Search results

In recent years, there has been significant interest in adopting XR (extended reality) technologies such as VR (virtual reality) and AR (augmented reality), particularly in retail. However, extending activities through reality-mediation is still mostly believed to offer an inferior experience due to their shortcomings in usability, wearability, graphical fidelity, etc. This study aims to address the research gap by experimentally examining the acceptance of metaverse shopping.

This study conducts a 2 (VR: with vs. without) × 2 (AR: with vs. without) between-subjects laboratory experiment involving 157 participants in simulated daily shopping environments. This study builds a physical brick-and-mortar store at the campus and stocked it with approximately 600 products with accompanying product information and pricing. The XR devices and a 3D laser scanner were used in constructing the three XR shopping conditions.

Results indicate that XR can offer an experience comparable to, or even surpassing, traditional shopping in terms of its instrumental and hedonic aspects, regardless of a slightly reduced perception of usability. AR negatively affected perceived ease of use, while VR significantly increased perceived enjoyment. It is surprising that the lower perceived ease of use appeared to be disconnected from the attitude toward metaverse shopping.

This study provides important experimental evidence on the acceptance of XR shopping, and the finding that low perceived ease of use may not always be detrimental adds to the theory of technology adoption as a whole. Additionally, it provides an important reference point for future randomized controlled studies exploring the effects of technology on adoption.

This study aims to enhance merging of additive manufacturing (AM) techniques with powder injection molding (PIM). In this way, the prototypes could be 3D-printed and mass production implemented using PIM. Thus, the surface properties and mechanical performance of parts produced using powder/polymer binder feedstocks [material extrusion (MEX) and PIM] were investigated and compared with powder manufacturing based on direct metal laser sintering (DMLS).

PIM parts were manufactured from 17-4PH stainless steel PIM-quality powder and powder intended for powder bed fusion compounded with a recently developed environmentally benign binder. Rheological data obtained at the relevant temperatures were used to set up the process parameters of injection molding. The tensile and yield strengths as well as the strain at break were determined for PIM sintered parts and compared to those produced using MEX and DMLS. Surface properties were evaluated through a 3D scanner and analyzed with advanced statistical tools.

Advanced statistical analyses of the surface properties showed the proximity between the surfaces created via PIM and MEX. The tensile and yield strengths, as well as the strain at break, suggested that DMLS provides sintered samples with the highest strength and ductility; however, PIM parts made from environmentally benign feedstock may successfully compete with this manufacturing route.

This study addresses the issues connected to the merging of two environmentally efficient processing routes. The literature survey included has shown that there is so far no study comparing AM and PIM techniques systematically on the fixed part shape and dimensions using advanced statistical tools to derive the proximity of the investigated processing routes.

Polymer laser powder bed fusion (PBF-LB/P) is an additive manufacturing technology that is sustainable due to the possibility of recycling the powder multiple times and allowing the fabrication of gears without the aid of support structures and subsequent assembly. However, there are constraints in the process that negatively affect its adoption compared to other additive technologies such as material extrusion to produce gears. This study aims to demonstrate that it is possible to overcome the problems due to the physics of the process to produce accurate mechanism.

Technological aspects such as orientation, wheel-shaft thicknesses and degree of powder recycling were examined. Furthermore, the evolving tooth profile was considered as a design parameter to provide a manufacturability map of gear-based mechanisms.

Results show that there are some differences in the functioning of the gear depending on the type of powder used, 100% virgin or 50% virgin and 50% recycled for five cycles. The application of a groove on a gear produced with 100% virgin powder allows the mechanism to be easily unlocked regardless of the orientation and wheel-shaft thicknesses. The application of a specific evolutionary profile independent of the diameter of the reference circle on vertically oriented gears guarantees rotation continuity while preserving the functionality of the assembled mechanism.

In the literature, there are various studies on material aging and reuse in the PBF-LB/P process, mainly focused on the powder deterioration mechanism, powder fluidity, microstructure and mechanical properties of the parts and process parameters. This study, instead, was focused on the functioning of gears, which represent one of the applications in which this technology can have great success, by analyzing the two main effects that can compromise it: recycled powder and vertical orientation during construction.

This study was conducted to address the methodical shortcomings and high associated cost of understanding the use of new, poorly understood architectural spaces, such as makerspaces. The proposed quantified method of enhancing current post-occupancy evaluation (POE) practices aims to provide architects, engineers and building professionals with accessible and intuitive data that can be used to conduct comparative studies of spatial changes, understand changes over time (such as those resulting from COVID-19) and verify design intentions after construction through a quantified post-occupancy evaluation.

In this study, we demonstrate the use of ultra-wideband (UWB) technology to gather, analyze and visualize quantified data showing interactions between people, spaces and objects. The experiment was conducted in a makerspace over a four-day hackathon event with a team of four actively tracked participants.

The study shows that by moving beyond simply counting people in a space, a more nuanced pattern of interactions can be discovered, documented and analyzed. The ability to automatically visualize findings intuitively in 3D aids architects and visual thinkers to easily grasp the essence of interactions with minimal effort.

By providing a method for better understanding the spatial and temporal interactions between people, objects and spaces, our approach provides valuable feedback in POE. Specifically, our approach aids practitioners in comparing spaces, verifying design intent and speeding up knowledge building when developing new architectural spaces, such as makerspaces.

This study aims to propose and evaluate the progress in the basic-pixel (a strategy to generate continuous trajectories that fill out the entire surface) algorithm towards performance gain. The objective is also to investigate the operational efficiency and effectiveness of an enhanced version compared with conventional strategies.

For the first objective, the proposed methodology is to apply the improvements proposed in the basic-pixel strategy, test it on three demonstrative parts and statistically evaluate the performance using the distance trajectory criterion. For the second objective, the enhanced-pixel strategy is compared with conventional strategies in terms of trajectory distance, build time and the number of arcs starts and stops (operational efficiency) and targeting the nominal geometry of a part (operational effectiveness).

The results showed that the improvements proposed to the basic-pixel strategy could generate continuous trajectories with shorter distances and comparable building times (operational efficiency). Regarding operational effectiveness, the parts built by the enhanced-pixel strategy presented lower dimensional deviation than the other strategies studied. Therefore, the enhanced-pixel strategy appears to be a good candidate for building more complex printable parts and delivering operational efficiency and effectiveness.

This paper presents an evolution of the basic-pixel strategy (a space-filling strategy) with the introduction of new elements in the algorithm and proves the improvement of the strategy’s performance with this. An interesting comparison is also presented in terms of operational efficiency and effectiveness between the enhanced-pixel strategy and conventional strategies.