Search results

This study explores the concept of hydraulic flushing gate with an automated control system as a flow control structure of the urban storm water system. The research team has implemented a flush gate with the automated control system to the flow of the water in a drainage channel. The flow control structure was used to determine the effectiveness of such design by applying the concept of virtually on a real-world drainage system at Jalan Astana, Kuching. Computer representations of the existing drainage system and flow control structure were built using EPA SWMM 5.0 model. The series of flow control structure was proven to hold the runoff from 10-year storm. The modelling result shows that there is 25.9% of flow reduction at outlet node. As a modification of the existing drainage system in the urban area involves high construction cost, by installing a flow control structure in the drainage system is an innovative way to control the flow of the water.

The purpose of the present study is to develop a new numerical framework that can predict the supersonic base flow more accurately, including the development of axisymmetrically separated shear layer and recompression shock. To this end, two aspects are improved and combined, i.e. a newly self-adaptive turbulence eddy simulation (SATES) turbulence modeling method and a high-order discretization numerical scheme. Furthermore, the performance of the new numerical framework within a general-purpose PHengLEI software is assessed in detail.

Satisfactory prediction of the supersonic separated shear layer with unsteady wake flow is quite challenging. By using a unified turbulence model called SATES combining high-order accurate discretization numerical schemes, the present study first assesses the performance of newly developed SATES for supersonic axisymmetric separation flows. A high-order finite differencing-based compressible computational fluid dynamics (CFD) code called PHengLEI is developed and several different numerical schemes are used to investigate the effects on shock-turbulence interactions, which include the monotonic upstream-centered scheme for conservation laws (MUSCL), weighted compact nonlinear scheme (WCNS) and hybrid cell-edge and cell-node dissipative compact scheme (HDCS).

Compared with the available experimental data and the numerical predictions, the results of SATES by using high-order accurate WCNS or HDCS schemes agree better with the experiments than the results by using the MUSCL scheme. The WCNS and HDCS can also significantly improve the prediction of flow physics in terms of the instability of the annular shear layer and the evolution of the turbulent wake.

The small deviations in the recirculation region can be found between the present numerical results and experimental data, which could be caused by the inaccurate incoming boundary layer condition and compressible effects. Therefore, a proper incoming boundary layer condition with turbulent fluctuations and compressibility effects need to be considered to further improve the accuracy of simulations.

The present study evaluates a high-order discretization-based SATES turbulence model for supersonic separation flows, which is quite valuable for improving the calculation accuracy of aeronautics applications, especially in supersonic conditions.

For the first time, the newly developed SATES turbulence modeling method combining the high-order accurate WCNS or HDCS numerical schemes is implemented on the PHengLEI software and successfully applied for the simulations of supersonic separation flows, and satisfactory results are obtained. The unsteady evolutions of the supersonic annular shear layer are analyzed, and the hairpin vortex structures are found in the simulation.

This paper aims to propose a method for automatic design of additive manufacturing (AM) flow channel paths driven by path length and pressure loss. The research focuses on the automatic design of channel paths, intending to achieve the shortest flow channel length or minimum pressure loss and improve the design efficiency of AM parts.

The initial layout of the flow channels is redesigned to consider the channels print supports. Boundary conditions and constraints are defined according to the redesigned channels layout, and the equation consisting of channel length and pressure loss is used as the objective function. Then the path planning simulation is performed based on particle swarm algorithm. The proposed method describes the path of flow channels using spline cures. The spline curve is controlled by particle (one particle represents a path), and the particle is randomly generated within the design space. After the path planning simulation is completed, the generated paths are used to create 3D parts.

Case study 1 demonstrates the automatic design of hydraulic spool valve. Compared to conventional spool valve, the pressure loss was reduced by 86% and the mass was reduced by 83%. The design results of case study 2 indicate that this approach is able to find the shortest channel path with lower computational cost.

The automatic design method of flow channel paths driven by path length and pressure loss presented in this paper provides a novel solution for the creation of AM flow components.

Physics-informed neural networks (PINNs) have become a new tendency in flow simulation, because of their self-advantage of integrating both physical and monitored information of fields in solving the Navier–Stokes equation and its variants. In view of the strengths of PINN, this study aims to investigate the impact of spatially embedded data distribution on the flow field results around the train in the crosswind environment reconstructed by PINN.

PINN can integrate data residuals with physical residuals into the loss function to train its parameters, allowing it to approximate the solution of the governing equations. In addition, with the aid of labelled training data, PINN can also incorporate the real site information of the flow field in model training. In light of this, the PINN model is adopted to reconstruct a two-dimensional time-averaged flow field around a train under crosswinds in the spatial domain with the aid of sparse flow field data, and the prediction results are compared with the reference results obtained from numerical modelling.

The prediction results from PINN results demonstrated a low discrepancy with those obtained from numerical simulations. The results of this study indicate that a threshold of the spatial embedded data density exists, in both the near wall and far wall areas on the train’s leeward side, as well as the near train surface area. In other words, a negative effect on the PINN reconstruction accuracy will emerge if the spatial embedded data density exceeds or slips below the threshold. Also, the optimum arrangement of the spatial embedded data in reconstructing the flow field of the train in crosswinds is obtained in this work.

In this work, a strategy of reconstructing the time-averaged flow field of the train under crosswind conditions is proposed based on the physics-informed data-driven method, which enhances the scope of neural network applications. In addition, for the flow field reconstruction, the effect of spatial embedded data arrangement in PINN is compared to improve its accuracy.

Water jet propulsion is widely used in various military and civilian fields due to its advantages of simple structure and high propulsion efficiency. The process of mooring involves utilizing specially designed equipment to secure a ship at a designated berth. During the process of water jet propulsion, the single propeller operates within a complex and turbulent three-dimensional flow. Hence, studying the coupling between the water jet propeller and the hull is critical to comprehending the characteristics of the device and the distribution of the flow field in detail.

Firstly, we conducted computational fluid dynamics (CFD)-based self-propulsion calculations to evaluate the interaction between the hull and the propeller. We subsequently analyzed the propeller's performance and the forces acting on the hull to understand how the presence or absence of the hull influenced the water jet propeller. Finally, we performed calculations and analysis of the cavitation characteristics of the coupling between the hull and the water jet propeller, considering different rotational speeds and water depths at the bottom of the pool.

The study demonstrated that the presence of the hull boundary layer under the hull-propeller coupling condition led to reduced uniformity of propeller inlet flow and lower efficiency of the propulsion pump. However, it also increased the bias toward low-flow conditions. Additionally, increasing the impeller speed led to a gradual increase in the cavitation volume within the water jet propeller, resulting in a gradual decrease in the propeller's performance.

This research provides the technical support required for effective design and operation of water jet propulsion systems. This paper involves studying and analyzing the performance and flow field of the coupling between the hull and propeller under mooring conditions with a specified hull model.

This study aims to investigate the noise-inducing characteristics during the start-up process of a mixed-flow pump and the impact of different start-up schemes on pump noise.

This study conducted numerical simulations on the mixed-flow pump under different start-up schemes and investigated the flow characteristics and noise distribution under these schemes.

The results reveal that the dipole noise is mainly caused by pressure fluctuations, while the quadrupole noise is mainly generated by the generation, development and breakdown of vortices. Additionally, the noise evolution characteristics during the start-up process of the mixed-flow pump can be divided into the initial stage, stable growth stage, impulse stage and stable operation stage.

The findings of this study can provide a theoretical basis for the selection of start-up schemes for mixed-flow pumps, reducing flow noise and improving the operational stability of mixed-flow pumps.

To delve into the integration of global logistics and supply chain networks amidst the digital transformation era. This study aims to investigate the potential role of China’s Belt and Road Initiative (BRI) in facilitating the integration of global flows encompassing both tangible goods and intangibles. Additionally, the study seeks to incorporate third-party logistics activities into a comprehensive global logistics and supply chain integration framework.

Prior research is synthesised into a global logistics and supply chain integration framework. A case study was undertaken on Yuan Tong (YTO) express group to investigate the framework, employing qualitative data analysis techniques. The study specifically examined the context of the BRI to enhance comprehension of its impact on global supply chains. Information was collected in particular to two types of supply chain flows, the physical flow of goods, and intangible information and cash flows.

The proposed framework aligns well with the case study, leading to the identification of global logistics and supply chain integration enablers. The results demonstrate a range of ways BRI promotes global logistics and supply chain integration.

The case study, with multiple examples, focuses on how third-party logistics firms can embrace global logistics and supply chain integration in line with BRI. The case study approach limits generalisation, further applications in different contexts are required to validate the findings.

The framework holds promise for aiding practitioners and researchers in gaining deeper insights into the role of the BRI in global logistics and supply chain integration within the digital era. The identified enablers underscore the importance of emphasising key factors necessary for success in navigating digital transformation within global supply chains.

Flow induced by rotating disks is of great practical importance in several engineering applications such as rotating heat exchangers, turbine disks, pumps and many more. The present research has been freshly displayed regarding the implementation of an engine oil-based Casson tri-hybrid nanofluid across a rotating disk in mass and heat transferal developments. The purpose of this study is to contemplate the attributes of the flowing tri-hybrid nanofluid by incorporating porosity effects and magnetization and velocity slip effects, viscous dissipation, radiating flux, temperature slip, chemical reaction and activation energy.

The articulated fluid flow is described by a set of partial differential equations which are converted into one set of higher-order ordinary differential equations (ODEs) by using convenient conversions. The numerical solution of this transformed set of ODEs has been spearheaded by using the effectual bvp4c scheme.

The acquired results show that the heat transmission rate for the Casson tri-hybrid nanofluid is intensified by, respectively, 9.54% and 11.93% when compared to the Casson hybrid nanofluid and Casson nanofluid. Also, the mass transmission rate for the Casson tri-hybrid nanofluid is augmented by 1.09% and 2.14%, respectively, when compared to the Casson hybrid nanofluid and Casson nanofluid.

The current investigation presents an educative response on how the flow profiles vary with changes in the inevitable flow parameters. As per authors’ knowledge, no such scrutinization has been carried out previously; therefore, our results are novel and unique.

The purpose of the research is to examine the impact of leader humor on employee job crafting. Using the insights from self-determination theory (SDT), we investigate the underlying mechanism of employees’ flow at work and the moderating role of employees’ playfulness trait.

We adopted a three-wave field survey of 306 employees recruited from various industries. The moderated mediation model was examined using latent structural equation model analysis.

Results revealed that leader humor positively affected employees’ flow at work and subsequent job crafting. Moreover, both the direct effect of leader humor on employees’ flow at work and the indirect effect of leader humor on employees’ job crafting via flow at work were amplified by employees’ playfulness trait.

Leaders are encouraged to use jokes and humorous language to facilitate job crafting among playful subordinates. Organizations can create a work environment conducive to flow at work through job redesign, regardless of employees’ levels of playfulness trait.

The paper uncovers the critical role of flow in the relationship between leader humor and employee job crafting and identifies employees’ playfulness trait as a boundary condition in which leader humor works.

A novel type of heat transfer fluid known as hybrid nanofluids is used to improve the efficiency of heat exchangers. It is observed from literature evidence that hybrid nanofluids outperform single nanofluids in terms of thermal performance. This study aims to address the stagnation point flow induced by Williamson hybrid nanofluids across a vertical plate. This fluid is drenched under the influence of mixed convection in a Darcy–Forchheimer porous medium with heat source/sink and entropy generation.

By applying the proper similarity transformation, the partial differential equations that represent the leading model of the flow problem are reduced to ordinary differential equations. For the boundary value problem of the fourth-order code (bvp4c), a built-in MATLAB finite difference code is used to tackle the flow problem and carry out the dual numerical solutions.

The shear stress decreases, but the rate of heat transfer increases because of their greater influence on the permeability parameter and Weissenberg number for both solutions. The ability of hybrid nanofluids to strengthen heat transfer with the incorporation of a porous medium is demonstrated in this study.

The findings may be highly beneficial in raising the energy efficiency of thermal systems.

The originality of the research lies in the investigation of the Darcy–Forchheimer stagnation point flow of a Williamson hybrid nanofluid across a vertical plate, considering buoyancy forces, which introduces another layer of complexity to the flow problem. This aspect has not been extensively studied before. The results are verified and offer a very favorable balance with the acknowledged papers.