Search results

This paper aims to trial a novel method of improving the performance of rail systems. Accordingly, an evaluation of rail system dynamics (SD) using discrete event simulation (DES) will be undertaken. Globally, cities and their transportation systems face ongoing challenges with many of these resulting from complicated rail SD. To evaluate these challenges, this study utilized DES as the basis of the analysis of Melbourne Metro Rail's SD. The transportation SD processes including efficiency and reliability were also developed.

Using DES, this research examines and determines the Melbourne Metro Rail's SD. Although the Melbourne Metro Rail is still in progress, the DES developed in this research examined the system requirements of functionality, performance and integration. As the basis of this examination, the Melbourne Metro Rail's optimization was simulated using the developed DES. As the basis of the experiment, a total of 50 trials were simulated. This included 25 samples for each of efficiency and reliability. The simulation not only scrutinized the SD but also underlined some of its shortfalls.

This study found that information and communication technology (ICT) was the pinnacle of system application. The DES development highlighted that both efficiency and reliability rates are the essential SD and thus fundamental for Melbourne Metro Rail system functionality. Specifically, the three elements of SD, capacity, continuity and integration are considered critical in improving the system functionality of Melbourne Metro Rail.

This particular mega rail infrastructure system was carefully analyzed, and subsequently, the DES was developed. However, since the DES is at its inception, the results are relatively limited without inclusive system calibration or validation process. Nonetheless, with some modifications, such as using different KPIs to evaluate additional systems variables and setting appropriate parameters to test the system reliability measures at different intensities, the developed DES can be modified to examine and evaluate other rail systems. However, if a broader system analysis is required, the DES model subsequently needs to be modified to specific system parameters.

Through evaluation of Melbourne's Metro Rail in the manner described above, this research has shown the developed DES is a useful platform to understand and evaluate system efficiency and reliability. Such an evaluation is considered important when implementing new transport systems, particularly when they are being integrated into existing networks.

Efficient rail networks are critical for modern cities and such systems, while inherently complex, aid local economies and societal cohesion through predictable and reliable movement of people. Through improved system functionality and greater efficiencies, plus improved passenger safety, security and comfort, the traveling public will benefit from the enhanced reliability of the transportation network that results from research as that provided in this paper.

This research paper is the first of its kind specifically focusing on the application of DES on the Melbourne Metro Rail System. The developed model aligns with the efficiency optimization framework, which is central to rail systems. The model shows the relationship between increased efficiency and optimizing system reliability. In comparison with more advanced mathematical modeling, the DES presented in this research provides robust, but yet rapid and uncomplicated system enhancements. These findings can better prepare rail professionals to adequately plan and devise appropriate system measures.

Polymer laser powder bed fusion (PBF-LB/P) is an additive manufacturing technology that is sustainable due to the possibility of recycling the powder multiple times and allowing the fabrication of gears without the aid of support structures and subsequent assembly. However, there are constraints in the process that negatively affect its adoption compared to other additive technologies such as material extrusion to produce gears. This study aims to demonstrate that it is possible to overcome the problems due to the physics of the process to produce accurate mechanism.

Technological aspects such as orientation, wheel-shaft thicknesses and degree of powder recycling were examined. Furthermore, the evolving tooth profile was considered as a design parameter to provide a manufacturability map of gear-based mechanisms.

Results show that there are some differences in the functioning of the gear depending on the type of powder used, 100% virgin or 50% virgin and 50% recycled for five cycles. The application of a groove on a gear produced with 100% virgin powder allows the mechanism to be easily unlocked regardless of the orientation and wheel-shaft thicknesses. The application of a specific evolutionary profile independent of the diameter of the reference circle on vertically oriented gears guarantees rotation continuity while preserving the functionality of the assembled mechanism.

In the literature, there are various studies on material aging and reuse in the PBF-LB/P process, mainly focused on the powder deterioration mechanism, powder fluidity, microstructure and mechanical properties of the parts and process parameters. This study, instead, was focused on the functioning of gears, which represent one of the applications in which this technology can have great success, by analyzing the two main effects that can compromise it: recycled powder and vertical orientation during construction.

The purpose of this study was to improve the overall equipment effectiveness (OEE) of the production process of the shredder operation of ABC company, an industrial waste management company which supplies pre-processed industrial waste as alternative fuel to a cement plant.

This case study investigated all possible availability and performance losses that caused the shredder system’s OEE and various problem-solving techniques, such as root cause analysis and Pareto analysis, were used to find the root cause of the reduced OEE.

After analysing this case study, three significant loss factors were identified from all the availability and performance losses, which caused the shredder system’s OEE losses. Practical solutions were found for the effect of those loss factors to improve the machine’s OEE and productivity.

This case study has been concentrated on only analysing of losses and improvement of OEE in the production process and not about cost analysis between loss and improvements.

This paper shows how to improve the OEE of a production process through various problem-solving techniques by identifying its losses and how to achieve the best solutions for those losses in a practical manner.

The study delves into the influence of wear cycles on these parameters. The purpose of this paper is to identify characteristic patterns of σ_RS and ε_PEEQ that discern varying wear situations, thereby contributing to the enrichment of wear theory. Furthermore, the findings serve as a foundational basis for nondestructive and in situ wear detection methodologies, such as nonlinear ultrasonic detection, known for its sensitivity to σ_RS and ε_PEEQ.

This paper elucidates the wear mechanism through the lens of residual stress (σ_RS) and plastic deformation within distinct fretting regimes, using a two-dimensional cylindrical/flat contact model. It specifically explores the impact of the displacement amplitude and cycles on the distribution of residual stress and equivalent plastic strain (ε_PEEQ) in both gross slip regime and partial slip regimes.

Therefore, when surface observation of wear is challenging, detecting the σ_RS trend at the center/edge, region width and ε_PEEQ distribution, as well as the maximum σ_RS distribution along the depth, proves effective in distinguishing wear situations (partial or gross slip regimes). However, discerning wear situations based on ε_PEEQ along the depth direction remains challenging. Moreover, in the gross slip regime, using σ_RS distribution or ε_PEEQ along the width direction rather than the depth direction can effectively provide feedback on cycles and wear range.

This work introduces a novel perspective for investigating wear theory through the distribution of residual stress (σ_RS) and equivalent plastic strain (ε_PEEQ). It presents a feasible detection theory for wear situations using nondestructive and in situ methods, such as nonlinear ultrasonic detection, which is sensitive to σ_RS and ε_PEEQ.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2024-0005/

The purpose of this work is to optimize the monitoring of vibrations on dynamometric test rigs for railway brakes. This is a quite demanding application considering the continuous increase of performances of high-speed trains that involve higher testing specifications for brake pads and disks.

In this work, authors propose a mixed approach in which relatively simple finite element models are used to support the optimization of a diagnostic system that is used to monitor vibration levels and rotor-dynamical behavior of the machine. The model is calibrated with experimental data recorded on the same rig that must be identified and monitored. The whole process is optimized to not interfere with normal operations of the rig, using common inertial sensor and tools and are available as standard instrumentation for this kind of applications. So at the end all the calibration activities can be performed normally without interrupting the activities of the rig introducing additional costs due to system unavailability.

Proposed approach was able to identify in a very simple and fast way the vibrational behavior of the investigated rig, also giving precious information concerning the anisotropic behavior of supports and their damping. All these data are quite difficult to be found in technical literature because they are quite sensitive to assembly tolerances and to many other factors. Dynamometric test rigs are an important application widely diffused for both road and rail vehicles. Also proposed procedure can be easily extended and generalized to a wide value of machine with horizontal rotors.

Most of the studies in literature are referred to electrical motors or turbomachines operating with relatively slow transients and constant inertial properties. For investigated machines both these conditions are not verified, making the proposed application quite unusual and original with respect to current application. At the same time, there is a wide variety of special machines that are usually marginally covered by standard testing methodologies to which the proposed approach can be successfully extended.

Government communication is an essential part of the democratic process – it interconnects various stakeholder groups with the public, while also enabling the functioning of democratic systems based on values such as human rights, freedom of speech and public participation in governance. Besides promoting government successes or measures, government communication should foster mutual two-way communications between government organisations and different stakeholder groups. Specifically, communication about potential risks and hazards can suddenly appear and are subject to a different communication modus operandi. The accessibility and comprehensiveness of government information play an important role in how citizens make decisions and behave. In critical times, governments are required to meaningful crisis communication strategies to address the needs of different stakeholders. However, the Czech Republic as a post-communist country has not yet fully developed an integrated system of government communication with various stakeholder groups. The ministerial PR departments serve merely as technical support and media relations assistants for the ministers. This chapter presents research results regarding how the Czech Ministry of Education communicated during the pandemic crisis, how its communications were received by key stakeholders, and what pitfalls in communication it faced. The chapter presents empirical evidence of government communication challenges in times of crisis in a post-communist country and thus addresses the gap in government communication knowledge concerning the role of democracy and stakeholder participation in transforming societies. The chapter concludes with practical implications to prevent failures in future crises.

The scaling of social initiatives is important to achieve broad social impact based on successful small-scale experiments. This paper focuses on the influence of the characteristics of the initiators of social initiatives on scaling processes. The limited literature on this topic highlights two critical actor characteristics: high entrepreneurial skills and a central position in the area. Both characteristics influence two critical components of the scaling process: mobilizing stakeholders and focusing on retaining effectiveness. The purpose of this paper is to explore these complex relationships in a deductive analysis and to use these findings for an inductive analysis to generate new insights and extend our academic understanding.

A comparative qualitative study of 20 social initiatives in the Dutch social sector was conducted, including 48 in-depth interviews with initiators and stakeholders in three different areas – mental health, debt and labour participation.

High entrepreneurial skills are more important for mobilizing stakeholders and focusing on retention of effectiveness than the position of the initiators, but these are a condition rather than a guarantee. Creating space for scaling and investing in measuring effectiveness in other contexts are also important.

By combining the literature on social entrepreneurship and public innovation and conducting an empirical study, our study provides a broad and nuanced picture and brings precision to our understanding of the relationships between initiators' entrepreneurial skills and position and the scaling process.

Rapid technological change in the transport sector is leading to a growing range of potential and actual ‘business models’ deployable for the movement of goods and people. Two key uncertainties arise from this proliferation: first, concerning which ones can be economically viable, and, second, whether they can be both simultaneously economically viable and contribute to the imperatives of more sustainable mobility. The present chapter reviews and appraises the emergence of these new business models, drawing on both literature review and empirical research with entrepreneurs involved in the new mobility sector. Specifically, the potential of the UN Sustainable Development Goals (SDGs) (UN, n.d.) as a device to structure and frame the debate about what constitutes a valuable contribution to sustainable mobility is considered. A framework is developed which captures how mobility and transport have dependencies with the SDGs. From this analysis, key sustainability concepts are derived which have either a subsistence function (maintaining the basics of human life) or an enhancement function (enabling citizens to realise their potential whilst reducing impacts on the planet). Five different innovations involving mobility sector business entrepreneurship are then characterised using this framework to exemplify its ability to deconstruct and test claims that ‘smart mobility’ is also good for sustainability as well as good for business. It is concluded that the framework could contribute to a wider architecture of sustainability interrogation. It could promote discourse around a wide range of actors, posing questions and surfacing tensions and contingencies effectively, whilst providing a holistic, strategic assessment to inform more targeted, scientific evaluations of sustainability metrics.

An investigation was conducted into the impact of various process parameters on the surface and subsurface quality of glass-ceramic materials, as well as the mechanism of material removal and crack formation, through the use of ultrasonic-assisted grinding.

A mathematical model of crack propagation in ultrasonic-assisted grinding was established, and the mechanism of crack formation was described through the model. A series of simulations and experiments were conducted to investigate the impact of process parameters on crack depth, surface roughness, and surface topography during ultrasonic-assisted surface and axial grinding. Additionally, the mechanism of crack formation was explored.

During ultrasonic-assisted grinding, the average grinding forces are between 0.4–1.0 N, which is much smaller than that of ordinary grinding (1.0–3.5 N). In surface grinding, the maximum surface stresses between the workpiece and the tool gradually decrease with the tool speed. The surface stresses of the workpiece increase with the grinding depth, and the depth of subsurface cracks increases with the grinding depth. With the increase of the axial grinding speed, the subsurface damage depth increases. The roughness increases from 0.780um/1.433um.

A mathematical model of crack propagation in ultrasonic-assisted grinding was established, and the mechanism of crack formation was described through the model. The deformation involved in the grinding process is large, and the FEM-SPH modeling method is used to solve the problem that the results of the traditional finite element method are not convergent and the calculation efficiency is low.