIPs across the majors’ program, and highlighting the key elements and benefits of each.

This study aims to investigate students’ satisfaction, self-efficacy and perceived competencies in a ‘technical writing and communication skills’ course after the switch of teaching the course from face to face to fully online during and after COVID-19. The study also measured the Achievement of Accreditation Board for Engineering and Technology course learning outcomes (CLOs).

A descriptive cross-sectional survey design approach was adopted in this study. Students were asked to respond to an online survey after completion of the course to measure the target parameters. The data of 250 respondents, analyzed with IBM SPSS Statistics 28, show high scores on all constructs.

Statistically significant differences among gender, field of study, grade point average (GPA) level, type of school attended and attainment of English proficiency certificate were detected for students in terms of their baseline perceived competencies, achievement of CLOs and self-efficacy scores. In addition, gender, field of study, GPA and holding an international English proficiency certificate had statistically significant effect, whereas the academic level and type of school were insignificant.

First, the data had been collected through survey only. A limitation of this method is that there could be survey fraud. Second, as some respondents found the survey long, their responses might have been less reliable. Moreover, as the survey was entirely conducted online, this may have caused limited sampling, because some respondents are less likely to have internet access/disconnection and respond to online surveys. Furthermore, this research had focused on studying the impact of an online course on university students’ achievement in a Jordanian university, this limits the generalizability of the result to students of other levels and classes, or ones studying in other universities or living in different countries.

Because of its impact on effective teaching and achievement, educators need to pay much attention to self-efficacy when designing new curricula for different environmental contexts. Furthermore, it is apparent that some courses, such as “technical writing” can be taught fully online without affecting students’ performance and achievement. Because educators always look for ways that make teaching effective, they may need to consider online platforms for teaching specific courses, hence save time, effort and resources.

A course on technical writing and communication skills offered to undergraduate engineering and information technology students at Princess Sumaya University for Technology was switched from face to face to fully online modality during the COVID-19 pandemic in the period 2020–2021. The effect of such massive and sudden transformation on students’ achievement and satisfaction called for immediate scrutiny of the prospect and expectancy of online learning.

Some degree programs in colleges and universities utilize entrance exams to ensure that students pursuing a given degree have mastered foundational concepts needed for that program. However, often these exams become a barrier to student success. The purpose of this study is to discuss the impact of policies governing an undergraduate Computer Science (CS) entry/qualifying exam at a large public university in the United States on overall student success in the program. This case study focuses on whether reforming program policies impacts students' time-to-degree, graduation and mastery in CS core skills.

This case study describes how the CS student success was improved by updating program policies based on institutional data and the input of course instructors. The policy changes include introducing a maximum limit to attempt the exam, changing the exam requirements as well as the structure of the exam itself.

The pass rates of students taking this qualifying exam were significantly and consistently low over the years. Students who were potentially a better fit for programs other than CS delayed their start in those other programs by taking and failing to pass the CS qualifying exam multiple times. As a result of implementing new CS program policies, many more students attempted the exam at an appropriate time. Also, they graduated on time in the years 2016–2018.

This paper presents a case study in which the graduation rates and time to degree of a CS program with a qualifying exam were improved after a policy intervention. The results demonstrate that simple policy changes can improve student success. Findings from this study may guide other programs with similar characteristics to improve their student success.

This study aims to present a conceptual framework aimed at promoting educational innovation in supply chain management and logistics (SCM&L). The framework can help to design active learning experiences regarding student learning outcomes that tackle current challenges in the discipline. Emphasizing the significance of linking students’ learning to real-world scenarios, the framework enables reflective learning through hands-on engagement in a constructive alignment, overcoming existing pedagogical limitations in the field.

This study presents a qualitative research methodology that relies on the case study method. Three instances are presented to illustrate educational efforts of active learning in countries of Latin America, Bolivia, Mexico and Peru, linking real-world relevant situations to disciplinary teaching and learning.

The innovative learning experiences introduced in this study transform real-world SCM&L operations into distinctive educational opportunities. These experiences facilitate learning not only within traditional classrooms but also in urban areas of the Latin American region, enabling students to interact with educational partners in authentic settings to achieve their intended learning outcomes. These experiences are characterized by their focus on establishing meaningful connections between learning and local communities, businesses or specific contexts.

The study recognizes various limitations of conceptual, methodological, execution-related and research process aspects. First, not all academics in the SCM&L discipline may universally acknowledge the importance of educational innovation and active learning experiences because of limited pedagogical awareness. Moreover, execution-related limitations arise from the demanding nature of incorporating active pedagogical approaches into courses, as they can be resource-intensive and time-consuming. Regarding research process limitations, the case study limits generalizability and broader inferences because of its particular views and locations, which require further investigation with other instances across other disciplines and geographical regions for validation.

The practical implementation of this framework within the MIT SCALE network for Latin America and the Caribbean (LAC) demonstrates its potential in meeting diverse academic and institutional expectations and providing educational benefits to students.

The study makes a valuable contribution to prioritizing and coordinating pedagogical research by investigating the success of learning outcomes achieved through active and experiential implementations in various contexts. It provides inspiring examples of innovative learning experiences that can drive new developments not only within the LAC region but also in other areas, prompting a shift away from traditional educational approaches.

This research presents a conceptual framework, which is developed from the insights obtained in the three learning experiences to guide future efforts in SCM&L education. The findings demonstrate how to structure active learning experiences based on authentic assessment and illustrate the potential for increased cooperation among institutions in Latin America. It also promotes the recognition of novel SCM&L active learning experiences and highlights some of the benefits of this approach.

Industry and academia around the world stress the importance of professional skills (also known as soft skills, generic skills, or transferable skills) so it is necessary to be able to assess students’ attainment of these skills. An innovative method was developed in the USA for assessment of these skills in an engineering program (Ater Kranov, Hauser, Olsen, & Girardeau, 2008); this method was based around student discussion of an open-ended, unresolved, discipline-related problem, held face-to-face and subsequently analyzed using a rubric. In the research project described here, the method was adapted for the United Arab Emirates by writing appropriate scenarios for computing students, by modifying the rubric and by running the discussion on an online discussion board. The primary aims were to determine the feasibility of adapting the method and to examine its suitability. The results of the study showed that the method can be adapted and employed very successfully with UAE students. This paper presents the method, its adaptation and implementation, and the results obtained.

The purpose of this paper is to identify the best practices of industrial engineering (IE) programs that could be learnt and used at other educational institutions.

Nine IE programs in the USA are benchmarked using a conceptual framework that considers an educational program as a system consisting of a purpose, a curriculum, resources, and quality processes. The information used in benchmarking is collected from the program self-study reports, course catalogs, and websites which are available on the internet.

It is found that in spite of their diversity in history, missions, sizes, and reputations, the studied programs are rather unified in terms of purpose definition, curriculum formation, resource selection, and quality process usage. From the analysis, a template of IE curriculum is proposed.

As the selection of the studied programs is based on the availability of the information, the findings may not be representative for IE programs in the USA. Future work can aim at comparing IE programs from various countries.

The findings could be used as benchmarks by IE schools interested in the improvement of operations.

A conceptual framework for benchmarking is proposed and proves useful for comparing educational programs. The findings represent the current best practices at IE schools in the USA.

This paper investigates the integration of leadership training into IT curricula to develop current and future skills needed by the IT job market. The technical and non-technical skills required for IT professionals are presented and a conceptual model for including leadership training in technical courses is outlined. To implement this model, we adopted the Problem-Based Learning approach to teach an IT course. Qualitative and quantitative data were gathered, through a survey, from 52 undergraduate students in the College of Information Technology at Zayed University. Our results show that our adopted approach was successful in teaching IT skills as well as developing leadership skills. Given these findings, we highlight the importance and feasibility of integrating leadership development on a daily basis within technical courses to develop both the technical and non technical skills required by the job market.

The purpose of this paper is to illustrate the application of business process reengineering (BPR) and benchmarking principles to redesign an undergraduate course on BPR to achieve continuous improvements. The principles are applied on a course on BPR in the curriculum of engineering management (EM) program at Stevens Institute of Technology. The EM program aims to provide the students the knowledge and skills, which are necessary to work effectively at the interface between technology, management, and engineering. BPR course (EM435) is recently added to EM program's curriculum to support the need for providing the bridge between the engineering of systems and business operations.

The research approach design is laid out from the time the EM435 course is first offered in the fall of 2006 to the senior year EM students. The students are surveyed and areas of redesign and improvements are identified based on benchmarking against ABET criteria and their associated outcomes, student expectations, similar academic courses, and industry expectations of skills and knowledge.

The identification of the improvement areas in the BPR curriculum leads to a continuous process improvement (CPI) initiative, which has been continued in a more structured manner. Research findings indicate a strong support for more case studies, use of BPR tool, and real‐life project in their investigation of effective pedagogy for teaching BPR to engineering undergraduates.

This paper demonstrates the value of applying benchmarking and CPI methodology in maintaining effective teaching and learning of BPR concepts. More empirical metrics can be developed in future to measure the success of course, improvements.

The findings of this research will promote adoption of courses on BPR and lay a foundation for BPR curriculum in engineering. The CPI approach will provide opportunities to analyze improvements over a period of time.

This paper is unique in its application of benchmarking and CPI for improving BPR curriculum at an undergraduate engineering level.

Saudi universities have incorporated capstone projects in the final year of an undergraduate study. Although universities are following recommendations of the National Commission for National Commission for Academic Accreditation and Assessment (NCAAA) and Accreditation Board for Engineering and Technology (ABET), no detailed guidelines for management and assessment of capstone projects are provided by these accreditation bodies. Variation in the management and assessment practices of capstone project courses and analysis of the students' capabilities to align with industry demands, to realize Vision 2030, is challenging. This study investigates the current practices for structure definition, management and assessment criteria used for capstone project courses at undergraduate level for information technology (IT) programs at Saudi universities.

A web-based questionnaire is administered using a web service commonly used for questionnaires and polls to investigate the structure, management and assessment of capstone projects at the undergraduate level offering software engineering, computer science and information technology (SECSIT) programs. In total, 42 faculty members (with range of experience of managing/advising capstone projects from 1 to more than 10 years) from 22 Saudi universities (out of more than 30 universities offering SECSIT undergraduate programs) participated in the study.

The authors have identified that Saudi universities are facing challenges in the utilized process model, the distribution of work and marks, the knowledge sharing approach and the assessment scheme. To cope with these challenges, the authors recommend the use of an incremental development process, the utilization of a project-driven approach, the development of a national level digital archive and the implementation of homogeneous assessment scheme.

To contribute to the national growth and to fulfill the market demand, universities are recommended to align the capstone project courses with latest technology trends. Universities must collaborate with the industry and update the structure and requirements of capstone project courses accordingly. This will further facilitate to bridge the gap between industry and academia and will develop a win–win scenario for all the stakeholders.

Although universities are committed to increase innovative capacities of their students for enabling them to contribute to economic and social growth, it is still hard to know the knowledge creation and sharing at national level. Variations in the management and assessment practices for capstone projects further intensify this challenge. Hence, there is a need of smart assessment and management of software capstone projects being developed in Saudi universities. Incorporating latest technologies, such unified management can facilitate discovering the trends and patterns related to the domain and complexity.

Course credentialing essentially involves the implementation of digital badges. A number of studies have recently been conducted that clarify this philosophy and promote their adoption in learning programmes. The research presented in this chapter contributes to the body of knowledge on learning and teaching regarding the comparative analyses of learning outcomes, multidimensional credentialing and digital badges relevant to the pedagogy of construction management. The aim of this research was to determine the maturity of multidimensional credentialing within its online pedagogy in particular. A review of literature pertaining to course multi-disciplining, accreditation, credentialing and digital badges had been conducted. Comparative analyses were performed to allocate learning outcomes of the tertiary institution and two accrediting bodies onto each unit in the online delivery mode of a Construction Management Bachelor Degree course. These analyses had yielded three matrices that could assist decision-making on how to assess learning in each unit. The results revealed that almost all units in this course had implemented at least one tertiary institution and accrediting body learning outcome.