Search results
1 – 10 of 14Guillermo Guerrero-Vacas, Jaime Gómez-Castillo and Oscar Rodríguez-Alabanda
Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using…
Abstract
Purpose
Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.
Design/methodology/approach
PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.
Findings
PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.
Originality/value
The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.
Details
Keywords
C.W. Chathurani Silva, Dilini Dineshika Rathnayaka and M.A.C.S. Sampath Fernando
This study aims to evaluate the adoption of four types of supplier sustainability risk management (SSRM) strategies, namely, risk avoidance (RA), risk acceptance (RAC)…
Abstract
Purpose
This study aims to evaluate the adoption of four types of supplier sustainability risk management (SSRM) strategies, namely, risk avoidance (RA), risk acceptance (RAC), collaboration-based risk mitigation (CBM) and monitoring-based risk mitigation (MBM) in Sri Lankan apparel and retail industries, and to investigate their effect on supply chain performance (SCP).
Design/methodology/approach
This study uses the dynamic capability view (DCV) to develop its hypotheses. Data collected from 89 firms were analysed using partial least square (PLS) structural equation modelling and PLS-based multiple group analysis.
Findings
Sri Lankan apparel and retail firms adopt RA and MBM strategies relatively more than CBM and RAC strategies, whereas there is no significant difference between the two industries in terms of the use of SSRM strategies. The path analysis revealed significant effects of RA and RAC strategies on SCP of both industries. The effect of CBM strategy on SCP is moderated by industry, while MBM has no significant impact.
Research limitations/implications
While managing supplier sustainability risks effectively, RA and RAC strategies provide more opportunities for managers to improve SCP. In achieving SCP, CBM strategies are proven to be more effective for retail industry compared with the apparel sector. Although MBM strategies offer sustainability advantages to firms, their contribution to improving the performance of apparel and retail supply chains is not significant. This research is limited to only two industries (apparel and retail) in Sri Lanka, where the evidence for the effects of SSRM strategies is not available for other contexts.
Originality/value
Either the effects of the four types of SSRM strategies on SCP or the moderating effect of industry on these effects have not been empirically confirmed in the literature. Evaluating the extent to which different strategies are implemented in Sri Lankan apparel and retail industries is another significant contribution of this research. Furthermore, this study contributes by using DCV to a sustainability-based supply chain risk management research.
Details
Keywords
The purpose of this study is to develop and validate the business streamlining (BS) model proposed in 2017.
Abstract
Purpose
The purpose of this study is to develop and validate the business streamlining (BS) model proposed in 2017.
Design/methodology/approach
This study/paper develops and validates the qualitatively generated BS model, a conceptual model of service sourcing relationships, by testing it quantitatively. A survey was sent to chief exective officers, chief purchasing officers or facility managers in 764 private or public companies in Sweden with an annual turnover exceeding € 10m. The categories were tested and analyzed by means of factor analysis.
Findings
The BS model for managing service sourcing processes was confirmed to be significant overall, meaning that it is applicable irrespective of service sourcing context. The efficiency pursuing (EP) was found to have an interlinking role that calls for a revision of the BS model. Furthermore, the four categories tended to load pairwise.
Research limitations/implications
Although this cross-sectional study confirms the relevance of the BS model for managing service-sourcing processes, further studies should examine both the relative significance of its categories in different service-sourcing contexts and why the four main categories tend to pair.
Practical implications
The results support that the model is flexible and adaptable to a wide range of service-sourcing circumstances. Irrespective of the relative complexity of facility management (FM) sourcing processes, the categories can be adapted to fit the service sourcing context. Thus, it can be used as a tool to analyze and facilitate strategic decision-making.
Originality/value
The paper validates that the BS model can represent the dynamics of different service-sourcing processes, regardless of the complexity of the context.
Details
Keywords
Giulia Gastaldello, Guenter Schamel, Nadia Streletskaya and Luca Rossetto
Virtual wine experiences (VWEs) replaced in-person wine experiences during the Covid-19 pandemic and continue to be offered by some actors. This study aims to investigate the…
Abstract
Purpose
Virtual wine experiences (VWEs) replaced in-person wine experiences during the Covid-19 pandemic and continue to be offered by some actors. This study aims to investigate the factors driving interest in VWEs and identify relevant traits of potential consumers to help assess VWEs long-term potential.
Design/methodology/approach
A representative sample of 399 Oregon and California wine consumers answered a structured online survey. The authors combine ordered logistic regression and qualitative techniques to analyze the data.
Findings
VWEs may effectively attract potential wine consumers and tourists. High interest in VWEs is associated with strong wine involvement and intentions to visit wine regions. Digitization, aversion to travel-related risk and convenience are other relevant drivers of VWE interest. The segmentation analysis revealed that consumers with a potentially higher interest in VWE have distinct traits.
Practical implications
Wineries and wine tourism destinations could leverage VWEs to attract wine tourists and consumers. The authors discuss specific characteristics of high-interest consumers.
Originality/value
Participants in VWEs interact with hosts and explore products in real time. This engagement has long-term marketing potential for attracting them as customers or visitors. The study provides strategic information for practitioners and academics on VWE interest drivers and potential demand, which is currently missing from the literature.
Details
Keywords
This study aims to explore the relationship between risk governance characteristics (chief risk officer [CRO], chief financial officer [CFO] and senior directors [SENIOR]) and…
Abstract
Purpose
This study aims to explore the relationship between risk governance characteristics (chief risk officer [CRO], chief financial officer [CFO] and senior directors [SENIOR]) and regulatory adjustments (RAs) in Organization for Economic Cooperation and Development public commercial banks.
Design/methodology/approach
Using principal component analysis (PCA) and regression models, the research analyzes a representative data set of these banks.
Findings
A significant negative correlation between risk governance characteristics and RAs is found. Sensitivity analysis on the regulatory Tier 1 capital ratio and the total capital ratio indicates mixed outcomes, suggesting a complex relationship that warrants further exploration.
Research limitations/implications
The study’s limited sample size calls for further research to confirm findings and explore risk governance’s impact on banks’ capital structures.
Practical implications
Enhanced risk governance could reduce RAs, influencing banking policy.
Social implications
The study advocates for improved banking regulatory practices, potentially increasing sector stability and public trust.
Originality/value
This study contributes to understanding risk governance’s role in regulatory compliance, offering insights for policymaking in banking.
Details
Keywords
Martin Novák, Berenika Hausnerova, Vladimir Pata and Daniel Sanetrnik
This study aims to enhance merging of additive manufacturing (AM) techniques with powder injection molding (PIM). In this way, the prototypes could be 3D-printed and mass…
Abstract
Purpose
This study aims to enhance merging of additive manufacturing (AM) techniques with powder injection molding (PIM). In this way, the prototypes could be 3D-printed and mass production implemented using PIM. Thus, the surface properties and mechanical performance of parts produced using powder/polymer binder feedstocks [material extrusion (MEX) and PIM] were investigated and compared with powder manufacturing based on direct metal laser sintering (DMLS).
Design/methodology/approach
PIM parts were manufactured from 17-4PH stainless steel PIM-quality powder and powder intended for powder bed fusion compounded with a recently developed environmentally benign binder. Rheological data obtained at the relevant temperatures were used to set up the process parameters of injection molding. The tensile and yield strengths as well as the strain at break were determined for PIM sintered parts and compared to those produced using MEX and DMLS. Surface properties were evaluated through a 3D scanner and analyzed with advanced statistical tools.
Findings
Advanced statistical analyses of the surface properties showed the proximity between the surfaces created via PIM and MEX. The tensile and yield strengths, as well as the strain at break, suggested that DMLS provides sintered samples with the highest strength and ductility; however, PIM parts made from environmentally benign feedstock may successfully compete with this manufacturing route.
Originality/value
This study addresses the issues connected to the merging of two environmentally efficient processing routes. The literature survey included has shown that there is so far no study comparing AM and PIM techniques systematically on the fixed part shape and dimensions using advanced statistical tools to derive the proximity of the investigated processing routes.
Details
Keywords
Managers must make numerous strategic decisions in order to initiate and implement a business model innovation (BMI). This paper examines how managers perceive the management team…
Abstract
Purpose
Managers must make numerous strategic decisions in order to initiate and implement a business model innovation (BMI). This paper examines how managers perceive the management team interacts when making BMI decisions. The paper also investigates how group biases and board members’ risk willingness affect this process.
Design/methodology/approach
Empirical data were collected through 26 in-depth interviews with German managing directors from 13 companies in four industries (mobility, manufacturing, healthcare and energy) to explore three research questions: (1) What group effects are prevalent in BMI group decision-making? (2) What are the key characteristics of BMI group decisions? And (3) what are the potential relationships between BMI group decision-making and managers' risk willingness? A thematic analysis based on Gioia's guidelines was conducted to identify themes in the comprehensive dataset.
Findings
First, the results show four typical group biases in BMI group decisions: Groupthink, social influence, hidden profile and group polarization. Findings show that the hidden profile paradigm and groupthink theory are essential in the context of BMI decisions. Second, we developed a BMI decision matrix, including the following key characteristics of BMI group decision-making managerial cohesion, conflict readiness and information- and emotion-based decision behavior. Third, in contrast to previous literature, we found that individual risk aversion can improve the quality of BMI decisions.
Practical implications
This paper provides managers with an opportunity to become aware of group biases that may impede their strategic BMI decisions. Specifically, it points out that managers should consider the key cognitive constraints due to their interactions when making BMI decisions. This work also highlights the importance of risk-averse decision-makers on boards.
Originality/value
This qualitative study contributes to the literature on decision-making by revealing key cognitive group biases in strategic decision-making. This study also enriches the behavioral science research stream of the BMI literature by attributing a critical influence on the quality of BMI decisions to managers' group interactions. In addition, this article provides new perspectives on managers' risk aversion in strategic decision-making.
Details
Keywords
Iryna Alves, Bruno Gregório and Sofia M. Lourenço
This study investigates theoretical relationships among personality characteristics, preferences for different types of rewards and the propensity to choose a job in auditing by…
Abstract
Purpose
This study investigates theoretical relationships among personality characteristics, preferences for different types of rewards and the propensity to choose a job in auditing by management-related higher education students. Specifically, the authors consider motivation, locus of control (internal and external) and self-efficacy (SE) as personality characteristics and financial, extrinsic, support and intrinsic as types of rewards.
Design/methodology/approach
Data were collected through a questionnaire targeted at management-related higher education students in Portugal. Partial least squares structural equation modelling was used to analyse the data.
Findings
The full sample results show that different types of motivation, locus of control and SE are related to different reward preferences. The authors also find a positive association between a preference for extrinsic rewards and the propensity to choose a job in auditing. Moreover, when the authors consider the role of working experience in the model, the authors find that the reward preferences that drive the choice of an auditing job differ according to that experience.
Originality/value
This study enriches the literature by assessing preferences for different types of rewards, considering multiple personality characteristics and a comprehensive set of rewards. Furthermore, the authors identify the reward preferences that drive the choice of an auditing career. This knowledge empowers auditing firms to devise recruitment strategies that resonate with candidates’ preferences, which boosts the capacity of these companies to attract new auditors.
Details
Keywords
Jayakrishna Kandasamy, Fazleena Badurdeen and Tharanga Rajapakshe
Rafael Pereira Ferreira, Louriel Oliveira Vilarinho and Americo Scotti
This study aims to propose and evaluate the progress in the basic-pixel (a strategy to generate continuous trajectories that fill out the entire surface) algorithm towards…
Abstract
Purpose
This study aims to propose and evaluate the progress in the basic-pixel (a strategy to generate continuous trajectories that fill out the entire surface) algorithm towards performance gain. The objective is also to investigate the operational efficiency and effectiveness of an enhanced version compared with conventional strategies.
Design/methodology/approach
For the first objective, the proposed methodology is to apply the improvements proposed in the basic-pixel strategy, test it on three demonstrative parts and statistically evaluate the performance using the distance trajectory criterion. For the second objective, the enhanced-pixel strategy is compared with conventional strategies in terms of trajectory distance, build time and the number of arcs starts and stops (operational efficiency) and targeting the nominal geometry of a part (operational effectiveness).
Findings
The results showed that the improvements proposed to the basic-pixel strategy could generate continuous trajectories with shorter distances and comparable building times (operational efficiency). Regarding operational effectiveness, the parts built by the enhanced-pixel strategy presented lower dimensional deviation than the other strategies studied. Therefore, the enhanced-pixel strategy appears to be a good candidate for building more complex printable parts and delivering operational efficiency and effectiveness.
Originality/value
This paper presents an evolution of the basic-pixel strategy (a space-filling strategy) with the introduction of new elements in the algorithm and proves the improvement of the strategy’s performance with this. An interesting comparison is also presented in terms of operational efficiency and effectiveness between the enhanced-pixel strategy and conventional strategies.
Details