Search results

The purpose of this study is to analyze the environmental efficiency level and trend of the transportation sector in the upper–mid–downstream of the Yangtze River Economic Belt and the JingJinJi region in China and assess the effectiveness of policies for protecting the low-carbon environment.

This study uses the meta-frontier slack-based measure (SBM) approach to evaluate environmental efficiency, which targets and classifies specific regions into regional groups. First, this study employs the SBM with the undesirable outputs to construct the environmental efficiency measurement models of the four regions under the meta-frontier and group frontiers, respectively. Then, this study uses the technology gap ratio to evaluate the gap between the group frontier and the meta-frontier.

The analysis reveals several key findings: (1) the JingJinJi region and the downstream of the YEB had achieved the overall optimal production technology in transportation than the other two regions; (2) significant technology gaps in environmental efficiency were observed among these four regions in China; and (3) the downstream region of the YEB exhibited the lowest levels of energy consumption and excessive CO₂ emissions.

To evaluate the differences in environmental efficiency resulting from regions and technological gaps in transportation, this study employs the meta-frontier model, which overcomes the limitation of traditional environmental efficiency methods. Furthermore, in the practical, the study provides the advantage of observing the disparities in transportation efficiency performed by the Yangtze River Economic Belt and the Beijing–Tianjin–Hebei regions.

In this paper, we evaluated the impact of the US “Chip Act” on the participation of the Chinese electronics industry in the global value chain based on the dynamic CGE model. This is a meaningful attempt to use the GTAP-VA model to analyze the electronics industry in China.

We employ a Dynamic GTAP-VA Model to quantitatively evaluate the economic repercussions of the “Chip Act” on the Chinese electronic industries' GVC participation from 2023 to 2040.

The findings depict a discernible contraction in China’s electronic sector by 2040, marked by a −2.95% change in output, a −3.50% alteration in exports and a 0.45% increment in imports. Concurrently, the U.S., EU and certain Asian economies exhibit expansions within the electronic sector, indicating a GVC realignment. The “Chip Act” implementation precipitates a significant divergence in GVC participation across different countries and industries, notably impacting the electronics sector.

Through a meticulous temporal analysis, this manuscript unveils the nuanced economic shifts within the GVC, substantially bridging the empirical void in existing literature. This narrative accentuates the profound implications of policy regulations on global trade dynamics, contributing to the discourse on international economic policy and industry evolution.

We evaluated the impact of the US “Chip Act” on the participation of the Chinese electronics industry in the global value chain based on the dynamic CGE model. This is a meaningful attempt to use the GTAP-VA model to analyze the electronics industry in China.

The interaction between policy regulations and global value chain (GVC) dynamics is pivotal in understanding the contemporary global trade framework, especially within technology-driven sectors. The US “Chips Act” represents a significant regulatory milestone with potential ramifications on the Chinese electronic industries' engagement in the GVC.

The significance of this paper is that it quantifies for the first time the impact of the US Chip Act on the GVC participation index of East Asian countries in the context of US-China decoupling. With careful consideration of strategic aspects, this paper substantially fills the empirical gap in the existing literature by presenting subtle economic changes within GVCs, highlighting the profound implications of policy regulation on global trade dynamics.

Digitalisation is perceived as a new process that may add value to firms. Current theoretical understanding assumes it should be part of a firm's strategy to respond to multiple pressures in the business environment. This paper explores the occurrence of digitalisation in a rare context, that of the English agricultural industry in the United Kingdom, a place disproportionality filled with family firms. The general understanding of digitalisation in family firm settings remains embryonic. The authors' explorations make theoretical contributions to research at the intersection of rural entrepreneurship, family business and innovation.

Utilising a purposive, qualitative approach, primary data was collected from multiple interviews with 28 UK family farms, and secondary data from another 164. Interview transcripts were coded using NVivo, along with secondary data from reports, observations and websites.

The authors present empirical evidence illustrating how digitalisation manifests incrementally and radically in different types of family farms. The authors present a model that shows the areas of farming that have, and continue to be, digitalised. This increases analytical precision when identifying digitalisation activities that differ depending on the strategy to either scale or diversify. The authors propose that incremental digitalising occurs to a great extent during a scaling strategy, and that radical digitalising occurs to a smaller extent during diversification strategies in family farms.

This research uses a sample of family-run farms from the UK agricultural sector to explore nuanced elements of digitalisation. It should therefore be explored in other types of family firms located in different sectors and geographies.

This research is important because family farms are under increasing pressure and have limited financial resources to deal with the digitalisation agenda. Therefore, empirical evidence helps other farms in similar situations. The authors found digitalisation investments, that tend to be capital intensive, only matter for scalers and less so for diversifiers. Family farms can use the model presented as a tool to evaluate their farm. The tool helps them define what to do, and ideate the potential activities that might be digitalised, to feed into their wider strategy.

Family firms, in particular farms, are critical to many economies. The general consenses currently assumes all family firms should digitalise, yet the authors' evidence suggests that this is not the case. It is important to create policies that are sensitive to the needs of different types of businesses, in this case between family firm scalers and diversifiers, instead of simply incentivising digitalisation using a blanket approach usually by offering financial aid. Understanding how digitisation can support (or not) family firm resilience and growth in an effective and efficient manner can have significant benefit to individual firms, and across industries.

The proposed model extends theoretical understanding linking strategy, digitalisation activity and innovation in family farms. It shows that digitalisation is a key building block of scaling strategies, maximising digitalisation to increase efficiency. Yet, diversifying family farms minimise digitalisation, whereby they only digitalise a small amount of the farming activity. This empirical evidence contrasts with the wider narrative that farmers are slower at using new technology. This research found that some are slower because it does not align with their strategy. However, sometimes digitalisation aligns with their strategy during external changes, in which case the diversifiers are quick to act.

Recently, there has been a shift toward the embodied energy assessment of buildings. However, the impact of material service life on the life-cycle embodied energy has received little attention. We aimed to address this knowledge gap, particularly in the context of the UAE and investigated the embodied energy associated with the use of concrete and other materials commonly used in residential buildings in the hot desert climate of the UAE.

Using input–output based hybrid analysis, we quantified the life-cycle embodied energy of a villa in the UAE with over 50 years of building life using the average, minimum, and maximum material service life values. Mathematical calculations were performed using MS Excel, and a detailed bill of quantities with >170 building materials and components of the villa were used for investigation.

For the base case, the initial embodied energy was 57% (7390.5 GJ), whereas the recurrent embodied energy was 43% (5,690 GJ) of the life-cycle embodied energy based on average material service life values. The proportion of the recurrent embodied energy with minimum material service life values was increased to 68% of the life-cycle embodied energy, while it dropped to 15% with maximum material service life values.

The findings provide new data to guide building construction in the UAE and show that recurrent embodied energy contributes significantly to life-cycle energy demand. Further, the study of material service life variations provides deeper insights into future building material specifications and management considerations for building maintenance.

This study aims to analyze and compare the relationship between international trade in global value chains (GVC) and greenhouse gas (GHG) emissions for Brazil and China from 2000 to 2016.

The input-output method apply to multiregional tables from Eora-26 to decompose the GHG emissions of the Brazilian and Chinese productive structure.

The data reveals that Chinese production and consumption emissions are associated with power generation and energy-intensive industries, a significant concern among national and international policymakers. For Brazil, the largest territorial emissions captured by the metrics come from services and traditional industry, which reveals room for improving energy efficiency. The analysis sought to emphasize how the productive structure and dynamics of international trade have repercussions on the environmental dimension, to promote arguments that guide the execution of a more sustainable, productive and commercial development strategy and offer inputs to advance discussions on the attribution of climate responsibility.

The metrics did not capture emissions related to land use and deforestation, which are representative of Brazilian emissions.

Comparative analysis of emissions embodied in traditional sectoral trade flows and GVC, on backward and forward sides, for developing countries with the main economic regions of the world.

This paper delves into a pivotal juncture within the co-production literature, intersecting with the ongoing debate about performance challenges in public sector accounting scholarship. It explores how public managers conceive and measure the performance of co-produced public services.

A case study is conducted on three instances of neighbourhood watching – that is, a type of collective co-production – in a homogeneous institutional setting. The analysis and interpretation of empirical data are guided by a systematic conceptual space delineating the qualities that performance criteria can take in contexts where public services are produced.

Findings reveal that when the co-production activation is driven by both state and lay actors, public managers tend to conceptualise and measure its performance in a way that contributes to building a more structured co-productive space, where the roles to play, how to interact and what to achieve are clearly defined.

This paper breaks new ground by scrutinising the conceptualisation of performance in settings where public services involve actors beyond traditional public administrations. By exploring the diverse “shapes” and meanings that performance can take in co-production arrangements, this paper enriches discussions on how public sector accounting can inform co-production literature.

This study aims to uncover the ongoing discourse on generative artificial intelligence (AI), literacy and governance while providing nuanced perspectives on stakeholder involvement and recommendations for the effective regulation and utilization of generative AI technologies.

This study chooses generative AI-related online news coverage on BBC News as the case study. Oriented by a case study methodology, this study conducts a qualitative content analysis on 78 news articles related to generative AI.

By analyzing 78 news articles, generative AI is found to be portrayed in the news in the following ways: Generative AI is primarily used in generating texts, images, audio and videos. Generative AI can have both positive and negative impacts on people’s everyday lives. People’s generative AI literacy includes understanding, using and evaluating generative AI and combating generative AI harms. Various stakeholders, encompassing government authorities, industry, organizations/institutions, academia and affected individuals/users, engage in the practice of AI governance concerning generative AI.

Based on the findings, this study constructs a framework of competencies and considerations constituting generative AI literacy. Furthermore, this study underscores the role played by government authorities as coordinators who conduct co-governance with other stakeholders regarding generative AI literacy and who possess the legislative authority to offer robust legal safeguards to protect against harm.

This paper aims to promote the higher quality development of high-tech enterprises in China. While science and technology have greatly promoted human civilization, resources have been excessively consumed and the environment has been sharply polluted. Therefore, it is particularly important for current enterprises to make use of scientific and technological innovation to maximize the benefits of mankind, minimize the loss of nature, and promote the sustainable development of our country.

By using DEA-Banker-Charnes-Cooper (BCC) model and DEA-Malmquist model, this paper comprehensively examines the innovation efficiency of high-tech enterprises from both static and dynamic perspectives, and conducts a provincial comparative study with the panel data of ten representative provinces from 2011 to 2020.

The research findings are as follows: the rapid number increase of high-tech enterprises in most provinces (cities) is accompanied by an ineffective input–output efficiency; the quality of high-tech enterprises needs to comprehensively examine both input–output efficiency and total factor productivity; and there is not a positive correlation between element investment and innovation performance.

Because the DEA model used in this paper assumes that the improvement direction of invalid units is to ensure that the input ratio of various production factors remains unchanged but sometimes the proportion of scientific and technological activities personnel and the total research and development investment is not constant. In the future, the nonradial DEA model can be considered for further research. Due to historical data statistics, more provinces, cities and longer panel data are difficult to obtain. The samples studied in this paper mainly refer to the provinces and cities that ranked first in the number of national high-tech enterprises in 2020. Limited by the number of samples, DEA analysis failed to select more input and output indicators. In the future, with the accumulation of statistical data, the existing efficiency analysis will be further optimized.

Aiming at the misunderstanding of emphasizing quantity and neglecting quality in the cultivation of high-tech enterprises, this paper comprehensively uses DEA-BCC model and DEA Malmquist index decomposition method to make a comprehensive comparative study on the development of high-tech enterprises in ten representative provinces (cities) from two aspects of static efficiency evaluation and dynamic efficiency evaluation.

The concept of productivity is central to performance management and decision-making, although it is complex and multifaceted. This paper aims to describe a methodology based on the use of Big Data in a cluster analysis combined with a data envelopment analysis (DEA) that provides accurate and reliable productivity measures in a large network of retailers.

The methodology is described using a case study of a leading kitchen furniture producer. More specifically, Big Data is used in a two-step analysis prior to the DEA to automatically cluster a large number of retailers into groups that are homogeneous in terms of structural and environmental factors and assess a within-the-group level of productivity of the retailers.

The proposed methodology helps reduce the heterogeneity among the units analysed, which is a major concern in DEA applications. The data-driven factorial and clustering technique allows for maximum within-group homogeneity and between-group heterogeneity by reducing subjective bias and dimensionality, which is embedded with the use of Big Data.

The use of Big Data in clustering applied to productivity analysis can provide managers with data-driven information about the structural and socio-economic characteristics of retailers' catchment areas, which is important in establishing potential productivity performance and optimizing resource allocation. The improved productivity indexes enable the setting of targets that are coherent with retailers' potential, which increases motivation and commitment.

This article proposes an innovative technique to enhance the accuracy of productivity measures through the use of Big Data clustering and DEA. To the best of the authors’ knowledge, no attempts have been made to benefit from the use of Big Data in the literature on retail store productivity.