Search results

The Polish economy has undergone major challenges and changes over the past few decades. The country's trade flows, in particular, have become more firmly tied to the country’s Western neighbors as they have grown in volume. This study examines Poland's trade balances in ten Standard International Trade Classification (SITC) sectors versus the United States of America, first testing for and isolating structural breaks in each time series. These breaks are then included in a set of the cointegration models to examine their macroeconomic determinants.

Linear and nonlinear and nonlinear autoregressive distributed lag models, both with and without dummies corresponding to structural breaks, are estimated.

One key finding is that incorporating these breaks reduces the significance of the real exchange rate in the model, supporting the hypothesis that this variable already incorporates important information. It also results in weaker evidence for cointegration of all variables in certain sectors.

This study looks only at one pair of countries, without any third-country effects.

An important country pair's trade relations is examined; in addition, the real exchange rate is shown to incorporate economic information that results in structural changes in the economy. The paper extends the existing literature by conducting an analysis of Poland's trade balances with the USA, which have not been studied in such a context so far. A strong point is a broad methodology that lets compare the results the authors obtained with different kinds of models, both linear and nonlinear ones, with and without structural breaks.

The surface characteristics of thermally and chemically modified wood, such as surface roughness, surface free energy (SFE) and wettability, are important properties that influence further manufacturing processes such as gluing and coating. The aim of this paper was to determine the influence of the surface roughness of thermally and chemically modified teak wood on their SFE, wettability and bonding quality for water-based acrylic and solvent-based alkyd varnishes. In addition, durability against subterranean termites in the field of these modified teak woods was also investigated to give a valuable information for their further application.

The woods tested in this study were fast-growing teak woods that were prepared in untreated and treated with furfuryl alcohol (FA), glycerol maleic anhydride (GMA) and thermal. SFE values were calculated using the Rabel method. The wettability values were measured based on the contact angle between varnish liquids and wood surfaces using the sessile drop method, and the Shi and Gardner model model was used to evaluate the wettability of the varnishes on the wood surface. The bonding quality of the varnishes was measured using a cross-cut test based on ASTM 3359-17 standard. In addition, durability against subterranean termites in the field of these modified teak woods was also investigated according to ASTM D 1758-06.

The results showed that furfurylated and GMA-thermal 220°C improved the durability of teak wood against termites. The furfurylated teak wood had the roughest surface with an arithmetic average roughness (Ra) value of 15.65 µm before aging and 27.11 µm after aging. The GMA-thermal 220°C treated teak wood was the smoothest surface with Ra value of 6.44 µm before aging and 13.75 µm after aging. Untreated teak wood had the highest SFE value of 46.90 and 57.37 mJ/m² before and after aging, respectively. The K values of untreated and treated teak wood increased owing to the aging treatment. The K values for the water-based acrylic varnish were lower than that of the solvent-based alkyd varnish. The untreated teak wood with the highest SFE produced the highest bonding quality (grades 4–5) for both acrylic and alkyd varnishes. The solvent-based alkyd varnish was more wettable and generated better bonding quality than the water-based acrylic varnish.

The originality of this research work is that it provides evaluation values of the durability and SFE. The SFE value can be used to quantitatively determine the wettability of paint liquids on the surface of wood and its varnish bonding quality.

Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.

PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.

PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.

The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.

This study aims to uncover apple preference and consumption in Indonesia, to disclose the risk of non-halal contamination of apples and the importance of maintaining the halal integrity of apples along the supply chain and to uncover the impacts of food miles of apples along supply chain segmentation.

This study adopted mixed research methods under a fully mixed sequential dominant status design (QUAN → qual). Data were collected through a survey in some Indonesian provinces (N = 396 respondents). Samples were collected randomly from individual consumers. The qualitative data were collected through interviews with 15 apple traders in Indonesia. Data were analysed using crosstab, chi-square and descriptive analysis.

First, Muslim consumers believe in the risk of chemical treatment of apples because it can affect the halal status of apples. Second, Indonesian consumers consider the importance of halal certification of chemical-treated apples and the additives for apple treatments. Third, the insignificance of domestic apple preference contributes to longer food miles at the first- and middle-mile stages (preference for imported apples). Fourth, apple consumption and shopping distance contribute to the longer food miles problem at the last-mile stage. Fifth, longer food miles have negative impacts, such as emissions and pollution, food loss and waste, food insecurity, financial loss, slow development of the local economy and food unsafety.

This research has implications for the governments, farmers, consumers (society) and business sectors.

This study proposes a framework of food miles under a halal supply chain (halal food miles) to reduce the risk of food miles and improve halal integrity. The findings from this research have theoretical implications for the development of the food mile theory, halal food supply chain and green supply chain.

The main purpose of this paper is to explore whether the nature of innovation is accumulative or radical and to what extent past year accumulation of technology stock can predict future innovation. More importantly, the authors are concerned with whether a change of policy regime or a variance in the quality of technology will moderate the nature of innovation.

The authors examined a dataset of 3.6 million Chinese patents during 1985–2015 and constructed more than 5 million citation pairs across 8 sections and 128 classes to track knowledge spillover across technology fields. The authors used this citation dataset to calculate the technology innovation network. The authors constructed a measure of upstream invention, interacting the pre-existing technology innovation network with historical patent growth in each technology field, and estimated measure's impact on future innovation since 2005. The authors also constructed three sets of metrics – technology dependence, centrality and scientific value – to identify innovation quality and a policy dummy to consider the impact of policy on innovation.

Innovation growth is built upon past year accumulation and technology spillover. Innovation grows faster for technologies that are more central and grows more slowly for more valuable technologies. A pro-innovation and pro-intellectual property right (IPR) policy plays a positive and significant role in driving technical progress. The authors also found that for technologies that have faster access to new information or larger power to control knowledge flow, the upstream and downstream innovation linkage is stronger. However, this linkage is weaker for technologies that are more novel or general. On most occasions, the nature of innovation was less responsive to policy shock.

This paper contributes to the debate on the nature of innovation by determining whether upstream innovation has strong predictive power on future innovation. The authors develop the assumption used in the technology spillover literature by considering a time-variant, directional and asymmetric matrix to model technology diffusion. For the first time, the authors answer how the nature of innovation will vary depending on the technology network configurations and policy environment. In addition to contributing to the academic debate, the authors' study has important implications for economic growth and industrial or innovation management policies.