Search results

(1) A mathematical model for the Hybrid nanofluids flow is used as carriers for delivering drugs. (2) The flow conditions are controlled to enable drug-loaded nanofluids to flow through the smaller gap between the two tubes. (3) Hybrid nanofluids (HNFs) made from silver (Ag) and titanium dioxide (TiO₂) nanoparticles are analyzed for applications of drug delivery. (Ag) and (TiO₂) (NPs) are suitable candidates for cancer treatment due to their excellent biocompatibility, high photoactivity, and low toxicity. (4) The new strategy of artificial neural networks (ANN) is used which is machine-based and more prominent in validation, and comparison with other techniques.

The two Tubes are settled in such a manner that the gap between them is uniform. The Control Volume Finite Element Method; Rk-4 and Artificial Neural Network (ANN).

(1) From the obtained results it is observed that the dispersion and distribution of drug-loaded nanoparticles within the body will be improved by the convective motion caused by hybrid nanofluids. The effectiveness and uniformity of drug delivery to target tissues or organs is improved based on the uniform flow and uniform gap. (2) The targeting efficiency of nanofluids is further improved with the addition of the magnetic field. (3) The size of the cylinders, and flow rate, are considered uniform to optimize the drug delivery.

(1)The flow phenomena is considered laminar, one can use the same idea through a turbulent flow case. (2) The gap is considered uniform and will be interesting if someone extends the idea as non-uniform.

(1) To deliver drugs to the targeted area, a suitable mathematical model is required. (2) The analysis of hybrid nanofluids (HNFs) derived from silver (Ag) and titanium dioxide (TiO₂) nanoparticles is conducted for the purpose of drug delivery. The biocompatibility, high photoactivity, and low toxicity of (Ag) and (TiO₂) (NPs) make them ideal candidates for cancer treatment. (3) Machine-based artificial neural networks (ANN) have a new strategy that is more prominent in validation compared to other techniques.

The drug delivery model is a useful strategy for new researchers. (1) They can extend this idea using a non-uniform gap. (2) The flow is considered uniform, the new researchers can extend the idea using a turbulent case. (3) Other hybrid nanofluids flow, in the same model for other industrial usages are possible.

All the obtained results are new. The experimental thermophysical results are used from the existing literature and references are provided.

Without precedent, green bonds confront, for the first time since their emergence, a twofold crisis context, namely the Covid-19-Russian–Ukrainian crisis period. In this context, this paper aims to investigate the connectedness between the two pioneering bond market classes that are conventional and treasury, with the green bonds market.

In their forecasting target, authors use a Support Vector Regression model on daily S&P 500 Green, Conventional and Treasury Bond Indexes for a year from 2012 to 2022.

Authors argue that conventional bonds could better explain and predict green bonds than treasury bonds for the three studied sub-periods (pre-crisis period, Covid-19 crisis and Covid-19-Russian–Ukrainian crisis period). Furthermore, conventional and treasury bonds lose their forecasting power in crisis framework due to enhancements in market connectedness relationships. This effect makes spillovers in bond markets more sensitive to crisis and less predictable. Furthermore, this research paper indicates that even if the indicators of the COVID-19 crisis have stagnated and the markets have adapted to this rather harsh economic framework, the forecast errors persist higher than in the pre-crisis phase due to the Russian–Ukrainian crisis effect not yet addressed by the literature.

This study has several implications for the field of green bond forecasting. It not only illuminates the market participants to the best market forecasters, but it also contributes to the literature by proposing an unadvanced investigation of green bonds forecasting in Crisis periods that could help market participants and market policymakers to anticipate market evolutions and adapt their strategies to period specificities.

Using different trade indices spanning 2018–2021, this chapter investigates Afghanistan's current patterns, prospects and barriers for intra- and inter-regional trade perspectives, emphasising the different pathways by which Afghanistan trades with Central Asian economies. The empirical findings demonstrate that the anticipated significance of trade between Afghanistan and Central Asia is double compared to the existing levels of trade. Furthermore, the analysis encompasses the categorisation of sectors based on the intensity of usage of production factors like resource, labour and technology. The analysis further elaborates on Afghanistan's trade potential with Central Asia and vice versa by highlighting the comparative advantage, diversification, complementarity and similarity in trade. The findings suggest that larger economies are rated higher than smaller ones as size and development level are essential factors in regional trade development. The most effective channels of regional trade development are price competitiveness measures, intra-industry trade and trade complementarities. These findings have a substantial influence on the development of different trade policy efforts to stimulate investment and trade within and among the two regions.

This study aims to investigate the wetting behavior of AgCuTi and AgCu filler metals on selective laser melting (SLMed) Ti/TiB₂, and to analyze the microstructure and fracture characteristics of SLMed Ti/TiB₂/AgCuTi or AgCu alloy/SLMed Ti/TiB₂ brazed joints. The wetting behavior of AgCuTi and AgCu filler metals on the selective laser melted (SLMed) Ti/TiB₂ has been studied. The analysis of microstructures and fracture characteristics in vacuum-brazed SLMed Ti/TiB₂ substrate, using AgCuTi and AgCu filler metals, has been conducted to elucidate the influence of brazing temperature and alloy composition on the shear strength of the brazed joints.

Brazing SLMed-Ti/TiB₂ in a vacuum using AgCuTi and AgCu filler metals, this study aims to explore the optimal parameters for brazed joints at various brazing temperatures (800°C−950°C).

The findings suggest that elevated brazing temperatures lead to a more extensive diffusion region in the joint as a result of the partial melting of the filler metal. The joint composition changes from distinct Ti₂Cu layer/TiCu layer/filler metal to a-Ti (ss) + ß-Ti (ss)/TiCu. As the brazing temperature increases, the fracture mode shifts from brittle cleavage to ductile fracture, mainly attributed to a decrease in the CuTi within the brazed joint. This change in fracture behavior indicates an improvement in the ductility and toughness of the joint.

The originality of this study lies in the comprehensive analysis of the microstructure and shear strength of vacuum brazing SLMed Ti/TiB₂ using AgCuTi and AgCu filler metals.

Food loss and wastage is an issue of global concern and the household sector is one of the biggest contributors to this. Solar drying has been explored by many eminent researchers as a solution to this problem but there have been concerns about the lack in designs, higher cost, lower performance, and consumer acceptability. The present research aims to design a small-scale domestic solar dryer by using computer software.

Response surface methodology (RSM) and computational fluid dynamics (CFD) are used to design the domestic solar dryer. Initially, design variables (inlet and outlet vent height) are identified and a design of experiments has been created using RSM for set of experimental runs. The experimental runs suggested by RSM were carried out using CFD simulation in COMSOL Multiphysics software and the results were used for optimization of response variables (outlet velocity and drying chamber temperature) in RSM.

Outlet vent height was found to be most significantly affecting parameter to both the responses. The optimum values of inlet and outlet vent heights were 0.5 and 2.5 cm, respectively with the overall desirability of 0.728. The model accuracy was tested by conducting a confirmation test as post processing in design expert software.

Designing a solar dryer is a complex, costly and time consuming process, this study presents an easy, economic and fast method to design a new solar dryer. It would help researchers to design and develop new domestic as well as large size industrial solar dryer.

The paper aims to deal with the enhancement of a simplified method for the design of concrete columns subject to fire toward applications on circular and tubular cross-sections. The original zone method, developed by Hertz as a plastic design method, has been extended by Achenbach for the use as a nonlinear method. This proposed extended zone method (EZM) is verified by checking the theoretical background and is successfully validated by the recalculation of laboratory tests.

The zone method assumes a reduction of a cross-section by a “damaged” zone. The remaining area is modeled with the constant, temperature-dependent material properties. The equations for the calculation of the damaged zone to model the loss of cross-section resistance or stiffness are derived. The proposed equations are validated by the recalculation of laboratory test and compared to the results of the advanced method (AM).

It can be shown that the EZM is suitable for the check of the fire resistance of circular concrete columns and leads to a safe and economic design. The method provides a suitable alternative to more sophisticated AM. The further extension toward tubular spun columns is discussed und is the object of the ongoing research.

Presented enhancement extends the range of applications of the EZMs toward circular and tubular cross sections, which has previously not been examined.

This paper aims to reduce waste management and generate wealth by investigating the novelty of combining chicken feather fiber and bamboo particles to produce hybrid biocomposites. This is part of responsible production and sustainability techniques for sustainable development goals. This study aims to broaden animal and plant fiber utilization in the sustainable production of epoxy resins for engineering applications.

This research used two reinforcing materials [chicken feather fiber (CFF) and bamboo particles (BP)] to reinforce epoxy resin. The BPs were kept constant at 6 Wt.%, while the CFF was varied within 3–15 Wt.% in the composites to make CFF-BP polymer-reinforced composite (CFF-BP PRC). The mechanical experiment showed a 21% reduction in densities, making the CFF-BP PRC an excellent choice for lightweight applications.

It was discovered that fabricated composites with 10 mm CFF length had improved properties compared with the 15 mm CFF length and pristine samples, which confirmed that short fibers are better at enhancing randomly dispersed fibers in the epoxy matrix. However, the ballistic properties of both samples matched. There is a 40% increase in tensile strength and a 54% increase in flexural strength of the CFF-BP PRC compared to the pristine sample.

According to the literature review, to the best of the authors’ knowledge, this is a novel study of chicken fiber and bamboo particles in reinforcing epoxy composite.

Material extrusion-based additive manufacturing is a prominent manufacturing technique to fabricate complex geometrical three-dimensional (3D) parts. Despite the indisputable advantages of material extrusion-based technique, the poor surface and subsurface integrity hinder the industrial application of this technology. The purpose of this study is introducing the hot air jet treatment (HAJ) technique for surface treatment of additive manufactured parts.

In the presented research, novel theoretical formulation and finite element models are developed to study and model the polishing mechanism of printed parts surface through the HAJ technique. The model correlates reflow material volume, layer width and layer height. The reflow material volume is a function of treatment temperature, treatment velocity and HAJ velocity. The values of reflow material volume are obtained through the finite element modeling model due to the complexity of the interactions between thermal and mechanical phenomena. The theoretical model presumptions are validated through experiments, and the results show that the treatment parameters have a significant impact on the surface characteristics, hardness and dimensional variations of the treated surface.

The results demonstrate that the average value of error between the calculated theoretical results and experimental results is 14.3%. Meanwhile, the 3D plots of Ra and Rq revealed that the maximum values of Ra and Rq reduction percentages at 255°C, 270°C, 285°C and 300°C treatment temperatures are (35.9%, 33.9%), (77.6%,76.4%), (94%, 93.8%) and (85.1%, 84%), respectively. The scanning electron microscope results illustrate three different treatment zones and the treatment-induced and manufacturing-induced entrapped air relief phenomenon. The measured results of hardness variation percentages and dimensional deviation percentages at different regimes are (8.33%, 0.19%), (10.55%, 0.31%) and (−0.27%, 0.34%), respectively.

While some studies have investigated the effect of the HAJ process on the structural integrity of manufactured items, there is a dearth of research on the underlying treatment mechanism, the integrity of the treated surface and the subsurface characteristics of the treated surface.

Based on the weak seismic performance and low ductility of coupled shear walls, engineered cementitious composites (ECC) is utilized to strengthen it to solve the deformation problem in tall buildings more effectively and study its mechanical properties more deeply.

The properties of reinforced concrete coupled shear wall (RCCSW) and reinforced ECC coupled shear wall (RECSW) have been studied by numerical simulation, which is in good agreement with the experimental results. The reliability of the finite element model is verified. On this basis, a detailed parameter study is carried out, including the strength and reinforcement ratio of longitudinal rebar, the placement height of ECC in the wall limb and the position of ECC connecting beams. The study indexes include failure mode and the skeleton curve.

The results suggest that the bearing capacity of RECSW is significantly affected by the ratio of longitudinal rebar. When the ratio of longitudinal rebar increases from 0.47% to 3.35%, the bearing capacity of RECSW increases from 250 kN to 303 kN, an increase of 21%. The strength of longitudinal rebar has little influence on the bearing capacity of RECSW. When the strength of the longitudinal rebar increases, the bearing capacity of RECSW increases little. The failure mode of RECSW can be improved by lowering the casting height of the ECC beam in a certain range.

In this paper, ECC is used to strengthen the coupled shear wall, and the accuracy of the finite element model is verified from the failure mode and skeleton curve. On this basis, the casting height of the ECC casting wall limb, the strength and reinforcement ratio of longitudinal rebar and the position of the ECC beam are studied in detail.

This project inquires whether transitioning to adopting sustainable practices involves emphasizing the significance of education and skill development that aligns with employees' knowledge. Additionally, this project explores whether soft skills can act as a means for effective communication, collaboration and ethical decision-making when addressing the intricate and socially interconnected nature of sustainability challenges. Thus, this research explores employee sustainability knowledge and soft skills to gain a more nuanced understanding to provide evidence-based recommendations to enhance organizational sustainability initiatives.

This study used a form of chain-referral sampling with two populations. A two-step cluster analysis with a log-likelihood distance measure and Schwarz’s Bayesian criterion was employed to identify communities of employees with different levels of sustainable practices and soft skills knowledge. A corresponding analysis was conducted to better understand different communities in terms of industry and managerial experience. A confirmatory factor analysis was conducted using a covariance-based measurement model to establish measurement validity and reliability and to impute latent variables (i.e. constructs) scores.

Aligning human resource (HR) strategies with these identified knowledge communities enables organizations to strategically enhance comprehensive training programs promoting sustainable practices and soft skills. Tailored training and workforce development programs for each community are recommended, with the proposal of active training methods like Lego Serious Play to dynamically engage employees. As organizations increasingly invest in training, this research offers valuable insights for educators and industry professionals to better cultivate and apply soft skills to develop employee sustainability practices and enhance employee development.

Although this study’s findings are not generalizable to the population, they are useful when considering critical sustainability knowledge and soft skills necessary for employees in the hospitality industry. The convenience sample of this study could have been more robust, with participants with greater tenure in the industry or a better understanding of sustainable practices and soft skill competencies. This research used a Qualtrics survey to gather subject responses. This may have caused biases in responding to the survey, such as a central tendency, immediacy, the rater’s knowledge about each criterion or boredom with the survey length.

The practical implications drawn from this study’s findings offer actionable insights for organizations seeking to enhance sustainability practices within their workforce. As one navigates the diverse landscape of employee categories, including sustainable champions, emerging learners and skillful initiators, it becomes evident that a one-size-fits-all approach to training and workforce education is not conducive to cultivating a sustainable culture. In this section, some possible practical strategies tailored to each employee category are suggested, ensuring that organizations can effectively harness the unique strengths and development needs within their workforce.

Using a social cognitive theoretical lens (Bandura, 1977), sustainable catalysts' elevated knowledge levels make them influential contributors to the organization’s sustainability goals, while their adeptness in soft skills positions them as effective communicators, collaborators and leaders in fostering a culture of sustainability. Figure 1b displays this idea. As such, sustainable catalysts were present four times in the effectiveness of the top five soft skills, meaning these sustainable catalysts should be the area of primary focus as they can assist organizations by educating other employees due to their enhanced soft skills and level of sustainability knowledge.

Rooted in social cognitive theory, this study investigated how HR practices can effectively shape sustainability-related workforce development in the workplace. The results identified distinct knowledge communities – sustainable catalysts, skillful initiators, emerging learners and sustainable champions – aligned with quadrants of sustainable practice effectiveness. Aligning HR strategies with these identified knowledge communities enables organizations to strategically enhance comprehensive training programs promoting sustainable practices and soft skills.