Search results

As the scale of mega transportation infrastructure projects (MTIs) continues to expand, the complexity of engineering construction sharply increases and decision-making sustainability faces severe challenges. Decision-making for mega transportation infrastructure projects unveils the knowledge-intensive characteristic, requiring collaborative decisions by cross-domain decision-makers. However, the exploration of heterogeneous knowledge fusion-driven decision-making problems is limited. This study aims to improve the deficiencies of existing decision-making by constructing a knowledge fusion-driven multi-attribute group decision model under fuzzy context to improve the sustainability of MTIs decision-making.

This study utilizes intuitionistic fuzzy information to handle uncertain information; calculates decision-makers and indicators weights by hesitation, fuzziness and intuitionistic fuzzy entropy; applies the intuitionistic fuzzy weighted averaging (IFWA) operator to fuse knowledge and uses consensus to measure the level of knowledge fusion. Finally, a calculation example is given to verify the rationality and effectiveness of the model.

This research finally constructs a two-level decision model driven by knowledge fusion, which alleviates the uncertainty and fuzziness of decision knowledge, promotes knowledge fusion among cross-domain decision-makers and can be effectively applied in practical applications.

This study provides an effective decision-making model for mega transportation infrastructure projects and guides policymakers.

A cross-domain intelligent software-defined network (SDN) routing method based on a proposed multiagent deep reinforcement learning (MDRL) method is developed.

First, the network is divided into multiple subdomains managed by multiple local controllers, and the state information of each subdomain is flexibly obtained by the designed SDN multithreaded network measurement mechanism. Then, a cooperative communication module is designed to realize message transmission and message synchronization between the root and local controllers, and socket technology is used to ensure the reliability and stability of message transmission between multiple controllers to acquire global network state information in real time. Finally, after the optimal intradomain and interdomain routing paths are adaptively generated by the agents in the root and local controllers, a network traffic state prediction mechanism is designed to improve awareness of the cross-domain intelligent routing method and enable the generation of the optimal routing paths in the global network in real time.

Experimental results show that the proposed cross-domain intelligent routing method can significantly improve the network throughput and reduce the network delay and packet loss rate compared to those of the Dijkstra and open shortest path first (OSPF) routing methods.

Message transmission and message synchronization for multicontroller interdomain routing in SDN have long adaptation times and slow convergence speeds, coupled with the shortcomings of traditional interdomain routing methods, such as cumbersome configuration and inflexible acquisition of network state information. These drawbacks make it difficult to obtain global state information about the network, and the optimal routing decision cannot be made in real time, affecting network performance. This paper proposes a cross-domain intelligent SDN routing method based on a proposed MDRL method. First, the network is divided into multiple subdomains managed by multiple local controllers, and the state information of each subdomain is flexibly obtained by the designed SDN multithreaded network measurement mechanism. Then, a cooperative communication module is designed to realize message transmission and message synchronization between root and local controllers, and socket technology is used to ensure the reliability and stability of message transmission between multiple controllers to realize the real-time acquisition of global network state information. Finally, after the optimal intradomain and interdomain routing paths are adaptively generated by the agents in the root and local controllers, a prediction mechanism for the network traffic state is designed to improve awareness of the cross-domain intelligent routing method and enable the generation of the optimal routing paths in the global network in real time. Experimental results show that the proposed cross-domain intelligent routing method can significantly improve the network throughput and reduce the network delay and packet loss rate compared to those of the Dijkstra and OSPF routing methods.

This study aims to explore the impact of multisource deformation errors on the oil film contact surface, which arise from manufacturing, assembly, oil pressure and thermal influences, on the motion accuracy of hydrostatic guideway.

Using thermal-structural coupling simulations, this research investigates the effects of assembly, oil pressure and thermal factors on deformation errors of the oil film contact surface. By integrating these with manufacturing errors, a profile error model for the oil film contact surface is developed, characterizing the cumulative effect of these errors. Using kinematic theory and progressive Mengen flow controller characteristics, the motion error at any position of the hydrostatic guideway is quantified, examining how surface error traits impact motion accuracy.

The error averaging effect is affected by the profile error of oil film contact surface. Meanwhile, the motion accuracy of hydrostatic guideway is highly sensitive to the oil film contact surface error amplitude.

This approach allows for precise prediction and analysis of motion accuracy in hydrostatic guideways during the design and manufacturing stages. It also provides guidance for planning process tolerances.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2024-0063/

Considering the bounded confidence of decision-makers (DMs), a new grey multi-criteria group consensus decision-making (GMCGCDM) model is established by using interval grey number (IGN), cobweb model, social network analysis (SNA) and consensus reaching process (CPR).

Firstly, the model analyzes the social relationship of DM under social networks and proposes a calculation method for DMs’ weights based on SNA. Secondly, the model defines a cobweb model to consider the preferences of decision-making alternatives in the decision-making process. The consensus degree is calculated by the area surrounded by the connections between each index value of DMs and the group. Then, the model coordinates the different opinions of various DMs to reduce the degree of bias of each DM and designs a consensus feedback mechanism based on bounded confidence to guide DMs to reach consensus.

The advantage of the proposed method is to highlight the practical application, taking the selection of low-carbon suppliers in the context of dual carbon as an example. Comparison analysis is performed to reveal the interpretability and applicability of the method.

The main contribution of this paper is to propose a new GMCGCDM model, which can not only expand the calculation method of DM’s weight and consensus degree but also reduce the time and cost of decision-making.

The aim of this paper is to review the literature on the prediction of cutting tool life. Tool life is typically estimated by predicting the time to reach the threshold flank wear width. The cutting tool is a crucial component in any machining process, and its failure affects the manufacturing process adversely. The prediction of cutting tool life by considering several factors that affect tool life is crucial to managing quality, cost, availability and waste in machining processes.

This study has undertaken the critical analysis and summarisation of various techniques used in the literature for predicting the life or remaining useful life (RUL) of the cutting tool through monitoring the tool wear, primarily flank wear. The experimental setups that comprise diversified machining processes, including turning, milling, drilling, boring and slotting, are covered in this review.

Cutting tool life is a stochastic variable. Tool failure depends on various factors, including the type and material of the cutting tool, work material, cutting conditions and machine tool. Thus, the life of the cutting tool for a particular experimental setup must be modelled by considering the cutting parameters.

This submission discusses tool life prediction comprehensively, from monitoring tool wear, primarily flank wear, to modelling tool life, and this type of comprehensive review on cutting tool life prediction has not been reported in the literature till now. The future suggestions provided in this review are expected to provide avenues to solve the unexplored challenges in this field.

Given the unique nature of business events tourism, this paper evaluates the forecasting performance of various models using search query data (SQD) to forecast convention attendance.

This research uses monthly and quarterly business event attendance data from both the U.S. (Las Vegas) and China (Macau) markets. Using SQD as the input, we evaluated and compared the cutting-edge forecasting models including Prophet and Long Short-Term Memory (LSTM).

The study reveals that Prophet outperforms complex neural network models in forecasting business event tourism demand. Keywords related to convention facilities, conventions or exhibitions, and transportation are proven to be useful in forecasting business travel demand.

Prophet is an accessible forecasting model for event-tourism practitioners, especially useful in the volatile business event tourism sector. Using verified search keywords in models helps understand traveler motivations and aids event planning.

Our study is among the first to empirically evaluate the performance of forecasting models for business travel demand. In comparison with other mainstream forecasting models, our study extends the scope to examine both the U.S. and Chinese markets.

The purpose of this paper is to assess the hydrogen embrittlement sensitivity of carbon gradient heterostructure materials and to verify the reliability of the scratch method.

The surface-modified layer of 18CrNiMo7-6 alloy steel was delaminated to study its hydrogen embrittlement characteristics via hydrogen permeation, electrochemical hydrogen charging and scratch experiments.

The results showed that the diffusion coefficients of hydrogen in the surface and matrix layers are 3.28 × 10⁻⁷ and 16.67 × 10⁻⁷ cm²/s, respectively. The diffusible-hydrogen concentration of the material increases with increasing hydrogen-charging current density. For a given hydrogen-charging current density, the diffusible-hydrogen concentration gradually decreases with increasing depth in the surface-modified layer. Fracture toughness decreases with increasing diffusible-hydrogen concentration, so the susceptibility to hydrogen embrittlement decreases with increasing depth in the surface-modified layer.

The reliability of the scratch method in evaluating the fracture toughness of the surface-modified layer material is verified. An empirical formula is given for fracture toughness as a function of diffused-hydrogen concentration.

During the forming process, aluminum alloy sheets develop various types of textures and are subjected to cyclic loading as structural components, resulting in fatigue damage. This study aims to develop polycrystalline models with different orientation distributions and incorporate suitable fatigue indicator parameters to investigate the effect of orientation distribution on the mechanical properties of Al-7.02Mg-1.78Zn alloys under cyclic loading.

In this study, a two-dimensional polycrystalline model with 150 equiaxed grains was constructed based on optical microscope images. Subsequently, six different orientation distributions were assigned to this model. The fatigue indicator parameter of strain energy dissipation is utilized to analyze the stress response and fatigue crack driving force in polycrystalline models with different orientation distributions subjected to cyclic loading.

The study found that orientation distribution significantly influences fatigue crack initiation. Orientation distributions with a larger average Schmid factor exhibit reduced stress response and lower fatigue indicator parameters. Locations with a larger average Schmid factor experience greater plastic deformation and present a higher risk for fatigue crack initiation. RVE with a single orientation undergoes more rotation to reach cyclic steady state under cyclic loading due to the ease of deformation transfer.

Currently, there are no reports in the literature on the calculation of fatigue crack initiation for Al-Mg-Zn alloys using the crystal plasticity finite element method. This study presents a novel strategy for simulating the response of Al-7.02Mg-1.78Zn materials with different orientation distributions under symmetric strain cyclic loading, providing valuable references for future research.

Polyaniline (PANI) has garnered attention for its potential applications in anticorrosion fields because of its unique properties. Satisfactory outcomes have been achieved when using PANI as a functional filler in organic coatings. More recently, research has extensively explored PANI-based organic coatings with self-healing properties. The purpose of this paper is to provide a summary of the active agents, methods and mechanisms involved in the self-healing of organic coatings.

This study uses specific doped acids and metal corrosion inhibitors as active and self-healing agents to modify PANI using the methods of oxidation polymerization, template synthesis, nanosheet carrier and nanocontainer loading methods. The anticorrosion performance of the coatings is evaluated using EIS, LEIS and salt spray tests.

Specific doped acids and metal corrosion inhibitors are used as active agents to modify PANI and confer self-healing properties to the coatings. The coatings’ active protection mechanism encompasses PANI’s own passivation ability, the adsorption of active agents and the creation of insoluble compounds or complexes.

This paper summarizes the active agents used to modify PANI, the procedures used for modification and the self-healing mechanism of the composite coatings. It also proposes future directions for developing PANI organic coatings with self-healing capabilities. The summaries and proposals presented may facilitate large-scale production of the PANI organic coatings, which exhibit outstanding anticorrosion competence and self-healing properties.